Power

3.5/5kW 3-phase AC/DC power supply targets data centres

28th April 2016
Nat Bowers
0

Murata Power Solutions has announced a highly efficient, 3.5/5kW, three-phase power converter for 230/480VAC systems. The D2U5T-H3-5000-380-HU3C operates from utility-grade, three-phase AC power to deliver 5kW of reliable power to 380V distributed power systems, HVDC data centres and other industrial applications.

The power supply is provided with droop sharing to provide N+1 redundancy of supply to the application. Up to three supplies may be operated in parallel for a total system power of 15kW.

The D2U5T power supply uses a Vienna rectifier topology to allow true three-wire input without the need for a neutral connection. Its use of digital controls allows a linear efficiency curve, with efficiency greater than 95% at 50% load. The unit accommodates input voltages in the range 180- 264VAC for 3.5kW operation and 320-525VAC for 5kW output.

Packaged in an industry standard 2U format and delivering a 23.1kW per cubic inch power density, the D2U5T is designed for use in broadcast, industrial and large data centre applications where high power conversion efficiency is vital.

The D2U5T is hot pluggable and provides a number of features including over-voltage, over-current and over-temperature protection. LEDs give an indication of power supply status and any fault conditions occurring in the input, output or power conversion stages of the unit. Control and monitoring of the unit is also possible using the standard PMBus protocol via an I2C interface.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier