BGA pitch 0,200 mm

23rd August 2010
Posted By : ES Admin
BGA pitch 0,200 mm
Somacis plant in Castelfidardo is very close to finish the tests that will break another barrier. The Italian headquarters are producing a test board that will use a BGA with a pitch of 0,2 mm. Something unbelievable till few years ago is very close to become a new starting point to further challenges. Key characteristics are very demanding for PCB, with BGA Pad diameter of 100 µm and tracks and gaps of 30 µm.
The main problem is linked to the huge amount of connections that should be routed. There is a very dense ball matrix and using a single traces escape routing, only 2 rows per layer can be connected. Totally 9 sequential layers are needed to connect all the pads. A good challenge, there’s no doubt about it. In attachment few images of measurement made on pitch X and Y and on the hole diameters of BGA.

You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Sensor+Test 2019
25th June 2019
Germany Nürnberg Messe
DSEI 2019
10th September 2019
United Kingdom EXCEL, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
Engineering Design Show 2019
16th October 2019
United Kingdom Ricoh Arena, Coventry
ELIV 2019
16th October 2019
Germany Bonn World Conference Center