Saelig Company Inc
- 1160-D2 Pittsford-Victor Road
Pittsford
NY 14534
United States of America - +001(585) 385-1750
- http://www.saelig.com
- +001 (585) 385-1768
Saelig Company Inc Articles
Raspberry Pi controller adapted for industrial use
Saelig has introduced the ComfilePi - an industrial Raspberry Pi-based touch-panel PC. Leveraging the compact, ubiquitous Raspberry Pi 3 board, the ComfilePi inherits the Raspberry Pi 3's 1.2GHz 64-bit quad-core ARM Cortex-A53 processor, a Broadcom VideoCore IV GPU, and 1GB of RAM.
Programmable DC supplies feature variety of test applications
Saelig Company has introduced the PSU-HV series of single output programmable switching DC power supplies that can provide up to 15A current and cover a power range up to 1,560W. These high efficiency, high power density 1U-height supplies include five models from 100-600V output.
Solar technology operates with indoor lighting
Saelig has announced the introduction of the patented Sol Chip Pak (SCP-R2801) power modules, which offer day/night non-stop functionality by combining solar cells, a rechargeable battery, and advanced power management circuitry. These power modules include all the components that are required to harvest energy from ambient light, charge a built-in rechargeable battery, and deliver a stable voltage to a load.
Low-cost VNA boasts dynamic range of 118dB at 10Hz
Pico Technology’s PicoVNA 106 Low-Cost Vector Network Analyser - an economical USB-controlled, professional-grade 300kHz to 6GHz Vector Network Analyser (VNA) with excellent performance, portability, and affordability is available at Saelig. Despite its small size and low cost, its full-function, minimal-error, 'Quad RX' four-receiver architecture supports both 8- and 12-term calibration without the uncorrectable switching errors, delays, a...
Comb generators test radiated noise
Two TekBox TBCGx Comb Generators for EMC testing are now available at Saelig. The TBCG1 is a radiating comb generator with an internal dipole antenna and a base frequency of 100MHz. It radiates a comb spectrum that is characterised up to 6GHz. The comb generator is intended as a quick reference for testing radiated noise measurements in anechoic chambers, TEM/GTEM cells, shielded chambers, or to gauge the effectiveness of cable shielding and othe...
Isolated oscilloscope designed to measure high voltage
An isolated high common-mode rejection ratio (CMRR) four-channel 200MHz 14-bit oscilloscope has been introduced by Saelig, the Cleverscope CS448. It has been designed to measure high voltage, fast slew-rate signals such as those in a full or three-phase power electronic switching bridge (e.g. gate drives to measure voltage and charge, power switching to measure loss and parasitic stress, output signals to measure power and spectrum for EMC compli...
USB TYpe C protocol analyser cuts time to market
Availability of the Mercury T2C USB 2.0 & Power Delivery Protocol Analyser that offers USB Type-C connection has been announced by Saelig. The Mercury T2C is a small and affordable hardware-based USB protocol analyser. It combines the de-facto standard CATC Trace display, comprehensive USB class decoding, and PD 2.0 protocol analysis.
DC electronic loads offer advanced programmability
The DL3000 Series 200W/350W Programmable DC Electronic Loads from Rigol are available at Saelig. The single output 150V 40A/60A units have a user-friendly interface and are useful for simulating a variety of load conditions for both equipment and components. A 4.3in. colour TFT LCD clearly shows multiple instrument parameters and conditions simultaneously.
1GHz, 10GSa/s oscilloscope boasts touchscreen
Availability of the Teledyne LeCroy WaveSurfer 510 oscilloscope has been announced by Saelig. The instrument combines advanced 1GHz, 10GSa/s specifications including MAUI with OneTouch user interface, powerful waveform processing, as well as advanced math, measurement, and debug features, to create an engineering tool that can help quickly analyse and find the root cause of circuit problems.
Digital multimeter suits high-precision, automatic measurements
The Siglent SDM3065X - an economical 6½ digit dual-display digital multimeter that is suited to high-precision, multifunction, and automation measurement applications is on sale at Saelig. It combines basic high-accuracy measurement functions, with multiple math and display choices, and special features including histogram, trend chart, bar chart, statistics, hold measurement and dBm.
Phosphor technology enhances 200MHz digital oscilloscope
The Siglent SDS1202X-E 200MHz Digital Oscilloscope which offers improved Super Phosphor Technology at an affordable price is now available at Saelig. With a real-time sampling rate of 1GSa/s, this new 200MHz scope features waveform capture rates of up to 100,000wfms/s in normal mode and 400,000wfms/s in sequence mode.
USB oscilloscope offers four differential input channels
The PicoScope 4444 High-resolution Differential Oscilloscope from Pico Technology which features four true differential input channels and a range of accessories for measurements from millivolt to 1000 V CAT III applications is available at Saelig. It has been designed specifically for making accurate voltage waveform measurements on circuits that are not ground-referenced, avoiding the dangers of equipment damage due to short circuits.
Raspberry Pi-based controller uses Raspbian OS
Saelig announces the availability of the emPC-A/RPI3 Industrial Controller based on the ubiquitous Raspberry Pi 3. It includes many extra features that expand the usefulness of the Raspberry Pi computer for industrial applications, such as a CANbus interface. An enhanced version of the tried-and-tested emPC-A/RPI2, the emPC-A/RPI3 has been designed especially for automation and control applications.
5½ digit bench/portable multimeters have USB
Saelig has announced the 1908 and 1908P Digital Multimeters (DMMs) - high accuracy, high resolution dual-measurement benchtop instruments with USB and other optional interfaces. Additional features include frequency, capacitance, and temperature measurements, as well as a wide range of math and data logging functions. Unlike most high performance bench multimeters, these DMMs include internal rechargeable batteries for 'use anywhere' versatility.
Isolated USB to RS232/485 converter cables
Saelig introduces the USB-232-K and USB-485-K, isolated USB to serial converter cables that are ideal for computers which do not have a serial port, or where an extra serial port is required. The USB-232-K is an isolated USB-to-RS232 converter, while the USB-485-K is an isolated USB-to-RS422 /485 converter.
High precision DC voltages offer operational modes
The PSU-series of single output programmable switching DC power supplies that can provide up to 200A current and cover a power range up to 1520W has been announced by Saelig Company. These high efficiency, high power density supplies include five models from 6 to 60V rated voltages. The PSU-series can be connected in series for increased power capacity: up to two units in series or up to four in parallel to cover a broad coverage of applications.
Signal generators offer multiple modulation functions
The Siglent SDG1000X Series of Function/Arbitrary Waveform Generators which output sine, square, ramp, and pulse waveforms to 60MHz with a 14-bit sampling rate of 150MSa/s at up to +/-20V has been introduced by Saelig. The generators feature Siglent's patented EasyPulse technology for low jitter and very fast rising and falling edges that are frequency-independent even at low duty cycle settings.
Pulse generator architecture cuts down on jitter
The TGP3100 series of true pulse generators from Aim-TTi can generate precision pulses from 1mHz up to 50MHz with pulse width and delay resolutions of 100 psec. They are on sale at Saelig. Single and dual channel models are available, both featuring large graphic LCDs for simultaneous text and waveform information.
3.2GHz spectrum analyser meets demanding RF applications
A new entry in the stable of the Rigol DSA800 spectrum analyser Series has been announced by Saelig. The DSA832E is a high performance, economical, and compact 9kHz to 3.2GHz instrument. A tracking generator function is available with the "-TG" model. The digital IF circuitry guarantees reliability and performance that meets the most demanding RF applications.
USB board charges multiple devices
A Universal USB Charging Board which allows users to charge and/or sync up to 16 USB2.0 devices simultaneously at manufacturer-approved speeds and at up to 2.1A per port is on sale at Saelig. The Cambrionix U16S allows the charging of multiple device types simultaneously, irrespective of manufacturer, such as tablets, ChromeBooks, mobile phones, MP3 players, e-readers, 3D Glasses, etc.