9939 Via Pasar
San Diego
CA 92126
United States of America
Phone
+001 (858) 621-2700
Fax
+001 (858) 621-2722
Web Address
http://www.zcomm.com
Z Communications Inc Company Details
Ultra Wideband VCO Tunes From 2.7 to 5.4 GHz
The new V600ME31-LF operates from 2700 to 5400 MHz with a tuning voltage range of 0-24 Vdc. This octave tuning VCO features a typical phase noise of -107 dBc/Hz @ 100 kHz offset and an average tuning sensitivity of 140 MHz/V.
Z-Communications Unveil New DRO Series VCOs With Electrical Tuning 8 To 12 GHz
Z-Communications has raised performance standards to new heights through the introduction of the DRO Series of high performance oscillators. DRO oscillators are sure to meet the demands of any Up/Down Converter system requiring an ultra-low phase noise LO solution. The DRO Series of high frequency oscillators use high-Q dielectric resonators and are currently available at 8 to 12 GHz.
Z-Communications Low Noise Dielectric Resonator SMT VCO At 8 GHz
Z-Communications introduce a new high performance voltage controller oscillator, DRO8000A. The new high performance DRO8000A covers 8000 MHz within a tuning voltage range of 0-12 Vdc and is ideal for the test and measurement market.
New DRO Series VCOs with Electrical Tuning 8 to 12 GHz
Z-Communications has raised performance standards to new heights through the introduction of the DRO Series of high performance oscillators. DRO oscillators are sure to meet the demands of any Up/Down Converter system requiring an ultra-low phase noise LO solution. The DRO Series of high frequency oscillators use high-Q dielectric resonators and are currently available at 8 to 12 GHz.
VCO V846ME24-LF Features Linear Tuning
Z-Communications announces a new RoHS compliant VCO model V846ME24-LF in the S-band. The V846ME24-LF operates at 3100 to 3500 MHz with a tuning voltage range of 1 to 12 Vdc and provides better than 1.1:1 tuning linearity.
Z-Communications' Compact USSP1217-LF VCO offers Low Power Consumption
Z-Communications has announced the launch of a new RoHS compliant Voltage Controlled Oscillator - model USSP1217-LF in the L-band. The USSP1217-LF operates at 1210 to 1230 MHz with a tuning voltage range of 0.5 to 3.0 Vdc. This miniaturized VCO features phase noise of -102 dBc/Hz @ 10 kHz offset while operating off a 3.3Vdc supply and typically drawing only 13mA of current.
Low Cost VCO Provides Wideband Solution for Satellite Communication Systems
Z-Communications, Inc. is once again displaying its engineering prowess in VCO technology by introducing the SMV5550B-LF. This high performance VCO generates frequencies between 5000 and 6000 MHz, covering the 1000 MHz bandwidth within 0 to 10 V of control. Even though the device covers a broad spectrum of bandwidth, the SMV5550B-LF comes in a compact package covering an area less than .10 sq. inches while exhibiting remarkably good phase noise performance of -80 dBc/Hz, typically, at 10kHz from the carrier.
Ultra Small VCO Ideal for Mobile Radios
Z-Communications, Inc. announces a new RoHS compliant Voltage Controlled Oscillator model USSP2350-LF for mobile communication system applications where low power consumption and small package size are critical. The USSP2350-LF covers the frequency range of 2300-2400 MHz in 0.5 to 3.0V of tuning voltage. This high performance VCO comes available in a compact surface mount package measuring a mere 0.2 x 0.2 x 0.04 while operating off 2.7V and drawing only 6mA, typically.
CRO3500C-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO3500C-LF in S-band. The CRO3500C-LF operates at 3500 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -111 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 5 MHz/V.
Z-Communications - CLV1075A-LF VCO Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CLV1075A-LF in L-band. The CLV1075A-LF operates at 830-1300 MHz with a tuning voltage range of 0.5-17 Vdc. This VCO features a typical phase noise of -105 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 35 MHz/V.
VCO: SMV3727A-LF Operates at 3710-3744 MHz
Z-Communications announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model SMV3727A-LF in S-band. The SMV3727A-LF operates at 3710-3744 MHz with a tuning voltage range of 0.5-3 Vdc. This VCO features a typical phase noise of -83 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 142 MHz/V.
Z-Communications VCO: CRO2912A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO2912A-LF in S-band. The CRO2912A-LF operates at 2875-2950 MHz with a tuning voltage range of 1-18 Vdc. This VCO features a typical phase noise of -113 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 9 MHz/V.
Z-Communications - CRO3262B-LF VCO Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO3262B-LF in S-band. The CRO3262B-LF operates at 3261-3263 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -113 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 5 MHz/V.
VCO: CRO2211B-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO2211B-LF in S-band. The CRO2211B-LF operates at 2184-2238 MHz with a tuning voltage range of 0.5-4.5 Vdc.
Z Comms Voltage-Controlled Oscillator SMV5320A-LF
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model SMV5320A-LF in C-band. The SMV5320A-LF operates at 5245-5395 MHz with a tuning voltage range of 1-4 Vdc. This VCO features a typical phase noise of -81 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 170 MHz/V.
VCO: V500ME03-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant Voltage-Controlled Oscillator model V500ME03-LF in UHF-band. The V500ME03-LF operates at 500-1000 MHz with a tuning voltage range of 0-11 Vdc. This VCO features a typical phase noise of -105 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 54 MHz/V.
CLV1020A-LF VCO Features Low Phase Noise
Z-Communications, Inc. announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CLV1020A-LF in L-band. The CLV1020A-LF operates at 960-1080 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -106 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 40 MHz/V.
V585ME12-LF Low Phase Noise VCO from Z-Communications
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model V585ME12-LF in L-Band. The V585ME12-LF operates at 1500-1900 MHz with a tuning voltage range of 0.8-20 Vdc. This VCO features a typical phase noise of -102 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 35 MHz/V.
VCO: CRO3150A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO model CRO3150A-LF in S-band. The CRO3150A-LF operates at 3125-3175 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -108 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 21 MHz/V.
Z-Communications - V846ME29-LF Wide Frequency VCO
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model V846ME29-LF. The V846ME29-LF operates at 2900-4400 MHz with a tuning voltage range of 1-22 Vdc. This VCO features a typical phase noise of -80 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 90 MHz/V.
Z-Communications - Waveguide-to-Coax Adapters and Precision Low Powered Waveguide Termination Products
Z-Communications announced its latest in innovative product development with a new line of waveguide solutions. The waveguide product line provides the microwave industry a new high performance, low cost choice when selecting top of the line precision waveguides for their equipment needs. Z-Communications waveguide products feature a complete list of full-band waveguide-to-coax-adapters along with precision low powered waveguide terminations covering 5 GHz to 40 GHz. Both are sure to make a significant impact in the waveguide marketplace due to their uncompromised performance at an unmatched price.
Fixed Frequency Synthesizer: SFS10000C-LF Features Ultra Low Phase Noise
Z-Communications, Inc. announced a new RoHS compliant Fixed Frequency Synthesizer model SFS10000C-LF in X-band. The SFS10000C-LF is a single frequency synthesizer that operates at 10 GHz. This synthesizer features a typical phase noise of -100 dBc/Hz @ 10 KHz offset and typical sideband spurs of -70 dBc.
VCO: CRO2477A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO model CRO2477A-LF in S-band. The CRO2477A-LF operates at 2440-2540 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -108 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 30 MHz/V.
V940ME28-LF High Frequency VCO Solution from Z Comms
Z-Communications, Inc. announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model V940ME28-LF in C-band. The V940ME28-LF operates at 5840-6040 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -85 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 85 MHz/V.
VCO: CLV0850A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO model CLV0850A-LF in UHF band. The CLV0850A-LF operates at 850-851 MHz with a tuning voltage range of 0.5-3.3 Vdc. This VCO features a typical phase noise of -112 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 31 MHz/V.
CRO3260A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO3260A-LF in S-band. The CRO3260A-LF operates at 3203-3317 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -103 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 42 MHz/V.
VCO: CRO2690A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO2690A-LF. The CRO2690A-LF operates at 2690 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -114 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 7 MHz/V.
CRO5750Z-LF VCO Features Low Phase Noise
Z-Communications, Inc. announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO5750Z-LF. The CRO5750Z-LF operates at 5740-5760 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -106 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 15 MHz/V.
CRO3000B-LF VCO Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO3000B-LF. The CRO3000B-LF operates at 3000 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -115 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 11 MHz/V.
PCA1550B-LF VCO Features Ultra Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant PLL (Phase-Locked Loop) model PCA1550B-LF in L-band. The PCA1550B-LF operates from 1502-1510 MHz. This PLL features a typical phase noise of -101 dBc/Hz @10 KHz offset and typical sideband spurs of -70 dBc.
Fixed Frequency Synthesizer: SFS6400A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant Fixed Frequency Synthesizer model SFS6400A-LF in C-band. The SFS6400A-LF is a single frequency synthesizer that operates at 6400 MHz. This Synthesizer features a typical phase noise of -88 dBc/Hz @ 10 KHz offset and typical sideband spurs of -65 dBc.
Fixed Frequency Synthesizer: SFS3900A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant Fixed Frequency Synthesizer model SFS3900A-LF in S-band. The SFS3900A-LF is a single frequency synthesizer that operates at 3900 MHz. This Synthesizer features a typical phase noise of -88 dBc/Hz @ 10 KHz offset and typical sideband spurs of -65 dBc.
CLV0986E-LF VCO From Z-Communications Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CLV0986E-LF. The CLV0986E-LF operates at 971-1002 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -113 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 18 MHz/V.
Backhaul Radio VCO Exhibits Superior Phase Noise Performance
A low noise Voltage Controlled Oscillator from Z-Communications, Inc. (San Diego, CA) has been specially designed for the backhaul radio market. The ZRO2460B1LF is a technology breakthrough device featuring amazingly low phase noise with unmatched stability. This compact yet robust device operates from 2435-2485 MHz within a tuning voltage range of 1-10 Vdc. The ZRO2460B1LF offers superior SSB spectral purity of -113 dBc/Hz, typically, at 10 kHz from the carrier while covering the bandwidth with an average tuning gain of 8 MHz/V.
CRO3450B-LF Voltage-Controlled Oscillator Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO3450B-LF in S-band. The CRO3450B-LF operates at 3449-3451 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -112 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 8 MHz/V.
SFS2030A-LF Fixed Frequency Synthesizer Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant Fixed Frequency Synthesizer model SFS2030A-LF in S-band. The SFS2030A-LF is a single frequency synthesizer that operates at 2030 MHz. This Synthesizer features a typical phase noise of -95 dBc/Hz @ 10 KHz offset and typical sideband spurs of -70 dBc.
SFS1770A-LF - Fixed Frequency Synthesizer Features Low Phase Noise
Z-Communications, Inc. announced a new RoHS compliant Fixed Frequency Synthesizer model SFS1770A-LF in L-band. The SFS1770A-LF is a single frequency synthesizer that operates at 1770 MHz. This Synthesizer features a typical phase noise of -95 dBc/Hz @ 10 KHz offset and typical sideband spurs of -70 dBc.
SFS1980A-LF - Fixed Frequency Synthesizer Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant Fixed Frequency Synthesizer model SFS1980A-LF in L-band. The SFS1980A-LF is a single frequency synthesizer that operates at 1980 MHz. This Synthesizer features a typical phase noise of -95 dBc/Hz @ 10 KHz offset and typical sideband spurs of -70 dBc.
Fixed Frequency Synthesizer Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant Fixed Frequency Synthesizer model SFS1730A-LF in L-band. The SFS1730A-LF is a single frequency synthesizer that operates at 1730 MHz. This Synthesizer features a typical phase noise of -95 dBc/Hz @ 10 KHz offset and typical sideband spurs of -70 dBc.
Fixed Frequency Synthesizer: SFS2365A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant Fixed Frequency Synthesizer model SFS2365A-LF in S-band. The SFS2365A-LF is a single frequency synthesizer that operates at 2365 MHz. This Synthesizer features a typical phase noise of -95 dBc/Hz @ 10 KHz offset and typical sideband spurs of -70 dBc.
Fixed Frequency Synthesizer: SFS1720A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant Fixed Frequency Synthesizer model SFS1720A-LF in L-band. The SFS1720A-LF is a single frequency synthesizer that operates at 1720 MHz. This Synthesizer features a typical phase noise of -96 dBc/Hz @ 10 KHz offset and typical sideband spurs of -70 dBc.
Fixed Frequency Synthesizer: SFS1609A-LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant Fixed Frequency Synthesizer model SFS1609A-LF in L-band. The SFS1609A-LF is a single frequency synthesizer that operates at 1609 MHz. This Synthesizer features a typical phase noise of -95 dBc/Hz @ 10 KHz offset and typical sideband spurs of -70 dBc.
ZRO2460B1LF - VCO Features Low Phase Noise
Z-Communications announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model ZRO2460B1LF in S-band. The ZRO2460B1LF operates at 2435-2485 MHz with a tuning voltage range of 1-10 Vdc. This VCO features a typical phase noise of -113 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 8 MHz/V.
VCO: le V624ME05-LF présente un faible bruit de phase
Z-Communications, Inc. annonce un nouveau VCO faible bruit de phase (Voltage-Controlled Oscillator) compatible ROHS modèle V624ME05-LF en bande S. Le V624ME05-LF fonctionne de 1780 à 2220 MHz avec une tension de commande de 0.5 à 20 Vdc. Le VCO présente un bruit de phase typique de -103 dBc/Hz @ 10 KHz de la porteuse avec une sensibilité de réglage de 28 MHz/V.
SFS6520A-LF Fixed Frequency Synthesizer Features Low Phase Noise
Z-Communications, Inc. announced a new RoHS compliant Fixed Frequency Synthesizer model SFS6520A-LF in C-band. The SFS6520A-LF is a single frequency synthesizer that operates at 6520 MHz. This Synthesizer features a typical phase noise of -90 dBc/Hz @ 10 KHz offset and typical sideband spurs of -65 dBc.
CRO2660B-LF- VCO Features Low Phase Noise
Z-Communications, Inc. announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model CRO2660B-LF in S-band. The CRO2660B-LF operates at 2660 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -114 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 5 MHz/V.
V624ME05-LF: VCO Features Low Phase Noise
Z-Communications, Inc. announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model V624ME05-LF in S-band. The V624ME05-LF operates at 1780-2220 MHz with a tuning voltage range of 0.5-20 Vdc. This VCO features a typical phase noise of -103 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 28 MHz/V.
ZRO2407A1LF Features Low Phase Noise
Z-Communications, Inc. announces a new RoHS compliant VCO model ZRO2407A1LF in S-band. The ZRO2407A1LF operates at 2400-2415 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -115 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 14 MHz/V.
VCO from Z-Communications Features Low Phase Noise
Z-Communications has announced a new RoHS compliant VCO (Voltage-Controlled Oscillator) model ZRO2405A1LF in S-band. The ZRO2405A1LF operates at 2400-2410 MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -116 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 8 MHz/V.
VCO Features Low Phase Noise
Z-Communications has announced a RoHS compliant VCO (Voltage-Controlled Oscillator) model ZRO1920A1LF in L-band. The ZRO1920A1LF operates at 1920MHz with a tuning voltage range of 0.5-4.5 Vdc. This VCO features a typical phase noise of -117 dBc/Hz @ 10 KHz offset and a typical tuning sensitivity of 5 MHz/V.
Page 1 2
