Power

150W Rugged, Industrial Quality, Universal Input Battery Charger with PFC-input.

9th July 2010
ES Admin
0
Absopulse Electronics’ BCP 150 Series is a rugged, industrial quality battery charger. It provides 150W total power for the output and for float charging the external battery. Standard single output float voltage options include 13.8Vdc, 27.6Vdc or 55.2Vdc. The unit accepts a 95-264Vac universal input (47-63Hz) with power factor correction to meet EN61000-3-2. Custom input and output options are available on request.
The BCP 150 has a low battery disconnect circuit to prevent damage to the battery by low discharge during prolonged AC failure. The battery input is also protected against accidental reverse battery connection by a crossbar diode and internal safety fuse. It has an AC/Charger Fail Alarm to indicate either failure of the charger circuit or loss of AC input power. A charger ‘ON’ LED indicator is located beside the terminal block.

Cooling is via baseplate to a heatsinking surface and by natural convection, and the unit is rated for operation over a 0 oC to +50oC cold plate temperature for full specification. An extended temperature range is available on request. The charger is ruggedized to meet IEC61373 Cat 1 A&B requirements as a minimum, with heavy ruggedizing and conformal coating available for operation in extreme environments. It is fully protected and meets EN 60950-1 and related standards. Low component count, large design headroom, and the use of components with established reliability result in a high MTBF.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier