Cables/Connecting

Displaying 3731 - 3740 of 3884

Waterproof Ethernet connectors for IDC and PC mounting

Waterproof Ethernet connectors for IDC and PC mounting
Bulgin’s IP68 Waterproof Ethernet Buccaneer family has been extended with two new panel mount versions. Using standard RJ45 connectors these connectors are now available for PCB mounting and IDC termination. The PX0839/PC is designed for direct PCB mounting. The connector is rear-of panel mounting, which in addition to providing an anchor point for the PCB, also allows assembly and, if necessary, testing before fitting to the panel. The connector is intended for volume applications where speed of construction without costly cabling is essential.
21st June 2007

Connector module for power transmission in motor applications

Connector module for power transmission in motor applications
HARTING has added a new power-transmission module to its Han-Modular industrial connector system. The new Han CD module is ideally suited to use with 3-phase motors and servomotors. The Han CD module incorporates three Han C power contacts (rated at 40A each) and four Han D signal contacts (rated at 10 A each), all with crimp termination. It is suitable for power transmission on three-phase motors where additional signal contacts are required - for a brake or for temperature measurement, for example. It has a high working voltage of 830V, making it also suitable for servomotor applications.
20th June 2007

Complete marine connector solution from Aerco

Complete marine connector solution from Aerco
Aerco now offers a comprehensive selection of connector backshells to fit the full range of marine bronze D38999 type connectors providing engineers, designers and buyers the option of a complete interconnect solution from a single source with parts available either from stock or on short lead time.
19th June 2007


Independent universal SMT contact from ITT Electronic Components replaces traditional interfaces

Independent universal SMT contact from ITT Electronic Components replaces traditional interfaces
The new series of Universal Contacts, recently released by ITT Electronic Components, is an independent range of SMT contacts, providing an electrical connection between a device and a PCB. Manufactured as a single piece stamped product, incorporating pre-load and anti-lift features, new Universal Contacts have been designed to replace traditional interfaces where the contact is custom designed into the component.
18th June 2007

3mm signal/power connector is capable of carrying currents of up to 5A

3mm signal/power connector is capable of carrying currents of up to 5A
Newly available from connector and component manufacturer GTK is a series of 3mm pitch connectors designed for high current/high density applications which require the design flexibility of wire-to-wire and wire-to-board configurations. Capable of carrying currents of up to 5A max and with a 10mΩ contact resistance, the new MPC series connectors are suitable for both power and signal applications.
12th June 2007

Interconnect solutions for high-speed LVDS and VESA applications

Interconnect solutions for high-speed LVDS and VESA applications
JAE Europe has announced a family of connectors and pre-configured flat-flex cable assemblies for high-speed signal standards including LVDS. The FI-R/JF-04 family includes special features for optimal impedance matching, error-free assembly in high-volume applications, and extra reliability in the field. The FI-R series connectors are 0.5mm-pitch, delivering a compact solution in 21-way, 31-way, 41-way or 51-way configurations. Available configurations include right-angle or straight connectors and crimp-type or soldered cable attachment. By also meeting VESA standards, the new connectors are able to support future converged digital display connections.
12th June 2007

Industrial cabinet outlet speeds installation of Ethernet cabling

Industrial cabinet outlet speeds installation of Ethernet cabling
HARTING has introduced an industrial cabinet outlet that is designed to speed the installation of industrial Ethernet cabling. Featuring a compact form-factor, the module is especially suitable for space-saving assembly in switch cabinets or other items of network distribution equipment. The new unit incorporates two fully screened Category 6 RJ45 outlets, which can be connected via patch cables to active components, other nodes or end-user devices. All industrial Ethernet protocols in use are supported, whether they operate at 10 Mbit/s, 100 Mbit/s or Gigabit speeds.
7th June 2007

M8 / M12 sensor connector system provides compact, reliable connection

M8 / M12 sensor connector system provides compact, reliable connection
The M8 / M12 connector system from Tyco Electronics provides reliable connection to sensors and related products in the key industrial machinery and factory automation markets. An established connection standard, M8 / M12 connectors also find growing application outside of these industries where a compact connection system with environmental protection is required. The Tyco Electronics range of M8 / M12 products comprises the most popular variants of this connector family enabling versatile systems to be quickly and easily established.
4th June 2007

CAD Models Speed Custom Interconnect Design

CAD Models  Speed Custom Interconnect Design
Omnetics, the leading manufacturer of miniature high rel connectors, has announced that 3D CAD files of its interconnect components are downloadable from its website www.omnetics.com, enabling designers to quickly and simply develop custom interconnect solutions based on the company’s ultra-reliable miniature connector technology.
26th May 2007

Harwin supplies custom PCB connection for unusual applications

Harwin supplies custom PCB connection for unusual applications
Manufacturers who find they have problems connecting to a PCB will be interested in a service from high performance interconnect maker, Harwin. The Portsmouth-based company now enables customers who can’t find a pin header to suit from its wide range, to specify a device customised to their own needs.
23rd May 2007


Cables/Connecting documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
HETT 2019
1st October 2019
United Kingdom EXCEL, London
World Summit AI 2019
9th October 2019
Netherlands Taets Park, Amsterdam
New Scientist Live 2019
10th October 2019
United Kingdom ExCeL, London
GIANT Health Event 2019
15th October 2019
United Kingdom Chelsea Football Club Stadium, London