Test & Measurement

EuMW2014:Power sensors span -70dBm to +26dBm dynamic range

8th October 2014
Mick Elliott
0

Keysight Technologies’ U2040 X-Series wide dynamic range power sensors made their debut at European Microwave Week. The series consists of four USB models for wireless and radar applications, and a dedicated LAN model for satellite testing. The 96 dB dynamic range, spanning -70 dBm to +26 dBm, enables accurate power measurements of very small signals, critical for applications such as wireless chipset and power amplifier module manufacturing.

With the new average mode time selectivity feature, users are able to make both average and time selectivity average power measurements across the full 96 dB dynamic range. This is a significant improvement when compared to conventional power sensors, which often limit time-gated dynamic range measurements at around 50 dB.

With a measurement speed of up to 10,000 readings per second in fast/buffer mode, the power sensors measure continuously in real time and keep pace with very fast pulses, up to 10 kHz pulse repetition frequency (PRF).

While conventional sensors only provide a snapshot of continuous pulses, leaving dead time where glitches can slip by unnoticed, U2040 X-Series sensors measure every continuous pulse without leaving time gaps in between measurement acquisitions.

The U2040 X-Series provides broadband coverage for any modulated signal, and covers all common wireless signal formats such as LTE, LTE-Advanced with 100 MHz bandwidth, and WLAN 802.11ac with 80/160 MHz bandwidth. Built-in radar and wireless presets allow faster test set up, and for data capture and analysis, engineers can use the Keysight BenchVue software, which is bundled free of charge with each sensor.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier