Analysis

Video drivers from Intersil

2nd October 2008
ES Admin
0
Intersil has introduced two 200MHz single supply video drivers, the ISL59833 and ISL59837, each equipped with charge pumps that create negative voltage and remove the need for external negative rails.
The ISL59833 and ISL59837 video drivers deliver true single supply operation of video amplifiers using a single +3.3V power supply. Charge pumps on board each device creates a negative voltage of -1.6V from the +3.3V power supply, eliminating the need for external negative rails and the components required for a negative power supply.



Both drivers handle video signals with black level at ground and the sync pulse below ground, enabling significant reductions in board space and total component cost. They are ideal for systems that require output swing below ground but lack a negative power supply, such as single supply consumer applications like projectors and video conference equipment.



The video drivers provide 200MHz -3dB bandwidth and 50MHz 0.1dB bandwidth with a fixed gain of 2 output buffer. Both devices have an enable pin to power down the op amps, reducing the current to 60mA. The ISL59837 also has a power down feature for the charge-pump, further reducing the current to less than 1mA. DC-accurate output coupling eliminates the need for large output AC coupling capacitors.



Generating the negative voltage internally allows for DC-accurate coupling of video onto a 75 ohms double-terminated line. The buffers have an integrated 6dB of compensation, so there is no need for external gain-setting resistors. An external reference voltage can be applied to the REF pin to shift the analogue video level down, which enables designers to adjust DC levels of the signal or remove a DAC.



The ISL59833 and ISL59837 are available now in 16-ld QSOPs.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier