Cyntech's solar PV module junction box reduces inventory through simple, flexible customisation

27th September 2011
Posted By : ES Admin
Cyntech's solar PV module junction box reduces inventory through simple, flexible customisation
Cyntech Components, announces a universal junction box for silicon-wafer solar PV modules that can be quickly customised to suit each application. It comes with three surface-mounted bypass diodes as standard but up to six can be installed. There is a choice of soldered or crimpled contacts, and the boxes can accommodate standard ribbon cables or non-ribbon crossing cables. This easy customisation means that only one type of box has to be stocked to meet the requirements of a variety of applications
Sealed with a Gore-Tex membrane, the IP67-rated box measures 111mm x 140mm x 26.5mm and accommodates between 2 and 8 ribbons with a maximum diameter of 7.5mm. The conductor cross-section can be 4mm or 6mm. Depending upon configuration, overall current rating is 20A and the junction box is rated at 1000 V DC to TÜV EN50521.

You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

SENSOR+TEST 2017
30th May 2017
Germany Nuremberg
Future Surface Fleet 2017
6th June 2017
United Kingdom Portsmouth
Electronic Warfare Europe 2017
6th June 2017
United Kingdom Olympia, London
Automechanika Birmingham 2017
6th June 2017
United Kingdom NEC, Birmingham
Close Air Support 2017
7th June 2017
United Kingdom London