1kW Convection cooled AC/DC power supply with PFC-Input & inherent redundancy designed for rugged industrial applications.

19th September 2011
News Release from: Absopulse Electronics Ltd.
Written by : ES Admin
1kW Convection cooled AC/DC power supply with PFC-Input & inherent redundancy designed for rugged industrial applications.
Absopulse Electronics’ PFL 1K-XXF44T series of rugged industrial grade ac/dc switching power supplies with PFC input deliver up to 1000W continuous output power. They employ field-proven design topology to convert a universal ac-input voltage to a 24Vdc/40A, 48Vdc/20A or 125Vdc/8A output.
The series is built with two PFC 319 internal modules, which have a well-established track record in numerous heavy-duty applications. This modular construction provides inherent redundancy; in the event of the failure of one internal module, the unit would remain functional at half power. Several PFL 1K units can be paralleled for higher output power. This design can also be used as a 500W redundant power supply. Indicators include a green “Output ON” LED that is visible on each internal module through the cooling slots. An output fail alarm is available as an option.

The PFL 1K-XXF44T series are housed in a rugged low-profile convection cooled chassis with a total footprint of 267 x 64 x 353mm and are suitable for 1kW industrial applications where available height is restricted and where fans are not permissible.

These units are filtered to meet EN55022 EMI standards. The power factor is corrected to a minimum of 0.97 at full load for the entire input range in compliance with the EN6100-3-2 directive for low input harmonic distortion. The absence of fans, low component count, large design headroom, and the use of components with established reliability result in a high MTBF.


Available downloads


You must be logged in to comment

Write a comment

No comments




Network Headlines

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

 

WEBENCH® Designer