Companies

Crystek Corporation

  • 12730 Commonwealth Drive Fort Myers
    Fl 33913
    United States of America
  • +1 239 561 3311
  • http://www.crystek.com
  • + 1-239-561-1025

Crystek Corporation Articles

Displaying 1 - 20 of 102
Frequency
29th April 2016
Oscillator enables ultra-low phase noise performance

Crystek continues to push the limits of ultra-low phase noise performance with the release of the CVPD-922 Family. This voltage controlled LVPECL oscillator outperforms other LVPECL phase noise oscillators. Close-in phase noise has been reduced to -85dBc/Hz at 10Hz offset while the noise floor is at -162dBc/Hz.

Passives
21st September 2015
Coaxial resonator oscillator operates from 2275 to 2290MHz

  Crystek's CVCO55CC-2275-2290 Coaxial Resonator Oscillator (CRO) operates from 2275 to 2290MHz with a control voltage range of 0.5-4.5V. This CRO features a typical phase noise of -115 dBc/Hz at 10 KHz offset and has excellent linearity. Output power is typically +4.5dBm.

Frequency Control
4th September 2015
LVPECL oscillator provides a -163dBc/Hz noise floor at 40MHz

Crystek Corporation has launched the CVPD-952, a ultra-low phase noise LVPECL oscillator providing a -163dBc/Hz noise floor at 40MHz. Compact and powerful, the CVPD-952 provides extremely low phase noise for an LVPECL oscillator, which translates to a typical phase jitter of 75fs (12kHz to 20MHz). The CVPD-952 offers a frequency range from 131 to 200MHz.

Frequency
28th August 2015
VCO with standby mode & low phase noise

Crystek has launched the CVHD-957, an ultra-low phase noise HCMOS VCO with standby mode, featuring an extremely low close-in phase noise of -90dBc/Hz 10Hz offset and a typical noise floor of -168dBc/Hz at 100kHz offset.

Boards/Backplanes
21st August 2015
Module designed using SAW resonator technology

Crystek Microwave announces the release of a 2.5GHZ Phase Locked Clock Source with internal reference, the CRFS75-2500. Crystek designed the module using proprietary circuitry and Surface Acoustic Wave (SAW) resonator technology to provide ultra-low jitter/phase noise performance with true SineWave output. The resulting source features -105dBc/Hz phase noise at 10KHz offset and a noise floor of -167dBc/Hz.

Frequency
14th August 2015
LVPECL clock oscillator offers -162dBc/Hz noise floor

Compact and powerful, the CCPD-575 ultra-low phase noise LVPECL oscillator, introduced by Crystek, provides a -162dBc/Hz noise floor. The CCPD-575 is claimed to have an industry leading phase noise for an LVPECL oscillator – at least 15dB lower phase noise than most LVPECL oscillators on the market today. Close-in phase noise is also excellent at -90dBc/Hz for the 100MHz variant.

Frequency
7th August 2015
Low phase noise VCXO provides -162dBc/Hz noise floor

Featuring close-in phase noise which has been reduced to -85dBc/Hz at 10Hz offset, Crystek has launched an ultra-low phase noise LVPECL VCXO providing a -162dBc/Hz noise floor. This overall ultra-low phase noise translates to a typical phase jitter of 85fs (12kHz to 20MHz). According to the manufacturer, the compact and powerful CVPD-922 provides the lowest phase noise for an LVPECL oscillator in the industry.

Frequency
31st July 2015
Low phase noise VCO has jitter of 0.5 per second

Crystek Corporation has launched the CVHD-952, an ultra-low phase noise HCMOS VCXO providing a -150 dBc/Hz noise floor. This overall ultra-low phase noise translates to a typical phase jitter of 0.5 per second (12kHz to 80MHz). Packaged in a 9x14mm SMD package, the CVHD-952 is available from 131 to 200MHz. Input supply voltage of 3.3VDC consuming 25mA of current is required.

Frequency Control
24th July 2015
VCO operates from 3420 to 3430MHz

  Operating from 3420 to 3430MHz with a control voltage range of 0.5-4.5V, the CVCO55CC-3420-3430 VCO has been released by Crystek. The device features a typical phase noise of -110dBc/Hz at 10KHz offset and has outstanding linearity.

Frequency Control
17th July 2015
VCO suits digital radio & satcomms applications

Crystek's CVCO55CC-3400-3400 VCO (Voltage Controlled Oscillator) operates at 3400MHz with a control voltage range of 0.3-4.9V. This VCO features a maximum phase noise of -112dBc/Hz at 10KHz offset and has excellent linearity. Output power is +7.0dBm max. Engineered and manufactured in the USA, the model CVCO55CC-3400-3400 is packaged in the industry-standard 12.7mm2 SMD package.

Frequency
10th July 2015
VCO operates from 271 to 310 MHz

  Crystek's CVCO55FL-0271-0310 VCO operates from 271 to 310MHz with a control voltage range of 0.5-4.5V. This VCO features a typical phase noise of -114dBc/Hz at 10KHz offset and has excellent linearity. Output power is typically +0dBm.

Frequency
3rd July 2015
VCO operates at 3650MHz with a control voltage of 0.5-4.5V

  Crystek's CVCO55CC-3650-3650 VCO operates at 3650MHz with a control voltage range of 0.5-4.5V. This VCO features a typical phase noise of -108dBc/Hz at 10kHz offset and has excellent linearity. Output power is typically +7dBm.

Frequency Control
21st May 2015
BNC low & high pass filters feature 50Ω connectors

Crystek has introduced a line of BNC Low Pass Filters(LPF) to its CLPFL series of LPF, as well as a BNC High Pass Filter (HPF) to its CHPFL line of HPF. Encased in a rugged BNC housing with 50Ω connectors, these filters are designed for test equipment and general lab use.

Mixed Signal/Analog
24th April 2015
VCO features a typical phase noise of -115dBc/Hz at 10KHz

  A VCO which operates at 3500MHz with a control voltage range of 0.3-4.9V has been introduced by Crystek. The CVCO55CCQ-3500-3500 features a typical phase noise of -115dBc/Hz at 10KHz offset and has outstanding linearity. Output power is typically +6dBm.

Frequency Control
7th April 2015
VCO's excellent linearity suits base stations & satcomms

Crystek has announced its CVCO55CC-3000-3000 VCO, which operates at 3000MHz with a control voltage range of 0.5-4.5V. With a typical phase noise of -110dBc/Hz at 10KHz offset, the VCO displays excellent linearity. Output power is typically +7.0dBm, input voltage is 8.0V, and typical current consumption is 35mA.

Frequency
20th January 2015
VCO operates across a 5685-5780MHz frequency range

  A VCO, which operates from 5685 to 5780MHz with a control voltage range of 0.3-4.7V, has been released by Crystek. Featuring a typical phase noise of -102dBc/Hz at 10KHz, the CVCO55CXT-5685-5780 provides outstanding linearity. Output power is typically +0dBm.

Frequency Control
12th January 2015
Linear VCO targets digital radio equipment

  A VCO, which operates at 1690MHz with a control voltage range of 0.3-4.7V, has been introduced by Crystek. Featuring a typical phase noise of -120dBc/Hz at 10KHz offset, the CVCO55CC-1690-1690 provides outstanding linearity. Output power is typically +2.5dBm.

Frequency
8th December 2014
Low phase noise VCO suits satcomms applications

Operating at 2500MHz with a control voltage range of 0.0-3.3V, Crystek's CVCO33CC-2500-2500 VCO features output power of +5dB/m, a typical phase noise of -110dBc/Hz at 10KHz offset and excellent linearity.

Frequency
1st December 2014
VCO features excellent linearity alongside low phase noise

Operating from 900 to 940MHz with a control voltage range of 0.2-2.0V, the CVCO33CL-0900-0940 VCO from Crystek features a typical phase noise of -104dBc/Hz at 10KHz offset and has excellent linearity. Output power is typically +3dBm. Engineered and manufactured in the USA, the model CVCO33CL-0900-0940 is packaged in the industry-standard 0.3x0.3" SMD package.

Frequency
18th November 2014
VCO features a typical phase noise of -124dBc/Hz

Operating from 805 to 815MHz with a control voltage range of 0.3 to 4.7V, the CVCO55CC-0805-0815 VCO has been released by Crystek. The device, which has an output power of -5dBm, features a typical phase noise of -124dBc/Hz at 10KHz offset and high linearity. Engineered and manufactured in the USA, the VCO is packaged in the industry-standard 0.5x0.5” SMD package.

First Previous Page 1 of 6 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier