Memory technology uses electric current to read and write data

Posted By : Enaie Azambuja
Memory technology uses electric current to read and write data

Today's computers often use as many as four different kinds of memory technology, from the hard drive to the memory chips, each with its own strengths and weaknesses. A new memory technology may be poised to disrupt this landscape, however, with a unique combination of features. It goes by the unwieldy acronym STT-MRAM, which stands for spin-transfer torque magnetic random access memory.

"All other memory technologies are good at some things and not so good at others. People are hoping that STT-MRAM can be good at everything," said electrical engineer Holger Schmidt, the Kapany Professor of Optoelectronics at UC Santa Cruz.

As one of 15 partners in the Samsung Global MRAM Innovation program, Schmidt's lab is collaborating with Samsung researchers to help develop this emerging memory technology. With his expertise in optoelectronics, Schmidt is using optical techniques based on ultra-short laser pulses to study preproduction prototype devices from Samsung. His assessments are helping the company optimise their materials and fabrication processes.

STT-MRAM stores information in the magnetic states of tiny magnetic elements or "nanomagnets" less than 100 nanometers across. Unlike other magnetic storage technologies, such as hard drives with their spinning disks and magnetic read-write heads, STT-MRAM devices have no moving parts because they use electric current to read and write data.

Although current implementations still have plenty of room for improvement, the technology offers the potential for high-speed, high-density, energy-efficient memory that is nonvolatile, meaning stored information is not lost when the power is cut off.

Several key advances in physics and materials science over the past 20 years have led to the development of STT-MRAM and other so-called spintronic technologies. While electronic devices are based on the movement of electrical charges, spintronics exploits another property of electrons called spin.

Spin is one of those bizarre concepts of quantum mechanics without a direct equivalent in our macroscopic world. Suffice it to say that electrons behave as if they were spinning, producing a small magnetic moment (like a tiny bar magnet with north and south poles) that can interact with other electrons and atoms in a material.

The nanomagnets in an STT-MRAM device, called spin valves or magnetic tunnel junctions, have two magnetic layers separated by a thin barrier through which electric current can flow.

When the spins in the two magnetic layers are aligned, resistance is low, and if the two layers have opposite spins resistance is high, providing two readable and switchable states to represent 0 and 1 in the binary logic of computers.

The ability to switch the state of a spin valve with an electric current was a critical innovation. A polarised current in which the spins of the electrons are aligned can transfer that spin state to one of the magnetic layers as it passes through, a phenomenon called spin-transfer torque (STT).

STT-MRAM chips for niche applications are just beginning to reach the market, and dozens of companies are working to optimise the technology for use in consumer electronics.

According to Schmidt, one of the challenges is to operate the chips with as little power as possible so they don't heat up too much. How much current it takes to switch a nanomagnet depends on damping, or how long it takes to settle down into a new spin state, he explained.

Measuring damping parameters in an array of nanomagnets is extremely challenging, but Schmidt's lab is able to do this using short laser pulses. He and his collaborators, led by graduate student and first author Mike Jaris, reported their latest findings in a paper published in Applied Physics Letters.

"We were able to extract damping measurements from prototype devices and show the effects of the fabrication process on the material properties of the nanomagnets," Schmidt said.

The collaboration with Samsung has been exciting for his lab, he said, giving his students the opportunity to work at the cutting edge of an emerging technology. "It's a completely different type of memory, and I expect to see it used in more applications over the next few years," he said.


You must be logged in to comment

Write a comment

No comments




More from University of California, Santa Cruz

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

EPE 2017 ECCE Europe
11th September 2017
Poland Warsaw
DSEI 2017
12th September 2017
United Kingdom ExCeL, London
RWM 2017
12th September 2017
United Kingdom NEC, Birmingham
Productronica India 2017
14th September 2017
India Pragati Maidan, New Delhi
Industry of Things World 2017
18th September 2017
Germany Berlin Congress Center