DC/DC converters provide 94% efficiency

The module is specified to operate over a Vin range of 7.5-14V and provides a user-adjustable Vout in the range of 0.6-1.8VDC with what it claims to be industry leading efficiency of 94%. The OKDx-T/90 is available in three different package configurations:

1. SIP measuring 50.8x9.51x19.05mm (2.0x0.37x0.75")
2. Horizontal mounting TH (Through-Hole)
3. SMT versions measuring 50.8x19.05x10mm (2.0x0.75x0.39")

The OKDx-T/90 is useful for space-constrained embedded applications where performance is critical to the application. Critical performance parameters are fully accessible through the PMBus via the Murata Power Designer GUI software. The OKDx-T/90-W12 series converters are delivered with a default firmware configuration suitable for a wide operating range in terms of input voltage, output voltage and loading conditions. The OKDx-T/90 operates over a Vin range from 7.5-14V, Vout can be adjusted from 0.6-1.8V, with a typical efficiency of 94% with 12Vin, at 1.8Vout and 50% load.

The converter’s proprietary digital control power management functions include a range of advanced performance-enhancing features. Its non-linear transient response greatly improves the dynamic response time, reducing Vout deviation due to large load changes; phase spreading reduces input capacitor requirements and efficiency losses. The synchronisation feature eliminates beat frequency reflection, resulting in less EMI filtering, and digital current sharing ensures near 100% current sharing accuracy with up to four modules operating in parallel.

The converters provide Dynamic Loop Compensation, where the feedback loop parameters are automatically calculated and configured depending on the application-specific operating conditions. Additional standard features include output short circuit, over current, over voltage, over temperature, and input under voltage protection. Voltage margining, tracking, power good, remote sense, and remote on/off are also features commonly used in advanced power architectures.

All of the OKDx-T/90-W12’s standard and advanced features can be configured via the Murata Power Designer software (GUI), which includes a high-precision simulation tool.

The converters are suitable for any application requiring high current processor power, particularly in areas such as networking, computing/servers, telecom, powering FPGAs, CPUs, programmable logic, mixed voltage systems, advanced computing and all distributed power applications.