Teseq Ltd
Ashville Way
Molly Millar's Lane
Wokingham
RG41 2PL
United Kingdom
Phone
+44 118 977 0070
Fax
+44 118 979 2969
Web Address
www.teseq.com
Teseq Ltd Company Details
Enhanced DC LISN from Teseq Measures Disturbances at Higher Current
Teseq now offers a high current impedance stabilization network for measuring conducted emissions disturbances on DC power ports of photovoltaic inverters. The DC-LISN-M2-100, which conforms to the latest requirements of the international standard working group MT GCPC (grid connected power conditioners), can run at a maximum operating current of 150 A for 30 minutes, or continuously at 100 A.
Teseq met au point un réseau de couplage/découplage destiné aux essais d'ondes de choc pour les télécommunications
Teseq a conçu un nouveau réseau de couplage/découplage (CDN) destiné aux essais d'ondes de choc sur des lignes de télécommunications haut débit symétriques non blindées, comme Ethernet. Le CDN HSS-2 permet d'effectuer des essais d'ondes de choc avec des impulsions de 1,2/50 µs sur des lignes de télécommunications actives.
Teseq Develops Coupling/Decoupling Network For Telecom Surge Testing
Teseq has designed a new coupling/decoupling network for surge testing on unshielded symmetrical high speed telecommunication lines including Ethernet. The CDN HSS-2 enables convenient surge testing with 1.2/50 µs pulses on active telecom lines. Ideal for use in laboratories, Teseq's CDN HSS-2 is compliant with IEC 61000-4-5 and is compatible with all industry standard surge generators.
MILMEGA lance une nouvelle gamme d'amplificateurs
MILMEGA, une filiale de Teseq et un concepteur et fabricant leader d'amplificateurs hyperfréquence et radiofréquence de grande puissance, lance la nouvelle gamme de produits AS0728.
Teseq propose un nouveau CDN triphasé pour salves d'impulsions, destiné aux essais TER
TESEQ, concepteur et fournisseur leader d'instruments et de systèmes d'essais d'émissions CEM et d'immunité, propose désormais un réseau de couplage/découplage (CDN) triphasé à salve d'impulsions de 200 A, destiné aux essais de transitoire électrique rapide (TER) en salves. Le nouveau CDN 3083-B200 gère facilement des courants d'appel élevés et des courants de crête à forme d'impulsions, ce qui en fait le réseau idéal pour tester des équipements à courant et puissance élevés dans de grands appareils, machines et applications de réseau intelligent.
Les modèles d'armoires réverbérantes XS et 2XS offrent des hautes performances dans une enceinte d'essai RF compacte et déplaçable
Teseq, un concepteur et fournisseur leader d'instruments et de systèmes d'essais d'émissions CEM et d'immunité, présente deux nouvelles armoires réverbérantes, les modèles XS et 2XS, qui viennent s'ajouter à sa gamme déjà extensive.
3-Phase Burst Pulse CDN from Teseq Ideal for High Current, High Power Testing
Teseq has announced today that it now offers a 200 A 3-phase burst pulse coupling/decoupling network for electrical fast transient and burst testing. The new CDN 3083-B200 easily handles high inrush currents and pulse-shaped peak currents, making it ideal for testing high current and high power equipment in large machines, appliances and smart grid applications.
NSG 439 Robotic ESD Solution
NSG 439 from Teseq delivers Fully Automated Robotic ESD Testing, a complete system solution with 30 kV ESD simulator for robotic applications.
Teseq Magnetic Field Coil Generates Fields Up To 1200 A/m
Teseq today debuted a new magnetic field coil that generates fields up to 1200 A/m during magnetic field testing. The INA 703 is designed for testing to IEC 61000-4-8 (supply frequency magnetic fields), IEC 61000-4-9 (pulsed magnetic fields) and IEC 61000-4-10 (oscillatory magnetic fields) standards. It is ideal for medical equipment, military, avionics, aerospace and industry applications.
Teseq annonce l'acquisition d'IFI afin de renforcer sa présence sur le marché des amplificateurs RF
Teseq, un concepteur et fournisseur leader d'instruments et de systèmes d'essais d'émissions CEM et d'immunité, a l'intention d'acquérir de la société new-yorkaise, Instruments for Industry (IFI), un concepteur et fabricant leader d'amplificateurs à semi-conducteurs et à tubes à ondes progressives.
Teseq présente le nouveau réseau de couplage/découplage pour ligne d'alimentation triphasée
Teseq, un concepteur et fournisseur leader d'instruments et de systèmes d'essais d'émissions CEM et d'immunité, a conçu la série CDN 3043 de réseau de couplage/découplage pour ligne d'alimentation triphasée comme une extension hautes performances et à tarif compétitif de la série NSG 3040 de générateurs multifonctions.
Teseq Introduce New 3-Phase Coupling/Decoupling Network Series
Teseq has designed the CDN 3043 3-phase coupling/decoupling network series as a competitively priced, high performance extension to the NSG 3040 multifunction generator series. 6 different models are available to provide customers with an optimum price/performance solution. All models feature a high level of user comfort and common safety functions, they range from a single function 16A unit up to a combined version rated at 32A. Higher current ratings are covered by the CDN 3063 series.
Teseq Holding AG fait l'acquisition de MILMEGA pour renforcer ses capacités dans le domaine des amplificateurs HF de puissance
Teseq Holding AG, un développeur et fournisseur, leader au niveau international, dans les domaines de l'instrumentation et des systèmes pour test d'émissions et d'immunité CEM, Cf. EMC emission and immunity testing, a fait l'acquisition de la société MILMEGA Ltd, entreprise basée en Angleterre, spécialisée dans la conception et la fabrication d'amplificateurs à semi-conducteurs pour les micro-ondes et la HF de forte puissance. Cette acquisition renforce les capacités de Teseq au niveau des applications commerciales, industrielles, automobiles, militaires et de la communication, confirmant de plus, la position de la société en tant que leader au niveau mondial dans le domaine des tests d'immunité.
Teseq Acquires MILMEGA to Expand RF Power Amplifier Capabilities
Teseq Holding AG , a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, has acquired UK-based MILMEGA, Ltd., a leading specialist in the design and manufacture of solid state, high-power microwave and RF amplifiers. The acquisition strengthens Teseq capabilities in commercial, industrial, automotive, military and communications applications, further positioning the company as a global leader in immunity testing.
New TESEQ USB Controlled Power Meter Operates Over 9 kHz to 3 GHz
Teseq has introduced the new model PMU 6003 to its power meter product range. The PMU 6003 is designed for a large variety of applications over the frequency range of 9 kHz to 3 GHz. The main features of the PMU 6003 include a large dynamic range of more than 65 dB, a high measurement speed of less than 16ms in the entire dynamic range as well as a rugged design.
La nouvelle pince de couplage TER/S de TESEQ : une solution durable
Teseq, un concepteur et fournisseur leader d'instruments et de systèmes d'essais d'émissions CEM et d'immunité, présente le réseau de couplage/découplage CDN 3425, une nouvelle pince de couplage TER/S satisfaisant aux normes actuelles et à venir. De par sa conception ergonomique, le CDN 3425 allie performances élevées et prix compétitif, et intègre des accessoires de sécurité et d'étalonnage innovants.
New TESEQ Burst/EFT Coupling Clamp is Future Proof
Teseq has released the CDN 3425, a Burst/EFT coupling clamp which meets current and forthcoming standards. The ergonomically designed CDN 3425 offers high performance at a competitive price and features innovative safety and calibration accessories. The CDN 3425's principle function is to couple Burst/EFT pulses to data lines. It may also be used to couple to mains lines where no CDN is available; for example high current lines >200 A.
Nouveau dispositif d'absorption en mode commun (CMAD) de TESEQ pour des mesures d'émissions reproductibles
Teseq, un concepteur et fournisseur leader d'instruments et de systèmes d'essais d'émissions CEM et d'immunité, présente une nouvelle pince de terminaison de ligne conforme aux méthodes d'essais CISPR.
New TESEQ Common Mode Absorption Device (CMAD) ensures reproducible emissions measurements
Teseq has introduced a new line termination clamp as required by CISPR test methods. Reproducible emissions measurements require a defined line termination for the frequency range where connected lines provide a significant influence on the emissions. The key parameter is the asymmetrical impedance (common-mode impedance) which can be seen as the common-mode impedance to the reference ground.
Nouveau simulateur DES de TESEQ avec relais de décharge intégré
Teseq, un concepteur et fournisseur leader d'instruments et de systèmes d'essais d'émissions CEM et d'immunité, présente le NSG 438A, un nouveau simulateur de décharges électrostatique (DES) intégrant un circuit avec relais de décharge permettant de dissiper la charge résiduelle des équipements d'essai (EST) qui ne sont pas reliés à la terre.
New TESEQ ESD Simulator Features Built-In Discharge Relay
Teseq has introduced the NSG 438A, a new ESD simulator that includes an integrated discharge relay circuit to dissipate residual voltage in conventional ESD testing and ungrounded equipment under test (EUT) applications. The relay in the new simulator provides unique controlled and reproducible discharge and observation time periods along with a discharge operation that is programmable in three separate time segments. It can also be retrofitted into any existing Teseq NSG 438 or NSG 439. By connecting a 1 MΩ resistor from the EUT to ground for a controlled time segment that dissipates the residual voltage, the NSG 438A has set new benchmarks in flexibility and reproducibility of EMC testing.
Le nouvel Amplificateur de puissance Teseq offre fiabilité et régularité La technologie de circuits intégrés GaAs IC améliore la compression
Teseq, leader en développement et en fourniture d'instrumentation et de systèmes de tests d'émission et d'immunité CEM, a élargi sa gamme d'amplificateurs à large bande en incluant un nouveau modèle classe A fonctionnant de 10 kHz à 400 MHz avec un niveau de saturation de 110 W. Le CBA 400M-110 utilise la technologie des circuits intégrés en arséniure de gallium (GaAs) afin de fournir des caractéristiques de compression nettement supérieures et une efficacité accrue, que les amplificateurs de puissance à base de silicium comparables.
Teseq's New Power Amplifier Delivers Reliability and Consistency GaAs IC technology improves compression
Teseq has expanded its broadband amplifier line to include a new Class A model that operates from 10 kHz to 400 MHz with a saturated power level of 110 W. The CBA 400M-110 uses gallium arsenide (GaAs) integrated circuit technology to provide markedly better compression characteristics and increased efficiency than comparable silicon-based power amplifiers.
New TESEQ CDNE Coupling/Decoupling Network for Emission Testing
Teseq, has developed a new coupling/decoupling (CDNE) network for emissions testing. The publication of EN 55015, based on CISPR 15 A1 Ed 7, has introduced an independent method of measurement of radio disturbance characteristics of electrical lighting equipment. This method specifies the use of a coupling/decoupling network (CDN) as defined in IEC 61000-4-6 for emission measurement in the frequency range 30 to 300 MHz.
Nouveau réseau de stabilisation d'impédance de ligne de TESEQ permettant d'effectuer des essais d'émissions conduites sur des conditionneurs d'alimentation raccordés au réseau
TESEQ, un concepteur et fournisseur leader d'instruments et de systèmes d'essais d'émissions CEM et d'immunité, présente un nouveau réseau de stabilisation d'impédance de ligne (RSIL) permettant d'effectuer des essais d'émissions conduites sur des conditionneurs d'alimentation raccordés au réseau. Le DC-LISN-M2-25-V1 permet de mesurer les perturbations asymétriques sur des ports de puissance en courant continu dans une plage de fréquences comprises entre 150 kHz et 30 MHz.
TESEQ lance un nouveau générateur de tests pour la simulation de baisses, interruptions et variations de tension
Teseq, l'un des leaders mondiaux de la fabrication et de la commercialisation d'instrumentation et de systèmes pour tests CEM d'émissions et d'immunité, annonce le lancement du générateur NSG 3040-DDV, qui produit des ondes de test pour la simulation de baisses, interruptions et variations de tension. Le nouveau NSG 3040-DDV est le premier modèle d'une série de générateurs à fonction unique dérivés de la populaire famille de générateurs combinés NSG 3040.
Test Generator from TESEQ simulates Supply Dips, Drops and Variations
Teseq announced the launch of the NSG 3040-DDV generator which provides test waveforms for simulating Supply Dips, Drops and Variations. The new NSG 3040-DDV is the first in a series of single-function generators derived from the successful NSG 3040 family of combination generators.
Line Impedance Stabilization Network from TESEQ for conducted emissions testing of Grid Connected Power Conditioners
TESEQ, a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, introduces a new Line Impedance Stabilization Network (LISN) for conducted emissions testing of Grid Connected Power Conditioners (GCPC). The DC-LISN-M2-25-V1 is designed for measuring unsymmetrical disturbances on DC power ports in the frequency range from 150 kHz to 30 MHz.
Le logiciel Compliance 5 de Teseq intègre désormais les programmes d'essais CEM du secteur aérospatial Nouveaux essais d'émissions et de susceptibilité conformes à RTCA/DO 160
Teseq, un concepteur et fournisseur leader d'instruments et de systèmes d'essais d'émissions CEM et d'immunité, présente des applications aérospatiales d'essais d'émissions RF et de susceptibilité conformes à DO160 à utiliser dans le logiciel d'essais CEM Compliance 5.
WIN 3000 Introduction Video
WIN 3000 remote control software for the NSG 30xx generator family
Multifunction Generator NSG 3060
Multifunction Generator NSG 3060: EMC Transient Test Generator 6.6 kV Burst Surge PQT
Systems NSG 5500 / NSG 5600
Systems NSG 5500 / NSG 5600: Automotive Transient Immunity Test Systems
ITS 6006: EMC RF Immunity Test System 6 GHz
The ITS 6006, ideal for use in a variety of EMC applications including information technology, medical, RF, traffic telematics and mobile communications.
Teseq Compliance 5 Software now features aerospace EMC Test Routines
Teseq, a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, announced the introduction of the aerospace DO160 RF emission and susceptibility test applications for use in Compliance 5 EMC test software.
Teseq Compliance 5 Software now features aerospace EMC Test Routines
Teseq, a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, announces the introduction of the aerospace DO 160 RF emission and susceptibility test application for use in Compliance 5 EMC test software.
New USB Interface on All Teseq RF Amplifiers Simplifies Operation
Teseq, a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, now offers an integrated USB port on its complete range of CBA series, solid-state, class-A power amplifiers that offer frequency and power ratings specifically for EMC immunity test applications.
Teseq launches new Branch in Taipei
TESEQ has officially opened a new office in Taipei City. Headquartered in Switzerland, this global developer and provider of instrumentation and systems for EMC emission and immunity testing, has again expanded its reach in Asia. TESEQ recognises the unique business environment facing Taiwan customers and the distinct opportunities and competitive conditions it presents. With offices on both sides of the border in Taipei and Beijing, TESEQ is strategically positioned to support the EMC needs of local businesses and their extensions in China as well.
TESEQ Dual Voltage Programmable Power Source
Teseq, a leading developer and provider of instrumentation and systems for EMC emissions and immunity testing, has released the VAR 3005, a dual voltage power source controlled by Teseq's NSG 3000 series of EMC test generators. This new programmable power source not only regulates test voltage, but also generates the reduced voltage for dips and drops testing of EUTs (Equipment Under Test).
TESEQ Japan Calibration Laboratory approved for Initial Accreditation with A2LA
TESEQ, the leading developer and provider of instrumentation and systems for EMC emission and immunity testing, has gained initial accreditation by The American Association for Laboratory Accreditation (A2LA) to ISO/IEC 17025 for Teseq Japan's Calibration laboratory in Nagoya, Japan, listed in A2LA Certificate # 2127.03.
TESEQ Releases Upgraded EMC Test Software with Industry-specific Test Packages for Quicker Set-up
TESEQ, a leading developer and provider of instrumentation and systems for EMC emission and immunity testing, has released Compliance 5 emission and immunity test software. Compliance 5 is a single, integrated test platform capable of performing all RF EMC testing needs.
New RF Emission and Immunity (Susceptibility) test software Compliance 5 released
Teseq have released the new Compliance 5 test software along with dedicated applications to automate commercial and military testing. DO160 aerospace packages will be available by the end of the year and Automotive packages will be launched in the near future.
Rugged Power Meters from Teseq
EMC immunity testing makes very specific demands on RF power meters. A large dynamic range, fast measurements, rugged design and a frequency range that matches the application are some of the unique requirements for power meters in an EMC test environment.
New Teseq Radiated Immunity Test System Covers 80MHz to 6GHz
TESEQ announces the introduction of its new ITS 6006 radiated immunity test system. The ITS 6006 consists of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for a wide range of radiated EMC applications in the 80 MHz to 6 GHz frequency range. In addition to the generator, the system includes the AM and PM modulators necessary for EMC testing. Other modulators can be connected to the external modulation input of the ITS 6006. The RF signal can be switched to one of four outputs, where up to four power amplifiers can be connected directly. Additional RF switches are available for combining two amplifier paths into a single antenna connection. Two of these relays are included for the four amplifier paths.
USO 4013 USB-to-serial/optical converter
The USO 4013 is a fast, universal USB-to-serial converter with an optical and an RS232 port, which can be optionally configured as an RS485 port. Its optical port drives a fiber optic converter with a transmission speed of 3 MBd for distances of up to 40 m, allowing potential- and trouble-free remote control of electrical devices with a serial port. The RS232 port has a maximum transmission speed of 1 MBd.
Teseq - Power meter 1 MHz to 6 GHz
EMC immunity testing makes very specific demands on RF power meters. A large dynamic range, fast measurements, rugged design and a frequency range that matches the application are some of the unique requirements for power meters in an EMC test environment.
Radiated Immunity Test System 6 GHz
The ITS 6006 consist of an integrated RF signal generator, RF switch and EUT monitoring interfaces. The unit is designed for various radiated EMC applications in the 80 MHz to 6 GHz frequency range. In addition to the generator, the system includes the AM and PM modulators necessary for EMC testing. Other modulators can be connected to the external modulation input of the ITS 6006. The RF signal can be switched to one of four outputs, where up to four power amplifiers can be connected directly. Additional RF switches are available for combining two amplifier paths into a single antenna connection. Two of these relays are included for the four amplifier paths.
New EMC Emission Field Probes from Teseq Offer High Performance in Compact Size
TESEQ, the leading developer and provider of instrumentation and test systems for EMC emission and immunity testing, announces the introduction of two new USB/RS232 electric field probes. The PMM EP-600 and EP-601 active broadband field probes benefit from a true spherical symmetrical dipole configuration.
Singapore Laboratory Achieves ISO 17025 Certification from A2LA
Teseq Singapore has announced that its Calibration Laboratory has attained accreditation to the ISO/IEC 17025:2005 standard by the American Association for Laboratory Accreditation (A2LA) as of 7th December 2009. This includes accreditation to ANSI/NCSL Z540-1-1994 and admission to the ILAC International Mutual Recognition Agreement.
Teseq Fully CISPR-Compliant Digital EMC/EMI Receivers
TESEQ has announced the introduction of the Narda PMM 9010, a fully digital receiver covering the frequency range 10 Hz to 6 GHz. The PMM 9010 is the cornerstone of a system which grows together with the users' needs. All EMC conducted measurements are be possible by simply upgrading the PMM 9010 with specific options, e.g. Click Meter, and accessories such as LISNs and probes This will allow the PMM 9010 to provide full compliance testing to any known international standard or proprietary specifications.
Teseq's Test System For Conducted And Radiated Immunity
TESEQ, the provider of instrumentation and test systems for EMC emission and immunity testing announces the introduction of its updated NSG 4070 multifunctional EMC immunity test system. The Teseq NSG 4070 offers a wide test frequency range, from 9 kHz to 1 GHz and its modular set-up, using internal or external amplifiers, make it suitable for a wide variety of test applications.
Page 1 2
