HuMANDATA Launches Altera Cyclone IV USB-FPGA Board

9th May 2012

HuMANDATA LTD.

ES Admin

0 0

HuMANDATA LTD. today released EDA-301 of USB-FPGA board powered by Altera Corp.'s Cyclone IV E FPGA (EP4CE15F17C8N). HuMANDATA's EDA-301 is equipped with Altera high-spec Cyclone IV E FPGA on acompact, 53 x 54mm PCB. A configuration device, on-board oscillators, user switches and LEDs are mounted as minimum components of FPGA design and development.

EDA-301 operates with 5.0 V external input or USB bus power. The EDA-301 provides 56 userI/Os, which are divided into two I/O banks. FTDI's FT2232H (Dual channel USB controller IC) is equipped. One channel is available for a user communication interface. The other channel is configured as an I/F for FPGA configuration and configuration device access.

No download cable is needed with original configuration tool BBC [EDA-301].

HuMANDATA's ACM/XCM series boards are designed on same PCB size and connector layout. So it is easy to swap the board to another one, and you can quicklytry a new FPGA/CPLD.

HuMANDATA's EDA-301 is compliant with the RoHS Directive, and is designed for lead-free soldering.

Specifications:

- Altera Cyclone IV E (EP4CE15F17C8N)

- Configuration Device(Altera, EPCS16SI8N)

- USB controlIC (FTDI, FT2232H)

-- FPGA Configuration

-- Configuration device access (Write/Reset/Erase)

-- User communication I/F

-- Free original configuration Tool BBC [EDA-301]

- 50MHz Oscillator (50 ppm) or External inputs

- User Switch (Push x1,DIPx1bit)

- User LED x4

- Seven segment LED module x1

- Status LED (Power, Done)

- Power-on Reset

- JTAG Connector(10 pin socket) for download cable connection

- JTAG buffer for stable download or debug

- 5.0 V single power supply operation(External input or USB Bus power)

- High quality six layers PCB (Immersion gold)

- Compact size 2.087 x 2.126 (53 x 54 mm)

- ESD and Surge protection component for USB I/F

- Tested all I/O

- RoHS compliance

- Made in Japan