High-performance box IPC with Intel QM57 chipset for installation in a control cabinet

4th April 2012
Posted By : ES Admin
High-performance box IPC with Intel QM57 chipset for installation in a control cabinet
DSM Computer's new Galaxy G4-QM57 control cabinet PC integrates the Intel Core i5-520M processor clocked with 2.4 GHz, and the Intel QM57 chipset. In addition to the standard version, a higher-performance model with the Intel Core i7-620M (2.66 GHz) and a lower-cost system with the Intel Celeron P4500 Dual Core CPU are available as options. The fast, standard 4 GB DDR3 RAM main memory (800/1066 MHz) can be expanded to a maximum capacity of 8 GB.
The robust Galaxy® G4-QM57 is designed specially for the harsh industrial environment. Thanks to its compact size of 149 x 260 x 280 mm, the computer can be installed flexibly in a control cabinet. To permit the fast access to all components, the drive bay and the connections are located on the front side of the industrial housing. Two 8-cm temperature-controlled system fans ensure the optimum ventilation of the housing, irrespective of the positioning of the control cabinet. The operating temperature range is 0° to +45° C.

To expand the system with short, commercially-available supplementary modules, e.g. for CAN bus and other fieldbus cards, or with customer-specific controller cards, the control cabinet PC provides three free PCI slots and one PCI Express™ x1 slot. As an option, four PCI slots can also be implemented. The 3.5-inch drive bay is designed to accept a 160 GB, 3.5-inch SATA II 300 standard hard disk (or larger). The housing provides space for one 2.5-inch HDD or SSD (Solid State Drive). As an option, a 2.5-inch HDD, a Compact Flash or an SSD can be installed in the 3.5-inch drive bay instead of the HDD. The Galaxy® G4-QM57 also provides an internal mini-PCI Express™ x1 slot.

The control cabinet PC provides a wide range of interfaces, including ten USB 2.0 ports (eight external and two internal), a serial RS232 port, HD audio and two fast GigaBit LAN interfaces. On request, Wireless LAN 802.11b/g/n can also be supported. As an option, four serial ports (three of which are on the slot plate) can be implemented. VGA, DVI-I and DVI-D with a maximum resolution of 2560 x 1600 pixels are available as graphic interfaces.

A built-in 180 W power pack with 100 – 240 V input voltage or optionally a 24 VDC power pack with 200 W rating supplies power to the box IPC. The control cabinet PC is installed in a solid, high-quality industrial housing that, on request, can be supplied in any color requested by the customer, even with the company logo.

You must be logged in to comment

Write a comment

No comments



Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

SPS IPC Drives 2016
22nd November 2016
Germany Nürnberg Messe
electronica 2016
8th November 2016
Germany Messe München
European Microwave Week 2016
3rd October 2016
United Kingdom ExCel London
1st Executive Infrared Imaging Forum : From Niche to Large Vol...
8th September 2016
China Shenzhen Convention & Exhibition Center