Kikusui's PCR500M, PCR1000M and the PCR2000M are flexible high quality, compact, Variable Frequency AC Power Supplies with advanced testing-support features such as waveform-amplifier option plus 380V DC capability, weighing only 6kg-15kg.

DS2000's breakthrough design, right from its low-noise analogue front-end, means these new mainstream Digital Oscilloscope succeed in more applications with powerful trigger functions and analysis capabilities. Packing a 2GSa/s sample rate and up to 56Mpts optional memory depth, DS2000 is capable of small signal tests requiring low-noise, plus exacting linearity for large-signals, equipping engineers to capture lengthy signal-streams whilst retai...

From £895, ground-breaking RIGOL products continue with the DSA815-TG and DSA815 1.5GHz spectrum analysers. Essential GHz measurement is now much more affordable, using digital IF technology to guarantee its reliability and performance to meet the most demanding RF applications, further extending the reputable RIGOL Spectrum Analyser series.

Forget about resistors for power supply and battery testing use an Electronic Load. Telonic discusses the benefits of an electronic load in this latest video.

Telonic have introduced to the UK market the Kikusui KPM1000 Power Meter, it was designed primarily for measuring the standby power of consumer and commercial products. The KPM1000 accurately measures low level single phase standby power and higher power levels too. Over the past few years, each region of the world has been putting their effort in to establishing regulations related to efficient design such as ErP Directive in Europe, Energy Star...

Telonic Instruments have introduced a new range of Hipot (Flash) and Insulation Resistance testers manufactured by Japan based Kikusui. Designated the TOS5300 the three models in the range are designed for use in Withstanding Voltage and Insulation Resistance testing to help ensure the safety of Electrical / Electronic components / equipment.

Variable Frequency (40-500Hz) AC Power Supply 1-270V. For 50Hz 60Hz and 400Hz testing. www.telonic.co.uk

Telonic Instruments just released the Magna-Power Electronics MT Series V programmable high power dc power supply with a new, high power 250 kW module. This new fifth generation product now includes 65 models spread across independent 100 kW, 150 kW, and 250 kW modules, scalable into the megawatts through paralleling, with voltages from 16 Vdc to 4000 Vdc and currents from 24 Adc to 24000 Adc. The MT Series V features Magna-Power Electronics’ s...

The Kikusui DME1600 series of 6.5 digit professional Bench Multimeters are available in the U.K from Telonic Instruments Limited.

As Kikusui's UK Distributor since 1975, Telonic Instruments are pleased to announce the first showing at a UK exhibition of the new TOS5302 Hi-Pot Insulation Tester and the PFX Battery Test system from Kikusui's range of AC & DC programmable power supplies, dc electronic loads and electrical safety testers.

Magna-Power Electronics, a world leader in high-power programmable dc power supplies, continues its commitment to power density with the release of the XR Series II. The new rack-mount series introduces 8 kW models at just 2U (3.25”) high, further extending the series lead as the highest power programmable dc supply available in a 2U package size. In addition, the company has incorporated variable speed, load dependent fans as a standard featur...

Magna-Power Electronics Photovoltaic Power Profile Emulation (PPPE) software automatically calculates solar array voltage and current profiles based on user-defined parameters. These profiles can be sequentially sent to a Magna-Power Electronics' programmable power supply, which will emulate defined characteristics. The user can define a limitless number of profiles to be emulated and sequenced over a given time period.

Kikusui's PWR Series are automatic crossover DC constant voltage (CV)/constant current (CC) Power Supplies that enable users to combine a wide range of voltages and currents within the output power rating.

Kikusui's new PBZ Power Supplies enable polarity change without changing terminals. Just vary the output control to seamlessly pass through zero. Four quadrant operation allows the power supply to act either as a source or load.

Kikusui’s latest Fuel Cell impedance meter KFM2005 is designed for testing the fuel cell with low current (5 A or less), and not only the current-voltage characteristic test, the KFM2005 can easily measure the impedance of a fuel cell using the AC impedance method, and the Cole-Cole plot.

Kikusui’s new fuel cell impedance meter KFM2030 is intended to enable the impedance characteristics of a fuel cell to be measured easily through the use of the AC impedance measurement method.

The TS Series comprises a broad line of high-density rack-mount, DC programmable switching power supplies ranging from 5kW to 45kW. The series features over 100 models with output voltages ranging from 5 to 4000V DC and currents ranging from 1.2 to 2700A.

Telonic Instruments, Magna-Power Electronics U.K Distributor has unveiled the XR Series, the highest power density 2U programmable DC power supply in the industry. With 54 models, power ratings at 2 kW, 4 kW, and 6 kW, voltage ratings up to 1000 Vdc and current ratings up to 375 Adc, these fully controllable power supplies continue the company’s innovation in power electronics. Utilizing an additional power processing stage to deliver Magna-Pow...

Kikusui’s DC Electronic Loads prove to be a popular choice for fuel cell and low voltage power supply testing. Kikusui currently have a choice of two Electronic Loads that are equipped to sink current at zero volts. The PlZ164WA Bench type DC Load and the PLZ70UA modular electronic load.

Kikusui's PIA4850 USB Power Supply Controller enables sequence control and data logging on Kikusui PAS and PWR Power Supplies using Kikusui's Wavy Sequence Creation Software, Excel (Visual Basic), or Labview. The PIA4850 is USB 2.0 compatible and can be used with Windows Vista/XP/2000. It operates from Bus power so needs no AC connection. It allows readback of output values and monitors status.