Cables/Connecting

Displaying 181 - 190 of 2640

Autoclavable mass flow meters cover all medical uses

Autoclavable mass flow meters cover all medical uses
The Swiss sensor manufacturer Sensirion has expanded its SFM3xxx platform for flow measurement in medical applications. For the first time, the flow sensor range now includes autoclavable mass flow meters. Thus, the five products in the platform now offer the right solution for all gas flow measurement applications in medical technology.
24th November 2015

M12 panel feed-through features cable for Gigabit Ethernet

M12 panel feed-through features cable for Gigabit Ethernet
HARTING has expanded its har-speed range of industrial connectors with an X-coded M12 panel feed-through that is supplied complete with a length of cable allowing it to be integrated directly into Gigabit Ethernet systems. The feed-through arrives at the customer fully assembled and ready to install and can be put into operation immediately.
23rd November 2015

High definition BNC connector optimised for high frequencies

High definition BNC connector optimised for high frequencies
With the transition to 4K or even 8K-signals the impedance of BNC connectors became more important than ever. Every deviate impedance has a negative influence on return loss and VSWR (Voltage Standing Wave Ratio) which are both important measurements for reflected signals in a transmission line. Especially on high data rates up to 24Gb/s, as they occur when transmitting ultra high definition (UHD) signals, an impedance mismatch results in high return loss and thus bit errors are raising.
23rd November 2015


Wire-to-board connectors feature locking mechanism

Wire-to-board connectors feature locking mechanism
The XNI Series wire-to-board, 2.5mm (.098”) pitch, crimp style connectors, recently introduced by JST Corporation, Waukegan, Illinois, offer high reliability and provide stable contact performance under high vibration conditions. The headers and housings incorporate polarisation, keying (physical and colour) and secure locking features.
20th November 2015

In-house production capabilities extended

In-house production capabilities extended
Single-mode cables and polarisation maintaining fibres have now been included in the in-house production facility of LASER COMPONENTS. The standard cables are equipped with FC/PC or FC/APC connectors and can be produced for the standard telecom wavelength at 1,550nm to a wavelength of 450nm. Other connector types are available upon request.
20th November 2015

USB Type C connector supports scalable power charging

USB Type C connector supports scalable power charging
The USB Type-C receptacle from TE Connectivity (TE) is now in stock at Mouser Electronics. This new mid-mount connector provides data, power, and audio/video connectivity and transmission in a single solution. The receptacle is fully compliant with USB Type-C specifications and is designed to be small enough for handheld devices yet robust enough for industrial applications.
18th November 2015

Plug-and-play solution to power data centre designs

Plug-and-play solution to power data centre designs
A new power interconnect cable assembly has been launched by TE Connectivity (TE). The assembly is aimed at Open Rack V2, a new connectivity solution designed to power Open Compute Project (OCP) version 2-compliant data centre infrastructure. The OCP is developing standard compute, storage and data centre hardware designs that manufacturers can use to build highly compatible and scalable products with minimal development costs. 
18th November 2015

Field assembled M12 D-Code plug for Ethernet IP applications

Field assembled M12 D-Code plug for Ethernet IP applications
To further fulfill the requirements of device level connectivity in industrial applications and environments, METZ CONNECT now offers the M12 Cat. 5 plug with D-coding and is designed for assembly in the field. The 4 pole D-Coded M12 plug from METZ CONNECT has been developed especially for Industrial Ethernet applications that require a robust and reliable connection.
17th November 2015

Waterproof coaxial cable assemblies offer protection to IP67 & IP68

Waterproof coaxial cable assemblies offer protection to IP67 & IP68
GradConn has recently announced the release of a range of Nautilus panel mounted waterproof coaxial cable assemblies which offer IP67 & IP68 protection from moisture and particle ingress mated and unmated. Working in conjunction with customers, GradConn developed a range of waterproof interface connectors with internal seal and O-Ring, which prevents ingress thru the inner contact and thru the panel. 
17th November 2015

Introductory kit for implementing RFID solutions

Introductory kit for implementing RFID solutions
Helping new users understand the ease and flexibility of configuring RFID solutions, a new development kit from Harting enables users to configure their own applications, as well as familiarise themselves with the functionality and terminology used.
16th November 2015


Cables/Connecting documents


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

 

WEBENCH® Designer