Kontron's OM6060 said to lower costs and increases the versatility of MicroTCA platform development

5th May 2010
News Release from: Kontron AG
Written by : ES Admin
Kontron's  OM6060 said to lower costs and increases the versatility of MicroTCA platform development
Kontron announced today the Kontron MicroTCA platform OM6060, a compact and modular development platform that is configured for the design, evaluation, and test of small, compact, and highly integrated multiprocessor systems.
The Kontron MicroTCA platform OM6060 is targeted as a solution for prototypes in test equipment, packet processing, and industrial applications. The chassis is 3U high, 250 mm deep, and 156 mm wide. It contains an AC power supply and fans with airflow from below the AdvancedMC slots. The OM6060 can accommodate up to six mid-size AMCs, one full-size MicroTCA Carrier Hub, and supports multiple PCIe, GbE, and SRIO configurations. Developers benefit from an increased flexibility in MicroTCA platform development, which helps them in finding an ideal solution for specific application needs in a shorter time, thus reducing development efforts, time to market and total cost of ownership.

The Kontron OM6060 supports multiple CPUs and I/O-boards over PCI Express (PCIe) without the need of an extra PCIe fabric switch, helping to reduce system costs. PCIe fabric clocks are generated on the Kontron OM6060 backplane. The compact MicroTCA platform also provides Ethernet connectivity to all AMCs. In such configurations an Ethernet switch is located on the MCH. Depending on the level of Ethernet features required, Kontron offers a low-cost unmanaged MicroTCA Carrier Hub, the Kontron AM4901, or a fully featured MCH with carrier grade switching and management features, the Kontron AM4904.

For packet processing applications, the Kontron OM6060 provides extra direct Ethernet links between AMC slot 1 and four adjacent AMC slots, which can be used by an AMC packet processor, such as the Kontron AM4204 or AM4210. 10GbE fabrics and switches are not required, which reduces system complexity and board count, leading to overall reduced costs. Alternatively, the Kontron OM6060 can be used with high-speed SRIO links in point-to-point configurations between adjacent AMCs.

If Ethernet connectivity is not needed, costs can be reduced by using a MicroTCA Carrier Management Controller module (MCMC-module) on the backplane. The AMC bays are fully compliant with the AMC standards and the MicroTCA standard, so any standard compliant AMC may be used. Customer specific backplanes for OEM series production are available on request.

These multiple configuration options over the backplane make the Kontron MicroTCA platform OM6060 a perfect fit for a wide range of applications.

Available downloads


You must be logged in to comment

Write a comment

No comments




Network Headlines

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

 

WEBENCH® Designer