Power

Compact 1 & 2W converters target medical applications

8th July 2016
Nat Bowers
0
Datasheets

Providing a 1500VAC input/output isolation at a 250VAC working voltage to facilitate a 1 x MOPP, XP Power has announced the IMM series of 1 and 2W DC/DC converters. The IMM01 1W and the IMM02 2W single and dual output converters are approved to the international medical safety standards ANSI/AMII ES60601-1, CSA 22.2 No 60601-1 and EN/IEC60601-1.

The IMM01 and IMM02 are available with a choice of two 2:1 input voltage ranges based around a nominal 5VDC (4.5-9.0VDC) and 12VDC (9.0-18.0 VDC) inputs. Single output models provide the popular nominal outputs of +3.3, +5, +12 or +15VDC. Duals provide the combinations of ±3.3, ±5, ±12 or ±15VDC.

Packaged in industry standard SIP-7 or SIP-8 formats the units occupy very little PCB. The IMM01 uses a SIP7 footprint and measures 19.50x10.60x9.20mm. The SIP8 2W IMM02 is 21.85x10.60x9.20mm. Capable of operating in most environments over the extended operating temperature range from -20 to +100°C, the convection cooled units can deliver full power up to +60°C.

A remote On/Off input pin allows external control of the converter operation from a host application such as to sequence startup.

The IMM series is available from Farnell, element14, Digi-Key, approved regional distributors, or direct from XP Power and come with a three year warranty.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier