Cables/Connecting

Displaying 221 - 2283 of 2063

Belden sets standards at SPS IPC Drives 2013

Belden sets standards at SPS IPC Drives 2013
Belden is presenting new products and services at SPS IPC Drives (hall 10, booth 120). As well as enhancing the productivity of systems and machines, these innovations – such as the new railway-approved Cat 7 Ethernet data cable – can also be used to implement additional applications. Innovations from the Hirschmann product range at the fair include a new version of the Industrial HiVision network management software, the OpenOCTOPUS online configurator, and HiLCOS 8.8 WLAN firmware.
10th October 2013

Using HUBER+SUHNER’s MBX RF Board to Board Connectors Described in Series of Tutorials

HUBER+SUHNER has published the first in a series of short tutorials describing the key features of its industry leading MBX miniature board-to-board and board- to-module RF connectors. The three tutorials, published on HUBER+SUHNER’s YouTube channel, illustrate how the MBX connector system works, the self-aligning features behind these blind mate connectors and understanding the difference between the connecting range and the radial working range.  
9th October 2013

Amphenol introduces rugged new underwater connectors

Amphenol introduces rugged new underwater connectors
Amphenol has today announced that it now offers a line of high performance, rugged and reliable underwater electrical connectors for deep submersion applications. The Submariner series of subsurface wet- and dry-mate connectors can be used in depths up to 6,000 meters (underwater pressure of up to 600 bar).
9th October 2013


Schurter introduces IP54 rated IEC appliance inlets

Schurter introduces IP54 rated IEC appliance inlets
SCHURTER has announced two appliance inlets in splash-water proofed versions. The appliance inlet 6100-3 with a sealing kit has a protection degree of IP 54, both into the equipment and to the cord connector. The 5707 power entry module with line filter offers IP 65 protection into the equipment as a standard feature. With the optional sealing kit, the coupling to the cable connector is additionally protected to IP 54.
9th October 2013

Extend transmission paths in 10 Gb/s network cabling

Extend transmission paths in 10 Gb/s network cabling
The new HARTING Ha-VIS preLink Extender permits the easy extension of transmission paths in 10 Gbit/s network cabling systems, as well as allowing unused cables to be reactivated and extended until the next required connection. 
9th October 2013

Rugged high performance shielded Cat 6A cables

Rugged high performance shielded Cat 6A cables
Belden has introduced a range of rugged high performance shielded Cat 6A cables for use in studios or in tactical field deployable audio/data installations. Designed as the ultimate field deployable product, these exceptionally robust cables can be used in the harshest of environments, yet deliver reliable performance for maximum uptime.
8th October 2013

Overmolded RJ45 Connector With Metal Housing In IP69K

Overmolded RJ45 Connector With Metal Housing In IP69K
The new Y-ConCover-40-O (O stands for Overmold) is an RJ45 hybrid connector consisting of a metal protective housing with additional overmolding that achieves outstanding sealing characteristics. It is based on the Yamaichi Electronics "Hermetic Sealed" technology, which was developed a few years ago for extremely reliable photovoltaic connection systems. The product lifetime of these products is designed to be 25 years.  
4th October 2013

Weald circular connectors meet MIL-C-26482 Series 1

Weald circular connectors meet MIL-C-26482 Series 1
Weald Electronics have today announced that the LMH series of bayonet coupling, multi-contact circular power connectors meet the requirements of MIL-C-26482 Series 1 and Patt 105 as well as IECQ-CECC spec BS/CECC 75201-003 and BS 9522 F0017.
1st October 2013

GTK announces Zero Insertion Force connectors

GTK announces Zero Insertion Force connectors
GTK UK announced the launch of its new extensive range of ZIF connectors for FFC and FPC cable on 0.5mm or 1.0mm pitch. This connector range is ideal for use when connecting displays to PCBs and can also be used as an alternative to traditional ribbon cable connectors for connection between boards where PCB space is at a premium.
1st October 2013

AVX unveil two new wire-to-board closed box contacts

AVX unveil two new wire-to-board closed box contacts
AVX has announced the completion of its innovative 70-9296 Series wire-to-board, dual beam, closed box contacts. The full series offering of 4mm, 3mm, and 2mm single poke home contacts now accommodates solid or stranded wires ranging from 12-28AWG with current ratings up to 20A, facilitating increased design flexibility and enabling simple, reliable, and solderless wire termination in an even broader range of industrial and solid-state lighting applications.
1st October 2013


Cables/Connecting documents


Network Headlines

The source for EOL devices

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

 

WEBENCH® Designer