Field-mountable connector for 10 Gigabit Ethernet applications

3rd April 2019
Posted By : Lanna Cooper
Field-mountable connector for 10 Gigabit Ethernet applications

 

Yamaichi Electronics has expanded its Y-Circ M12 product portfolio with a new field-mountable connector for 10 Gigabit Ethernet applications. The new connector is suitable for use in typical CAT.6A applications, e.g. in the communication cabling of automation control systems.

Areas of application
The field-assembled variant is used over moulded M12 cable assemblies, for example, when the cable has to be pulled through a cable duct and would be too bulky with the plug.

Field assemblies are suitable, even if the exact cable length can not be defined in advance.

Features and advantages
The connector face complies with the standardised M12 X coding according to DIN EN 61076-2-109. Thanks to its die-cast zinc housing, the Y-Circ M CAT.6A Field Assembly connector provides optimal transmission characteristics even in demanding environments.

When plugged in, it reaches protection class of IP67 and is thus optimally protected against adverse environmental influences.

Its slim design also proves itself in space-critical installation situations.

The quick and easy assembly offers a time advantage during installation. The cable simply has to be stripped and the wires of the cable pressed into the colour-coded slots in the back of the two-piece connector.

After the protruding wires are cut off, the IDC insulation displacement contacts connect automatically when the two parts are screwed together.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

productronica 2019
12th November 2019
Germany Messe München
SPS IPC Drives 2019
26th November 2019
Germany Nuremberg Messe
Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi