Connector housings offer sealing on the switch cabinet wall

1st December 2017
Posted By : Lanna Cooper
Connector housings offer sealing on the switch cabinet wall

 

HARTING has announced a new Han HP Direct series of connector housings which dispense with the classical bulkhead mounted housing and replaces it with two mounting flanges. As a result, the standard hood forms a seal directly on the switch cabinet wall, leading to beneficial space savings.

Installation requires only that the mounting flanges are screwed to the switch cabinet wall, which can be carried out using the standard panel cutouts of the Han B housing series. One side of the contact inserts is secured to the mounting flanges and the other side is screwed into the hood.

After mating, the hoods are attached to the mounting flanges via robust screw locking. Incorrect plugging can be prevented by using two coding elements on the side of the mounting flanges as well as on the side where the hood is.

The classic sizes of 6 B, 10 B, 16 B and 24 B are available. All sizes are available with side or top entry in sizes M20, M25, M32 and M40.

The new Han HP Direct housing system is available in three versions: a standard variant for indoor industrial applications featuring a grey powder surface with classic NBR seal; an EMC variant featuring an electrically conductive surface and seal for applications where a high degree of EMC protection is required; and an outdoor version featuring a black powder surface and UV and ozone-resistant FPM seals.

All variants come with IP protection classes IP66, IP68 and IP69K in the mated state. The hoods are made of corrosion-resistant, die-cast aluminium.

The Han HP Direct housing series is mainly intended for the machinery, robotics and energy application sectors, but can easily be used in other applications.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Startups Magazine Launch Party: Financing a Startup
24th July 2018
United Kingdom WeWork Waterhouse Square, London
European Microwave Week 2018
23rd September 2018
Spain Ifema Feria De Madrid
IoT Solutions World Congress 2018
16th October 2018
Spain Barcelona
Engineering Design Show 2018
17th October 2018
United Kingdom Ricoh Arena, Coventry
Maintec 2018
6th November 2018
United Kingdom NEC, Birmingham