+ 41 (0) 44 877 35 00
+ 41 (0) 44 877 35 25
+ 41 (0) 44 877 35 00
+ 41 (0) 44 877 35 25
The PSD18-410 series is optimally suited for applications where water or even aggressive media must be measured at low pressures starting at 0 - 100 mbar or at pressures up to 7 bar. The PSD18-410 is an oil-filled stainless steel sensor. With a diameter of just 18 mm, it is very compact and is especially useful in areas where precise measurements are required even when space is very limited.
The new PEWATRON KKD34-701 capacitive pressure sensor handles measurements in the range of 0 - 60 mbar and can be trimmed electronically to 0 - 12 mbar. In addition to this measurement range, it is also possible to make corrections to account for effects arising during assembly by means of an integrated interface. Parameterisation is accomplished with a Windows-compatible, menu-driven kit.
The CCD54 is an intelligent, calibrated and amplified OEM pressure sensor. Its offset correction, sensitivity, temperature drift and linearity are stored in the on-chip EEPROM directly at the factory using the latest ASIC technology. Different initial configurations are possible, such as the response time or supply voltage.
PEWATRON launches the KMA36 universal magnetic encoder from Measurement Specialties. It seamlessly combines a magnetoresistive sensor array with an analog-to-digital converter and a signal processor in a compact TSSOP package.
Oxygen can be measured with the aid of various physical processes. The Fujikura oxygen sensor is a zirconium dioxide solid electrolyte sensor which employs the current limitation principle. In contrast to conventional solid electrolyte sensors, no reference gas is required.
PEWATRON was quick to recognise the changing times and has extended its wide range of pressure sensors by adding a large selection of digital interface sensors. Most in demand are sensors with the I2C interface. These sensors can be operated using a supply voltage in the range 2.7…5.5 VDC. The resolution is 12 bit.
PEWATRON offers the new Midori low power sensor, which is ideally suited for battery operated devices. The magnetoresistive technology allows for a superb low current consumption of 0.6 mA typical at 9 V. Thus consuming more than 20 times less current than a comparable Hall-effect based device.
The PHPSD series are piezoresistive pressure sensors with a measuring range of 0...10 mbar up to 7 bar. These sensors are available with or without temperature compensation and amplifi er, as well as with a choice of either digital or analogue output signal in each case.
PEWATRON announce the release of US Digital's latest absolute, blind hollow bore shaft encoder, the HBA4. This single turn absolute encoder provides 16-bits of resolution over 360 degrees of shaft rotation. The HBA4 is available with a 12 mm or 0.500" diameter bore size with either a ball bearing or sleeve bushing bearing assembly and is sealed to an IP65 rating. The absolute encoder slips over a shaft and is locked in place with a unique self centering ring clamp.
The controlled DC-DC converters of the DFED/DFEC series by Power Mate supply 15 to 60W out of a highly compact enclosure size for fi tting on a TS35-7.5/-15 mounting rail. From the wide-range inputs 2:1 (9.5-18V, 18-36V, 36-75V) or 4:1 (9.5-36V, 18-75V) onwards, simple output voltages of 3.3V, 5V, 12V and 15V, dual voltages of ±12V, ±15V as well as triple outputs of 3.3/±12V, 3.3/±15V, 5/±12V, 5/±15V are available.
PEWATRON's new low cost 2-axis inclinometers PEI-Z210-PCB-V1 and PEI-Z215-PCB-V1 are developed for the automotive equipment market, specially the wheel aligners and wheel balancers.
The Current Converters of the HJ-A series excel by their multifunctionality, their digital interface and the little space they require on a mounting rail. The sensors of the HJ-A series meter the root mean square value (true RMS) of the current of 1 to 3 phases, as desired, and optionally also the voltage, the effective power and reactive power, the energy in kWh as well as the frequency and the power factor (cos φ).
PEWATRON has introduced the PUP180 series of CEC and Energy Star Level IV compliant, energyefficient and powerful AC/DC desktop power supply units which have an output of 180W, making it the most powerful performer in the industry. The air-cooled and low-weight unit (860g) in very compact housing measuring 170x85x41mm is ideal for state-of-the-art high-performance applications, for example for monitors, computers, network accessories, testing and inspection devices, printers and much more.
After launching the SPV-1500(1500W) series from Mean Well, a single output enclosed type power supply with programmable output voltage function, PEWATRON extends its product range to the lower wattage of 150W and 300W - SPV-150 and SPV-300 series. By adding a 1~5.5 VDC external control signal, the output voltage of both series can be trimmed from 20% to 110% of the rated value, which greatly increases the fl exibility to the system end users and adequately fulfi ls the demand of equipment that require a switching between different output voltages.
PEWATRON has introduced two further high performance DC/AC inverters from Mean Well – the TS-200 (200W) and TS-400 (400W) models, after already launching the TN/TS-1500 (1500W), TS-1000 (1000W) and TS-700 (700W) extending the product range into the lower power fi eld. Users can now choose, for their various operational needs, products from a complete range of inverters starting from 200W and going up to 1500W. Using high frequency circuit technology, the true sine wave inverters are very light-weight and offer up to 88.5% effi ciency and a very low distortion factor of <3%.
The current sensors from the series RAZC-2, RAZV-2 and RAZU-2 are ultra compact and cost-effective current sensors for PCB mounting, and are best suited for current measurements and current control in switch-mode power supplies, motor controllers, charge regulators and much more.
The PWA range of contactless angle sensors from Pewatron feature an electrical angle up to 360° and 12 bit resolution and have been designed as a solution for industrial as well as mobile applications.
PEWATRON produces miniature and sub-miniature stepper motors for positioning tasks where space is limited such as photographic cameras, vending machines, small robots, medical engineering products, microscope-XY tables, pointer instruments, valve controls, ticket machines etc.