Cables/Connecting

Displaying 261 - 2803 of 2543

USB Type-C controller supports multiple platforms

The FUSB300C programmable USB Type-C controller from Fairchild Semiconductor is now available at Mouser Electronics. This thin client solution detects attachment and orientation to USB Type-C devices with software flexibility that provides support for multiple platforms. The controller is a generic hardware solution for designers looking to implement a DRP/DFP/UFP connector with the USB Type-C specification.
18th June 2015

UTS MPO accepts MPO connectors from 12 to 48 optical fibres

UTS MPO accepts MPO connectors from 12 to 48 optical fibres
An innovative solution that accepts all MPO connectors from 12 to 48 optical fibres has been introduced by SOURIAU. The UTS MPO is particularly suited for the railway, automation, and security markets that make use of fibre optics for greater efficiency and that demand quicker data transmission at a higher rate.
18th June 2015

Screw connection is made from polyamide

The Euro-Top X3 HI cable gland first attracted attention at the end of last year at SPS IPC Drives in Nuremberg, the international trade fair for electrical automation, systems and components. This product from RST Rabe-System-Technik und Vertriebs is the first Ex screw connection made from polyamide approved according to EN 60079-0:2012 for all sizes (M12 to M63), including the 7J impact resistance test.
17th June 2015


Ethernet connectors cope with harsh environments

Ethernet connectors cope with harsh environments
Three series of Category 6 Ethernet connectors from Amphenol are now available in Europe through TTI. The Socapex RJ Field Cat 6 interconnects feature a fast data rate of 1Gb/s under 250MHz and are available in three different series. They are designed for Ethernet networks in harsh environments and provide shock and vibration protection, plus sealing against dust and fluid ingress to IP68.
15th June 2015

Switch disconnectors are easier to install & maintain

Switch disconnectors are easier to install & maintain
  Switchtec’s redesigned NT enclosed switch disconnectors offer improved performance at a more competitive price. The disconnectors are now offered in larger enclosures, making it easier for users to terminate stiff cables at the unit’s connection terminals. 
15th June 2015

Optical terminations target military commercial use

Optical terminations target military commercial use
Mil-PRF-29504 qualified optical terminal products for either Mil-C-38999 or ARINC 600/404 connector systems developed by XiOPtics Optical Solutions are available from sole UK distributor, Astute Electronics. The Mil-T-29504 /4 and /5 termini are available as fully qualified DLA/DSCC listed QPL Mil-T-29504 termini and as lower cost COTS (commercial) versions for Mil-DTL-38999 connectors.
11th June 2015

GCT launches cable assembly division

GCT launches cable assembly division
Due to growing demand for its customer specific cable assemblies, GCT has recently announced the creation of a dedicated cable assembly division. Targeted at providing volume OEMs with guaranteed quality, value and superior service, the range includes overmold, IDC, wire harnesses and cable looms.
10th June 2015

Harwin showcase Mil-Aero connectors at Paris Air Show

Harwin showcase Mil-Aero connectors at Paris Air Show
Exhibiting on Stand FG176 in Hall 2B at the Paris Air Show, Le Bourget, 15th to 21st June, Harwin will demonstrate its Mil-Aero connectors and Datamate, Gecko and M300 high-reliability connector systems which withstand the severe shock, vibration and temperature conditions experienced in satellites, commercial and military aircraft, UAVs and spacecraft.
10th June 2015

X-Dry blocks moisture transmission in connectors

X-Dry blocks moisture transmission in connectors
A waterproof connector with X-Dry technology, the Techno TH392, has been introduced by Hylec-APL. All cables are hydroscopic to some degree and will therefore absorb moisture that can collect inside the cable sheath, moving along its length and even crossing terminations in the cable. The X-Dry technology blocks moisture transmission across terminals, protecting electrical and electronic equipment.
10th June 2015

EMI shielded D-Sub connector is Space qualified

EMI shielded D-Sub connector is Space qualified
A rugged high speed addition to Smiths Connectors’ D-Sub Series has been introduced. This line of high-impedance connectors is offered with 150ohm Quadrax contacts. It has been designed to ground the outer shield Quadrax directly to the shell of the connector, providing minimal RF noise, a compelling differentiator amongst D-Sub offerings.  
9th June 2015


Cables/Connecting documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

 

WEBENCH® Designer