Enclosures
Cooling Power Electronics
Modern electronic devices, such as inverters and soft starters, need to be protected by an enclosure that is of compact dimensions and has an efficient cooling system. In normal environments the preferred option is to fan ventilate, but fans alone can be detrimental to the ingress protection (IP) classification of the enclosure. The solution lies in a combined fan and filter, designed to provide cooling air that is free of both dust and splashed ...
New Range 19 cabinets with innovative developments
CamdenBoss has launched the second generation of its LOGIC² range of 19inch cabinets boasting a host of innovative features while maintaining the LOGIC flatpacked, quickassembly approach that has proved so successful.
Dual Face Sloping-Front Enclosures Range Extended
OKW have extended the ‘UNITEC’ range of sloping front enclosures with the new size ‘S’ series which is available in 12 different models. These highly attractive enclosures have dual operating faces for face-to-face applications, for example a doctor with a patient, or a sales person with a customer.
EMKA IP65 swinghandle provides double mode security
The EMKA IP65 three-digit combination lock and cylinder key swinghandle system offers simple security on two levels. Applications for the 1155 Program include storage lockers in factories, schools and colleges as well as outdoor storage facilities and standard electrical cabinets.
STOMP die-cast aluminium enclosures used by electric guitarists everywhere
Hammond Electronics’ 1590 STOMP die-cast aluminium enclosures are the housings of choice for leading stomp box manufacturers. Stomp boxes, also known as guitar effect pedals, are, as the name suggests, foot-operated equipment used by electric guitarists to produce preset effects such as distortion, wah-wah, delay, chorus and phaser. Many players will have a bank of up to 20 stomp boxes, each providing a different effect.
Electronics Cooling with a difference
Designed for use in MicroTCA applications, the new Compact Cooling Package (CCP) from Rittal has the flexibility and scalability to provide targeted cooling in many rack mounted applications where significant amounts of heat are being generated. Each CCP is capable of removing up to 1200W of heat in an efficient, controlled manner and multiple systems may be distributed within the rack if required.
Rittal rain canopy enhances outdoor enclosures use
Although most of Rittal’s AE Compact Enclosure range is rated to IP66, they were not designed to be used as outdoor enclosures. The introduction of stainless steel models improved the protection against moisture and air-borne contaminants which made the enclosures particularly suitable for a wide variety of process control applications.
Versatile subracks can be configured for CompactPCI or VME64x applications
The europacPRO family of subracks from electronics packaging specialist Schroff are designed to serve as versatile general-purpose enclosures for 19in. equipment and can also be configured for specific bus-based systems such as CompactPCI and VME64x.
Rittal Ri4Power switch-disconnector-fuse sections
The construction of Rittal Ri4Power switch-disconnector-fuse section is based on Rittal’s Ri4Power well-known components. In the highest design version, an internal separation to installation Form 4b is achieved with complete side panel modules and bar covers. Depending on the number of cables to be connected, the new Rittal fused isolator sections can be provided in widths of 1000 and 1200 mm and offer connection spaces of approx. 300 or 500 m...
FDB make hinging simpler
This new concealed hinge from FDB Panel Fittings is ideal for nested doors such as 19” cabinets and wall mounted racks. It is also suitable for quick access side panels on stand-alone cabinets. The space saving design enables a simple clip-in fitting at both the top and bottom of the door with “no tools”, while a manually operated sprung pin allows for easy and quick installation/removal. Ingenious simplicity of this hinge assembly ensures ...