Boards/Backplanes

EATX motherboard for intensive embedded applications

19th March 2014
DFI
Jacqueline Regnier
0

DFI has announced an EATX form factor motherboard, the RL830-C602/C604, with the Intel C602J/C604 chipset. The board supports dual Intel Xeon E5-2600 v2 processors, which are based on 22nm process technology providing higher intelligent performance with more cost-effective and energy-efficient power consumption than previous generations.

The RL830-C602/C604 EATX embedded motherboard offers a cost saving solution through better manageability and improved security which enables you to better manage and secure your computers with client isolation, network filtering, security agents and anti-virus protection. These features make it a suitable EATX platform for driving innovations in variety of intensive embedded applications such as medical, machine vision, transportation, and factory automation.

Increased memory capacity supported by DDR3 DRAM technology for x4, x8, and x16 devices is provided with 16 DDR3 DIMM sockets with four memory channels per processor delivering the maximum performance up to 512GB at 800/1066/1333/1600MHz low voltage memory storage for faster communication between components. In addition, the server-grade platform also supports ECC Memory providing improved data integrity and system reliability through automatic data correction.

The RL830-C602/C604 EATX motherboard offers higher performance and power with improved I/O controllers for the state of lowest-available power on workload requirements. The eight USB 2.0 ports are made up of four external USB 2.0 ports, one header for two external USB 2.0 ports, one embedded USB connector for eUSB SSD and one vertical Type A USB 2.0 port for securing USB flash drive, allowing the system to process a higher data load.

The RL830-C602 offers six Serial ATA ports: two SATA 3.0 ports with data transfer rate up to 6Gb/s and four SATA 2.0 ports with data transfer rate up to 3Gb/s. The RL830-C604 provides 10 Serial ATA ports, including two SATA 3.0 ports and eight SATA 2.0 ports. The integrated Advanced Host Controller Interface controller supports RAID 0/1/5/10. Four PCIe x16 interfaces (PCIe 3.0, for high graphics displays) and two PCIe x8 interfaces (PCIe 3.0) are available on the RL830-C602/C604 platform for the additional expansion design in order to provide customers’ various demands.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier