12 Pulse Gate Firing Board For SCR Control Of High Power 100mm Thyristor Applications

10th April 2013
Written by : ES Admin
12 Pulse Gate Firing Board For SCR Control Of High Power 100mm Thyristor Applications
Applied Power Systems is proud to announce the release of their BAP3012 next generation twelve pulse gate firing board which provides robust and reliable operation of parallel or series connected Silicon Controlled Rectifier bridges for high power phase-control and power conversion applications using up to 100mm devices.
The BAP3012 controls 2 six pulse SCR bridges which can be operated in parallel or series mode with advanced circuitry to provide high accuracy bridge currents to within +/-2% while reducing output ripple and input harmonics.

The BAP3012 provides hard DC gate firing, suitable for firing large area devices. The BAP3012 provides remote control of the Phase Delay Angle to control the output voltage, variable current limiting, remote on/off and options for soft start / stop functions.

The BAP 3012 operates with voltages up to 600VAC. Standard features include over temperature protection; phase loss inhibit; on-board led indicators; 5V and 15V outputs for customer control circuits; and fault signals.

The BAP3012 is in full production and available for immediate engineering evaluation. Production lead time is 2-6 weeks with a cost of $500 in OEM quantities.

Available downloads


You must be logged in to comment

Write a comment

No comments




Network Headlines

The source for EOL devices

Signup up to view our publications

Sign up

Signup up to view our downloads

Sign up

 

WEBENCH® Designer