Mixed Signal/Analog

Displaying 731 - 740 of 755

Hi-Speed Multi-Media Switch Integrates USB and Audio Switching Capability

 Hi-Speed Multi-Media Switch Integrates USB and Audio Switching Capability
Fairchild Semiconductor’s highly integrated multi-media switches offer an industry-leading combination of features, performance and packaging for a range of portable applications. The new devices integrate both USB and negative swing (low-distortion) audio switching functionality into a single package. This integration enables portable applications to handle either USB or audio signals via one connector and helps designers eliminate the need for additional components.
30th October 2006

Multiplexers transmit quality audio video and high-speed USB

Multiplexers transmit quality audio video and high-speed USB
Intersil has introduced a family of dual 2:1 multiplexers that enable the transmission of quality audio, video, and high-speed USB data through a single input/output port, eliminating up to two ports on each portable device.
25th October 2006

Triple Video Amp with Integrated Filters and HV Sync Capability

 Triple Video Amp with Integrated Filters and HV Sync Capability
Texas Instruments has introduced the first video amplifier with integrated filters that is capable of handling both analog RGB signals and digital horizontal and vertical (HV) sync signals on a single chip. The new device saves up to 80 percent board space when compared to traditional amplifier solutions for video projectors, professional video, broadcast video, computer display, traditional and digital TV systems. In addition, designers benefit from improved performance and maximum flexibility via I2C programmability of all functions.
24th October 2006


ADI's precision battery monitor family prolongs automotive battery life

 ADI's precision battery monitor family prolongs automotive battery life
Analog Devices has announced its ADuC703x family of highly integrated, precision battery monitors. With the increasing volume of electronic content in today’s cars, coupled with the fact that 60 percent of all automotive electronics failures can be attributed to faulty or discharged batteries (according to The Allgemeiner Deutscher Automobil-Club), there is a growing need to continuously monitor battery capacity and intelligently manage power distribution in the automobile’s electrical system. Based on the company’s precision analogue microcontroller technology, the ADuC703x family precisely measures battery voltage, current and temperature, and uses these variables to determine the battery’s state-of-charge (SOC) and state-of-health (SOH).
17th October 2006

Clock IC provides all critical timing functions on one chip

 Clock IC provides all critical timing functions on one chip
Analog Devices is introducing what it says is the the industry’s first clock IC to combine low phase noise clock generation with 14-channel clock distribution at jitter levels below 1 picosecond. The AD9516 series integrates an integer-N synthesizer, two reference inputs, a voltage-controlled oscillator (VCO), programmable dividers, adjustable delay lines and 14 clock drivers, including LVPECL, LVDS and CMOS.
17th October 2006

Hall-effect sensor ICs for battery-powered applications

 Hall-effect sensor ICs for battery-powered applications
The new A1391 and A1392 linear Hall-effect sensor ICs from Allegro MicroSystems Europe are micropower devices that feature a power consumption of only 10 mW in active mode. Despite the low power consumption, the features required to produce a highly accurate linear Hall effect IC have not been compromised.
15th October 2006

ST's 3-Axis Accelerometers feature small form factor and low power consumption

STMicroelectronics has introduced the first two devices in its new family of low-g linear accelerometers, distinguished by small form factor and low power consumption. The feature-rich LIS302 sensors meet the growing demand for smart functionality, such as hard-disk drive protection and motion-controlled operation, in today ’s mobile phones, digital audio players, and laptops.
6th October 2006

Quad-channel Parametric Measurement Unit

 Quad-channel Parametric Measurement Unit
Analog Devices is introducing the industry’s first quad-channel PMU (parametric measurement unit). The AD5522 combines four independent channels in a space-saving 12 mm × 12 mm TQFP package. Each of the four channels includes on-chip sense resistors for 5 microamp, 20 microamp, 200 microamp and 2 milliamp current ranges.
5th October 2006

ADC is designed to increase the portability of patient and industrial monitors

 ADC is designed to increase the portability of patient and industrial monitors
Analog Devices' latest precision PulSAR ADC is designed to increase the portability of patient and industrial monitors and improve the performance and throughput of automated test equipment and data acquisition systems, Analog Devices' AD7980 1-MSPS (mega-sample per second) 16-bit ADC consumes 80 percent less power and board space than the closest competing 16-bit ADC in its class.
2nd October 2006

14-bit high-speed octal ADC will save space and power in portable medical products

14-bit  high-speed octal ADC will save space and power in portable medical products
Analog Devices' latest family of octal ADCs are ideal for portable medical devices and ultrasound machines where lower power consumption and smaller board space are critical design considerations. The 10-bit AD9212 and 12-bit AD9222 consume less than 100 mW per channel, yielding savings of as much as 5 to 6W when compared to competitive offerings in ultrasound systems containing up to 512 channels.
8th September 2006


Mixed Signal/Analog documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

POWER & ENERGY 2017
22nd November 2017
Rwanda Kigali
SPS IPC Drives 2017
28th November 2017
Germany Nuremberg
Cyber Security - Oil, Gas, Power 2017
29th November 2017
United Kingdom London
AI Tech World
29th November 2017
United Kingdom Olymipa, London
Maker Faire 2017
1st December 2017
Italy Rome