Cables/Connecting

Pintail IP68 circular plastic connectors from In2Connect

11th March 2009
ES Admin
0
The Pintail range provides low-cost, weather tight standard interconnection for industrial and marine applications: an indoor/outdoor interconnect system that offers the performance and reliability of MIL threaded connectors at the cost of a commercial (COTS) product. The SP13 (panel mounting hole size 13mm) and SP21 (21mm) Series of multi-pin, threaded coupling connectors are able to withstand the requirements of IP68 when mated and will work reliably indoors, outdoors and in harsh UV and hostile wet environments. They are widely used for safe control and power connections between equipment where IP68 is critical, e.g. in instrumentation, process control, industrial machinery, automotive, marine and other applications like outdoor lights, LED lights and LED display walls, outdoor security cameras, etc.
The IP standard describes a system for classifying the degrees of protection provided by the enclosures of electrical equipment. Developed by the European Committee for Electrotechnical Standardization (CENELEC), these standards are designed to numerically rate an electrical product on the level of protection its enclosure provides. IP68 connectors must allow no ingress of dust with complete protection against contact. They must also prevent ingress of water in harmful quantity when immersed long term under defined conditions of pressure and time (up to 1 m of submersion).

Using a combination of dual O ring sealing, high temperature PPS inserts, grommets and compression nuts, all insulator and contact areas in these connectors are fully sealed against environmental elements. The dual “O” rings mean that the integral backshell can be easily removed to allow accurate soldering of the incoming cable. Connector end caps are available to suit and IP68 integrity is achieved when male and female connectors are mated or when the IP68 end cap replaces a mating connector.

The screw machined brass, solder terminations on the SP21 range are plated gold over nickel in cable free plug, in-line cable receptacle and jam nut panel mounting receptacle options all of which can be used in applications where moisture, high humidity, water or dust could be a problem. The model SP2113 has the same outer size and installation size as our WA22 socket, and is front panel mounting (hole size 22mm), elliptical 2 hole fixing compatible with Amphenol C16-1 and Binder 693 type receptacle panel cut-outs, but rated IP68. Plug and receptacle housings are keyed to ensure correct polarisation and tactile feedback when mating. Unlike many competitors’ products all the Pintail SP13/21 connectors have the option of male or female contacts in any body shell; plus the ability to join cables with cable-end plug and in-line receptacle models.

Constructed of glass filled nylon, flammability rated V-0 shells with 260 degrees C inserts these connectors have very stable dielectric and insulating properties plus they provide good mechanical properties at their design temperatures of -40 to 85 degrees C. They are RoHS compliant, CE approved, small, lightweight and extremely cost-effective when compared to their metal counterparts ~ without compromising the integrity of the interconnection.

Pintail connectors are designed for at least 500 mating cycles and can accommodate cable diameters from 3 to 12mm.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier