Power
Introduction to the Battery Management Studio
Battery Management Studio (bqStudio) is the standard tool to interface with all battery management gauges highlighting the setup, software, configuring and generating logs and golden files.
The power module for industrial motor control
ST offers new ACEPACK 1 and ACEPACK 2 Power Modules with Six-pack and CIB (converter + inverter + brake) topologies in industrial power applications including industrial motor drives, solar panels, welding tools and power management solutions.
Small form factor i.MX7 System-On-Module meets customer demands
e-con Systems has announced the release of its eSOMiMX7 System on Module. It is based on NXP/Freescale i.MX7 processor. To cater to the customer's demand of a small SOM for building IoT Applications, Industrial HMI, Test and Measurement, Industrial HMI, eBook Reader and Wearables, eSOMiMX7 is launched with a small form factor of 55x30mm.
Extra-wide input DC/DC converters for railway industry
Powerbox has announced the launch of four series of extra-wide input voltage range, 8W to 20W board-mounted DC/DC converters for railway and transportation industry. With a 13:1 input voltage range of 12V to 160V, the MAD33 (8W), MAD32 (10W), MAE35 (15W) and MAF35 (20W) have been developed to provide systems designers with a single part number that is able to power a large range of transportation industry applications, reducing inventory, ti...
Adaptive power supply offers variety of output voltages
Globtek can provide up to seven USB PD2.0/3.0 output power profiles for its GTM96605 USB adaptive power products. Six of the USB PD2.0/3.0 power profiles are normally provided as follows: 5V/4.6A, 5.8V/4.6A, 9V/4.4A, 12V/4A, 15V/3.6A and 20V/3A.
Wireless power receiver slims down to charge smartcards
Powercast has slimmed down the design of its Powerharvester wireless power receiver to 0.3mm, making it suitable to charge compact devices, like smartcards, over-the-air, without interrupting service.
Battery solution converts lighting fixtures to emergency lighting
Manufacturer of LED lighting solutions, Bri-Tek Technologies has launched an emergency battery solution that can convert any lighting fixture to emergency lighting.
Switching power supply delivers 225W with fan cooling
The OF(M)225 Series of open frame switching power supplies from Gresham Power Electronics utilises a highly advanced circuit topology to deliver 225W with fan cooling and 120W convection cooled in an industry standard package that has a 2.00 x 4.00in. footprint while being just 1.0in. high (50.8 x 101.6 x 25.4mm).
Single channel gate driver ICs provide a 300 mil wide body package
Infineon Technologies is now offering the EiceDRIVER 1EDC Compact 300mm family of single channel gate driver ICs. With an insulation test voltage of V ISO = 2500 V(rms) for 60 sec these galvanically isolated drivers are recognised under UL 1577. Due to their high switching frequency of up to 1,000kHz they do not only drive IGBTs, but can also be integrated in demanding SiC MOSFET topologies.
Class D speaker amplifiers deliver the highest efficiency
With the MAX98357 and MAX98358 digital-input Class D audio power amplifiers by Maxim Integrated Products, Inc., designers can achieve highest efficiency in a compact, cost-efficient plug-and-play solution. Despite their ultra-small form factors, these Class D efficient amplifiers deliver 3.2W of Class AB audio performance for audio quality and are suitable for a wide variety of applications.