Win a Microchip ATmega328PB Development Suite Bundle

1st December 2017
Posted By : Lanna Cooper
Win a Microchip ATmega328PB Development Suite Bundle

 

Win a Microchip ATmega328PB Development Suite Bundle. The ATmega328PB is a low power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATmega328PB achieves throughputs close to 1MIPS per MHz.

The ATmega328PB is supported with a full suite of programme and system development tools and this bundle includes an ATmega328PB Xplained Mini evaluation kit, an ATATMEL-ICE development tool and an ATPOWERDEBUGGER Power Debugger kit.

The ATmega328PB Xplained Mini (ATMEGA328PB-XMINI) evaluation kit is a hardware platform for evaluating the ATmega328PB microcontroller. It comes with a fully integrated debugger that provides seamless integration with Atmel Studio. The kit provides access to the features of the ATmega328PB MCU enabling easy integration of the device into a custom design. The kit features two capacitive buttons for easy evaluation of the integrated QTouch Peripheral Touch Controller (PTC).

The Atmel-ICE (ATATMEL-ICE) is a development tool for debugging and programming ARM Cortex-M based SAM and AVR microcontrollers with on-chip debug capability. It offers programming and on-chip debugging of all AVR 32-bit MCUs on both JTAG and aWire interfaces, programming and on-chip debugging of all AVR XMEGA family devices on both JTAG and PDI 2-wire interfaces, JTAG and SPI programming and debugging of all AVR 8-bit MCUs with OCD support on either JTAG or debugWIRE interfaces, programming and debugging of all SAM ARM Cortex-M based MCUs on both SWD and JTAG interfaces and programming of all tinyAVR 8-bit MCUs with support for the TPI interface.

The Power Debugger kit (ATPOWERDEBUGGER) is a tool for debugging and programming AVR microcontrollers using UPDI, JTAG, PDI, debugWIRE, aWire, TPI or SPI target interfaces and ARM Cortex-M based SAM microcontrollers using JTAG or SWD target interfaces.

In addition, the Power Debugger has two independent current sensing channels for measuring and optimising the power consumption of a design. It also includes a CDC virtual COM port interface as well as Data Gateway Interface channels for streaming application data to the host computer from a SPI, USART, TWI or GPIO source.

The Power Debugger is a CMSIS-DAP compatible debugger which works with Studio 7.0 or later, or other frontend software capable of connecting to a generic CMSIS-DAP unit. It streams power measurements and application debug data to Data Visualiser for real time analysis.

For your chance to win this Microchip ATmega328PB Development Suite Bundle, click here and enter your details in the online entry form.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

CES 2018
9th January 2018
United States of America Las Vegas, Nevada
Developing wearable products: technology and opportunities
17th January 2018
United Kingdom Cocoon Networks, London
Smart Mobility Executive Forum
12th February 2018
Germany Berlin
embedded world 2018
27th February 2018
Germany Nuremberg
Industry 4.0 Summit 2018
28th February 2018
United Kingdom Manchester