50mA Linear Regulator from Linear Technology withstands 80V Input

Posted By : ES Admin
50mA Linear Regulator from Linear Technology withstands 80V Input
Linear Technology has announced the LT3011, a high voltage micropower, low dropout regulator that delivers up to 50mA of continuous output current with a low dropout voltage of only 300mV at full load. The LT3011 features an input voltage range of 3V to 80V, delivering output voltages as low as 1.24V and up to 60V.
The device’s PowerGood flag indicates output regulation. However, a single capacitor may be used to program the delay between this regulated output level and the flag indication. The 80V input voltage capability makes it ideal for automotive applications, 48V telecom backup supplies and industrial control applications. Low quiescent current of 46uA (operating) and 1uA (in shutdown) make it an excellent choice for battery-powered keep alive systems that require optimum run time.

Output noise is minimized at only 100uVRMS over a 10Hz to 100kHz bandwidth, making the LT3011 ideal for noise-sensitive applications. For high voltage applications that require large input-to-output voltage differentials, the LT3011 provides a very compact solution. Its thermally enhanced MSOP and DFN packages offer thermal resistance equivalent to much larger conventional packages.

The LT3011 is able to operate with very small, low cost, ceramic output capacitors. It is stable with only a 1uF output capacitor while older linear regulators require between 10uF and 100uF to maintain stability. These tiny external capacitors can be used without the necessary addition of series resistance (ESR) as is common with many other regulators. Internal protection circuitry includes reverse-battery protection, current limiting, thermal limiting, and no reverse current flow from output to input.

The LT3011E and LT3011I are available from stock in a proprietary 12-lead thermally enhanced MSOP package and a 10-lead 3mm x 3mm DFN package, both with operating junction temperature of -40°C to +125°C. The LT3011H is available in the MSOP package only and is rated up to +150°C operating junction temperature.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

SENSOR+TEST 2017
30th May 2017
Germany Nuremberg
Future Surface Fleet 2017
6th June 2017
United Kingdom Portsmouth
Electronic Warfare Europe 2017
6th June 2017
United Kingdom Olympia, London
Automechanika Birmingham 2017
6th June 2017
United Kingdom NEC, Birmingham
Close Air Support 2017
7th June 2017
United Kingdom London