Goldlay House,
114 Parkway,
Chelmsford,
Essex.
CM2 7PR. UK
United Kingdom
Phone
01245 491499
Fax
01245 491801
Web Address
www.lasercomponents.co.uk
LASER COMPONENTS (UK) Ltd Company Details
Two-Dimensional Position Sensing Detectors
LASER COMPONENTS is proud to offer the SiTek range of two-dimensional position sensing detectors (PSDs), which give high accuracy (±0.3% typical non-linearity) readings over areas up to 45mm x 45mm. These detectors are also available with UV- or YAG enhancement or as nuclear detectors.
Made in Germany – The Substrate as a Basis for High-Quality Laser Optics
Increasing demands on laser optics have brought about improvements in the quality and precision of raw substrates. To meet these demands the production of spherical lenses has become one of LASER COMPONENTS' core competencies.
New Software Release for the SPF-290S UV spectrometer
LASER COMPONENTS is pleased to announce the release of V4.1 of its popular WinSPF software for the SPF-290S Sunscreen Protection Factor Analyzer. Also available is a new Sample Assembly Locator Plate for users of manual SPF-290S models and the availability of new Audio Visual Training Aids.
New range of interference filters for photolithography
LASER COMPONENTS can now offer filters, which are specifically designed for the photolithography process. These bandpass filters produce a high performance result, which resolves monochromatic wavelengths reaching the photo mask substrate so that optimum resolution is achievable.
Ball Mounted Hollow Retroreflectors for laser tracker targets, offer superior performance and accuracy.
These instruments measure distances and coordinates to a very high degree of precision. As a single surface invariant reflector, the BMR's provide great accuracy, together with a constant optical path difference. This is especially important because it allows accurate distance measurement without the need to account for refraction, a common problem when using solid, prism type retroreflectors.
Compact and Digital Non-contact Temperature Measurements
The range of temperature sensor modules has been expanded by our partner, Dexter Research Center. One can choose between a 3V and 5V operating voltage and a 70° or 35° field of view. Infrared TSMs require an isothermal environment. The integrated thermistor corrects a slow drift of the surrounding temperature. Due to the compact design of the TO-5 housing and its integrated signal processing, all sensors in this series absorb temperature shocks well. This reaction has been further improved in the MD-0005 and MD-0007 series through an additional blind infrared element (datasheet: Gradient/Compensated).
Ultra-high Performance Amplifiers for OEM Systems
LASER COMPONENTS are pleased to introduce FEMTO's new LCA-Mini series current amplifier range, specifically designed for the OEM market as a bi-spoke, ultra-compact and high-performance off-the-shelf unit. The unit can be optimised for your application with factory set bandwidth, gain, input connector and other ways; the unit is flexible.
Single Photon Counting Module for Short Wavelengths
The COUNTblue series achieves a quantum efficiency of 60% in the blue spectral range, which has never been done before. Significantly higher than modules from other manufacturers, our COUNT products typically achieve a quantum efficiency of 70% in the yellow and green wavelengths.
Hard Coated Steep Edge laser Line Longpass Filters
LASER COMPONENTS can now offer a range of hard coated laser line long pass filters that not only offer a very steep edge but also a high transmission of >90% with deep OD6 blocking.
Laser Diode Modules - New FLEXPOINT Nomenclature
In response to the increasing choice of FLEXPOINT laser diode modules, the company has changed the part code nomenclature for the dot and line lasers. Our standard dot laser modules include 8 different wavelengths, between 1 and 100mW output power choices, optional power adjustment with either a potentiometer or an control extra wire, circular or elliptical beams, fixed focus, focusable or collimated beam, and a range of addition optics, such as housing size, supply voltage and more.
High Quality Optics Available On Demand
LASER COMPONENTS is known for its high specification custom optical coatings, producing high quality demanding coatings for individual needs. With the most popular coatings the company offers a very fast delivery, whilst still maintaining batch to batch quality and high specifications.
LSC-035 – Operation of Blue, Red, and NIR Laser Diodes
The inexpensive LSC-035 driver was developed for N type cw laser diodes with a maximum operating current of 300mA. The wide-ranging supply voltage of up to 15V allows the operation of blue, red, and NIR laser diodes. A protective circuit shields the laser diodes from damage resulting from ESD, high temperatures, and current peaks. It safely filters out the transient characteristics of the supply voltage.
The Ultra Stable Hard Mounted Hollow Retroreflector (USHM)
The Ultra Stable Hard Mounted Hollow Retroreflector (USHM) is a self-compensating mirror that is totally insensitive to position and movement, such as tilt and rotation. Parallel incident light falling on the USHM will be reflected back with great accuracy regardless of the USHM's physical orientation.
New Tunable Laser Source
The new ModBoxTTX from Photline Technologies is a benchtop tunable laser source designed for laboratory and production use. The ModBoxTTX offers a 1MHz resolution over 40nm of wavelength tunability in either the A band, the C band or the L band. It delivers a comfortable 13.5dBm (optional 15.5dBm) output power of highly pure (100kHz linewidth) light from a polarisation maintaining output fibre.
