Power

Thyristor controlled transformer rectifiers enable outputs up to 750kVA

26th February 2016
Jordan Mulcare
0

Powerstax announces the introduction its Drake TR Series of Industrial Thyristor Controlled Transformer Rectifiers. Available with outputs up to 750kVA this range of Transformer Rectifiers uses analogue or digitally controlled thyristors to achieve the required voltage and current profile with switched-mode technology available for smaller systems.

Standard TR Series systems meet IP54 and they can be air, oil or water cooled and sealed to IP65 using purge and pressure techniques for ATEX Zone 1 and 2 areas.

Typical applications for the Drake TR series include water treatment, electrochlorination, surface finishing, cathodic protection and anti-fouling, electrophoretic processes, aircraft ground support, marine and offshore and engine starting.

Key design features include thyristor control, 415VAC 3-Phase input, <1% output stability, <5% output ripple, Short circuit protection, Integral fan cooling, Remote control and monitoring options, top or bottom cable entry options, analogue or digital voltage and  current display. Operational safety is ensured by a door isolator, input main contactor and emergency stop push button. Status indicators show supply-on, DC-Live and rectifier fault and overload is protected by input thermal overload contactor and self-limiting electronic current control backed-up with high speed semiconductor fuses.

Standard products are available over the range 15V at 1500A, 30V at 2000A, 60V at 3000A, 75V at 1000A, 150V at 1200A and 400V at 500A. Output voltage can be adjusted from 0V to full voltage when in voltage control mode and output current can be adjusted from 0A to full current when in current control mode. Remote control may be specified as an option using isolated input signals from a remote computer source and isolated signal transformers can be fitted to provide remote feedback of output current and voltage.

Tim Worley, CEO, Powerstax, comments. ”We are pleased to announce this new standard range of Industrial Thyristor Controlled Transformer Rectifiers and these provide stand-alone power solutions for a wide range of industrial systems.”

Now owned by Powerstax, one of Europe’s leading value-added power solutions manufacturers, the Essex based company continues to supply high-reliability industrial power systems which meet the many challenges system designers face. Drake products are designed to meet harsh environmental conditions and high reliability is central to all Drake designs to ensure continuous operation and minimise disruptive and costly down-time.

Powerstax manufactures Drake transformer rectifiers with output currents to 5,000A and output power up to 1000kVA and beyond. Solutions are available for harsh (marine, offshore, desert) and hazardous (Zone 1 and Zone 2) environments and can be oil, air or water cooled and can be sealed up to IP65 if the environment dictates with purge and pressure systems and heat exchangers incorporated if required.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier