|
Search
|
Wireless and Portable
Power management IC simplifies battery powered portable device designsBy bringing together a battery charger, a low-noise 300mA buck converter to power the baseband core, five LDOs for all critical digital, analogue, transmit and receive functions, and an I2C interface to control voltages dynamically, AnalogicTech's AAT2601 allows designers of portable battery powered devices, including those targeted at the Chinese market, to optimise performance, reduce footprint and drive down cost. 
QuickLogic samples platform for handheld applicationsEngineering samples of QuickLogic's latest customer specific standard product (CSSP) platform for the connectivity, intelligence, and logic requirements of handheld applications are now available. Based on QuickLogic's patented ViaLink technology, PolarPro II offers ultra low power consumption combined with small-footprint packages. A very low power (VLP) mode freezes system operation, during which the static current drops to less than 5 microamps. Entry and exit from the VLP mode are as fast as 10 microseconds, allowing systems to conserve energy by shutting down in between bursts of activity. 
Wireless Module is 50% Smaller and Lower in Cost says LPRSLPRS has announced the introduction of the latest radio module from Circuit Design Inc. The new MU-2-R embedded radio module operates at 434MHz and brings together industrial quality and reliability while having dimensions of just 50x30x9mm it's only 55% the size of the existing MU-1-R. Internet Radio and iPod docking platformFrontier Silicon has announced the latest addition to its range of solutions for Wi-Fi Radio with iPod connectivity. The Jupiter 6.1 platform provides a low-cost, fully-qualified reference design for connected home audio systems, with a wealth of features including extended iPod compatibility and an enhanced graphical user interface. 
Audio Solution For Leisure Market Two-Way RadioCML Microcircuits has announced the CMX138, a comprehensive audio processor designed primarily for the growing market of analogue 'leisure' two-way radio products (FRS, MURS, PMR446 and GMRS). Highly integrated by design, the CMX138 offers high performance and low-power consumption, extending end-product battery life to the maximum. 
RF Solutions delivers its millionth radio-transmitter key fobThe RF Solutions key fob was first designed to withstand a journey on the handlebars of a Triumph Bonneville motorcycle travelling at up to 90mph for 8 hours in the pouring rain. The concept has proved a tremendous success story as the company celebrates the delivery of its millionth radio-transmitting key fob. 
Silicon Labs Expands FM Receiver PortfolioSilicon Laboratories has announced the expansion of its broadcast audio portfolio to include four new FM receivers. The new additions include full-featured devices with embedded antenna support to enable FM radio reception without an external wired headset and the industry's smallest devices for space-constrained applications. Leveraging Silicon Labs' proven RF technology, the new FM receivers make it easy to add FM functionality to an array of applications from low-cost handsets and MP3 players, where small size and low power are imperative, to stand-alone FM radios, PCs, PDAs, smart phones and USB FM receivers. 
Narrowband VHF Multichannel TransceiverIncorporating automatic noise squelch and a 1200 baud modem, the TR1M 128-channel 12.5kHz / 25kHz Narrow Band FM transceiver module is the latest release from Radiometrix. 
Lime Microsystems achieves first success for single chip multi-standard transceiverFollowing the successful launch of its 2-4 GHz MicroTCA transceiver platform at Mobile World Congress in Barcelona, Lime Microsystems has achieved a single chip multi-band multi-standard reconfigurable transceiver IC. The first test chips back from the foundry have been tested and meet the original requirement for a highly frequency agile transceiver IC, operating from 375MHz to 4GHz. Sending and receiving data has been demonstrated successfully in each of the vital frequency bands required for WiMAX, 3G and LTE operation, paving the way for the adoption of Lime's multi-standard transceiver architecture in small cell base stations. 
TI claims first single chip to integrate GPS, Bluetooth and FM technologyAddressing increasing consumer demand for GPS, Bluetooth wireless technology and FM radio in mobile handsets, Texas Instruments has announced its NaviLink 6.0 (NL5500) solution, said to be the industry's first single chip that combines assisted global positioning satellite (A-GPS), Bluetooth 2.1 and ultra low power technologies, as well as FM receive/transmit capabilities. APC-Hero introduces radio module with precise indoor and outdoor ranging capabilitiesAdvanced Power Components has announced that Nanotron's 2.4 GHz CSS smart nanoLOC AVR module is available now, exclusively through their APC-Hero division. The smart nanoLOC AVR RF module is the first IEEE802.15.4a CSS radio module with precise indoor and outdoor ranging capabilities. Working at a range of up to one kilometre, the module is also unique in allowing data transmission between modules at a speed of 2MB/second. 
Rugged licence-free modem has range of up to 4kmThe new RF Solutions 'Typhoon' RF modem provides fast and reliable wireless data communications at an exceptionally competitive price. Supplied in a tough IP68 rated ABS enclosure with an RS232 cable and an 868MHz Ľ wave whip antenna, the 'Typhoon' modem requires only a 9 to 12VDC (1A maximum) power supply. 
Battery authentication ICs for cell phones provide low-cost, highly-effective device securityIntersil has introduced advanced and flexible battery authentication ICs for cell phones, featuring the company's FlexiHash technology. The ISL9206 and ISL9206A are cost-competitive battery authentication ICs that incorporate Intersil's FlexiHash+ engine. It provides very high levels of security using a basic challenge/response scheme based on 32-bit challenge code and 8-bit response code. 
2.7GHz, 60dB Mean-Squared RF Detector Responds in 500nsA new wide dynamic range mean-squared RF detector from Linear Technology sets a new level of accuracy and speed performance. The LT5570 provides accurate RMS (Root-Mean-Squared) power measurement of a 40MHz to 2.7GHz AC signal over 60dB dynamic range, even with a modulation crest-factor of up to 12dB. It offers best-in-class measurement accuracy of ±0.5dB over its full dynamic range and over a temperature range of -40°C to +85°C. Moreover, the device allows exceptionally fast response with a full-scale rise time of 500ns. 
Staccato Delivers Certified Wireless USB Native Device Development KitStaccato Communications today announced the availability of the Ripcord1 Development Kit (DVK). Staccato's Ripcord1 DVK is a completely integrated development environment that accelerates native Wireless USB device designs based on the Ripcord1 family of single-chip, all-CMOS Certified Wireless USB solutions. 
UWB Internal Planar Antennas Offer High Gain and Low ProfileFocus EDL has announced an ultra-wide band (UWB) family of high-gain, low-profile, internal planar antennas for high-speed, short-range data communication equipment. Produced by Pulse, these UWB antennas are available in sizes that are optimized for applications currently using the UWB spectrum and create opportunities for new applications in the UWB spectrum. 
RFID reader’s built-in personalities ease integrationWireless and communications specialist TDC has added to its portfolio of RFID solutions, with the introduction of a module that is rich in features, yet simple to integrate. The SkyeModule M4 provides state-of-the-art security standards and a host of features normally found only in much higher-priced readers. Integration is simplified by the three alternative firmware personalities, which ready the module for distinct application requirements; in product authentication, contactless payment and access control. 
ZigBee single chip with integrated voice codecAPC-Hero, the specialist product management division of UK electronics distributor Advanced Power Components, has announced a new voice-enabled ZigBee single chip, the RadioPulse MG2450. This new wireless sensor has a range of industrial and commercial applications including lighting controls, heating and ventilation controls, wireless headset/earpiece, low-power door intercoms, intelligent remote controllers, etc. A SIM card module (Z-SIM) based on the MG2455, is also available, and is the first and only product of its type in the current market, enabling various mobile applications with voice communication support. 
TI linear regulator said to cut MSP430 standby power consumption in halfTexas Instruments has introduced 150-mA, low-dropout linear regulators (LDOs) with dual-level voltage output for MSP430 microcontroller-based, battery-powered devices. Consuming the lowest quiescent current in the industry at 500-nanoAmps, the LDO's voltage select (VSET) pin gives designers the ability to switch between two voltage levels to customize and cut power consumption in half during operation. 
IDT's Optimized CPRI Solution Addresses Rapidly Evolving Wireless MarketIDT has announced a new family of common public radio interface (CPRI )-based functional interconnect chip (FIC) solutions that bridge adjacent standards within the wireless infrastructure. These FIC solutions are the first such devices optimized to allow the common CPRI standard to span the interface between the wireless radio card and a Serial RapidIO-enabled base band processing system. Narrow Band Multi-Channel Radio ModuleRadiometrix has introduced a new addition to its widely applicable, low cost LMT2/LMR2 transmitter/receiver series. Making use of the 458.525-459.1MHz UK frequency band (instead of the 433.875-434.650MHz EU band utilised in the previous versions), these higher power radio modules manage to increase the distance over which they can communicate to as much as 1km. This allows engineers to enhance systems that previously had insufficient range (or insufficient link margin). 
EasyRadio's LPRS unveils matching AntennasLPRS, manufacturer of Europe's most popular wireless modules - EasyRadio, also offers a wide range of matching antennas to complete a communications system. Straight and right-angle designs are available covering the 433MHz, 868-900MHz and 2.4GHz frequency ranges. As a March offer, LPRS provides a free antenna with every ER900TRS-02 ordered on line. On top of this they offer a free delivery on all orders over Ł50 from the 1st of March until the 31st of March. Order now at www.lprs.co.uk
EasyRadio's LPRS unveils matching AntennasLPRS, manufacturer of Europe's most popular wireless modules - EasyRadio, also offers a wide range of matching antennas to complete a communications system. Straight and right-angle designs are available covering the 433MHz, 868-900MHz and 2.4GHz frequency ranges. As a March offer, LPRS provides a free antenna with every ER900TRS-02 ordered on line. On top of this they offer a free delivery on all orders over Ł50 from the 1st of March until the 31st of March. Order now at www.lprs.co.uk 2.4 GHz RF transceiver for ZigBee/IEEE 802.15.4 and low-power wireless applicationsTexas Instruments has introduced the company's second-generation ZigBee/IEEE 802.15.4 radio-frequency (RF) transceiver designed for the 2.4 GHz unlicensed ISM (industrial, scientific, medical) frequency band. Featuring state-of-the-art selectivity/co-existence and excellent link budget, the CC2520 targets a wide variety of ZigBee/IEEE 802.15.4 and proprietary wireless systems used in industrial monitoring and control, home and building automation, set-top boxes, remote controls and wireless sensor networks. 
Vibration Resistant ISM Radio ModuleAimed at applications where RF engineers need to consider the interference effects of nearby vibrating machinery, Radiometrix has developed the HVR2 receiver. The HVR2 radio receiver module (a high vibration resistant version of the Radiometrix RLC2) utilises the company's proprietary hybrid Direct Digital Synthesizer (DDS) local oscillator design to make it almost totally immune to mechanical vibrations at frequencies below 500Hz. When used in conjunction with the matching TLC2H-433-5 transmitter module it can provide users with a reliable 5kbit/s wireless data link suitable for even the most troublesome of industrial environments. End-to-End RapidIO-enabled MicroTCA Baseband Development PlatformTundra Semiconductor Corporation has announced the availability of the market's first end-to-end RapidIO-enabled MicroTCA platform for wireless baseband. The platform, offers end-to-end 10 Gigabit RapidIO Interconnect for chip-to-chip and board-to-board links across the backplane. Ultracompact 2G/3G Dual-Mode RF Transceiver IC for Mobile Phones and 3G Communication Cards for PCsRenesas Technology has announced the R2A60281LG, an ultra-compact 2G/3G dual-mode radio frequency (RF) transceiver IC that supports both 2G and 3G modes used in cellular communications. The device integrates in a single chip most of the high-frequency signal processing functions required by mobile phone handsets. Sample shipments will begin in March 2008 in Japan. 
Integrated RF Front End In Super Small PackageAdmiral Microwaves has introduced an integrated RF Front End Module designed for 802.11b/g wireless local area network (WLAN) applications in the frequency range from 2.4 to 2.5GHz. Manufactured by US company, RF Arrays, the RWF111 consists of an integrated power amplifier, switch and low noise amplifier. 
UHF transceiver increases battery life in wireless applicationsClaiming the industry's lowest receiver (RX) current consumption (<3mA), which significantly increases battery life in wireless applications, the new SX1211 UHF transceiver from Solid State Supplies is optimised for designs in the unlicensed industrial, scientific and medical (ISM) frequency bands (868-870 MHz and 902-928 MHz). 
STM's Nomadik Application Processor Integrates Innovative Graphics Technology for Mobile MultimediaSTMicroelectronics today announced first results of its collaboration with AMD on next-generation graphics for mobile multimedia. ST's newest mobile application processor, the Nomadik STn8820, integrates AMD's innovative graphics technology to enable visually rich 2D and 3D applications on mobile handsets. Live demonstrations of ST's Nomadik graphic capabilities will be presented at the Mobile World Congress 2008 in Barcelona. 
STMicroelectronics' Nomadik Chipset Boosts Multimedia Performance in Next-Generation Mobile ApplicationsSTMicroelectronics has introduced a chipset that couples STs new multimedia application processor with a companion audio and power-management chip. This powerful platform raises the bar in mobile multimedia, enabling smart phones and other portable devices to record and share high-definition video clips, receive mobile TV, playback days of hi-fi music and deliver a state-of-the-art 3D gaming experience. 
Mobile Phone Cameras Get Smaller and Smarter with New Imaging Single-Chip Sensor from STMicroelectronicsSTMicroelectronics has introduced what it says is the market's smallest single-chip camera sensor for mobile applications. Coupling low space requirements with advanced image processing capabilities, ST's latest 2-megapixel mobile-phone camera sensor addresses consumers' appetite for full-featured imaging solutions in ever-more popular thin-profiled handsets. 
STM Announces Availability of Multiple Software Platforms for Nomadik Application Processor to Drive Next Generation of Mobile Multimedia HandsetsSTMicroelectronics has announced multiple software platform availability and new hardware features of its STn8815 application processor, the third–generation product in the company's award-winning Nomadik family. The Nomadik processor is available to leading handset makers to develop the next-generation of mobile multimedia products with a choice of leading software platforms, including Symbian OS/S60, Linux, Windows Mobile and Windows Embedded CE. The STn8815 now also offers a wider range of packaging options, plus a boost in clock speed, up to 393MHz, of its ARM9 embedded microprocessor, equipped with a level 2 cached memory. RF Driver Amplifier Reduces Power, Size and Cost of WiMax And Wireless ApplicationsAnalog Devices has introdiced the ADL5321, a high-performance, low power RF driver amplifier that brings together the industry's best combination of power and performance in 2.3-GHz to 4.0-GHz wireless infrastructure designs for LTE, WiMAX and WiBro applications. The ADL5321 increases signal linearity, and consumes less power, relative to competing RF amplifiers. When implemented in a system, such as a base station, radio, or satellite equipment, the ADL5321 eliminates up to four external passive components, which eases design complexity and enables RF designers to more quickly bring cost-effective, highly-efficient wireless infrastructure equipment to market. ProVision to demonstrate real-time video over WiFi to mobile devices at GSMA Mobile World CongressProVision Communications has announced that its wireless video technology will be showcased as one of the demonstrations of leading-edge UK wireless capability hosted by UK Trade and Industry (UKTI) at the GSMA Mobile World Congress (formerly 3GSM World Congress). The ProVision system will be demonstrated on the UKTI stand AV26 throughout the show, which is being held in Barcelona on 11 – 14 February 2008. 
SST Targets Entry-Level Handsets with Low-Power ComboMemory SeriesSilicon Storage Technology has announced the 34WA Series of 1.8V ComboMemory products, the latest additions to the Company's family of high-performance flash memory/RAM combination memory products. The 34WA Series supports functions and features new to SST's ComboMemory family, including burst-mode operation for faster performance and address/data bus multiplexing for a lower pin count and smaller device footprint. The products in the 34WA Series use a very small semiconductor package, measuring just 6mm x 8mm x 1mm, making them the smallest address/data bus multiplex combination memory devices available on the market today. The performance and space savings provided by the 34WA Series make these products ideal for the entry-level mobile handset market's need for high-performing, cost-effective, small form factor mobile phones. 
Hall-effect switch features low power consumption for battery-operated applicationsThe new A1171 from Allegro MicroSystems Europe is an ultra-sensitive micropower Hall-effect switch with latched digital outputs and either unipolar or omnipolar actuation. It features operation at low supply currents and voltages, making it ideal for battery-operated applications in portable or handheld communications and computer equipment. Yageo partners customers to advance market position in wireless solutionsYageo Corporation has announced that it has entered into partnership with original equipment manufacturers and original design manufacturers to promote wireless solutions in Europe, backed by advanced ceramic technology. In addition to partnerships with OEMs and ODMs, Yageo will extend collaboration with key distributors, including Rutronik, TTI, Arrow, Avnet and Abacus, to strengthen the technical and design-in support available to customers for high-frequency antennas. The move is also expected to cover independent design centres in every European country. 
TI expands battery fuel guage familyTexas Instruments has introduced two new battery fuel gauge devices with integrated low-dropout regulators (LDOs) for smart phones, mobile Internet devices and media players with embedded or removable batteries. The new system-side and battery pack-side fuel gauges build on TI's popular family of integrated circuits (ICs) that predict battery life with 99-percent accuracy to extend run-time, protect data and provide a better user experience. 
NEC Electronics Launches “Medity 2” for 3G Mobile Phone HandsetsNEC Electronics announced the completion of the semiconductor platform solution Medity 2. Medity eases the development of mobile phones corresponding to the third and second generation communication standards HSDPA/W-CDMA and GSM/GPRS. Medity 2 consists of 5 components: (1) M2 which is an integrated chip with baseband processing functions and application processor, a semiconductor chipset that includes wireless frequency processing (RF) ICs and power ICs (2) software components such as communication software which can automatically switch between W-CDMA, GSM and middleware to control the application (3) software development evaluation board and kit (4) software development tools and (5) system integration services into the products. For the development of mobile phone handset equipment with longer standby times, the required features and functions from semiconductors to software as well as the integration of products can be obtained. This allows users to concentrate on their developmen 
STM Unveils its Next-Generation Integrated Bluetooth and FM-Radio Transceiver System on Chip in 65nm Process TechnologySTMicroelectronics has its 4th-generation Bluetooth/FM Radio combo solution, which meets the demanding integration and cost requirements of the cellular phone market. By combining Bluetooth wireless personal-area-network functionality with an FM radio transceiver in a single 65nm chip, the STLC2690 offers leading-edge integration and performance. 
Combined SIM/microSD connector shrinks multimedia handheldsJAE Europe has introduced a space-saving connector for handheld applications, which combines SIM and microSD cards within a compact footprint and total height of only 2.8mm. The ST5 series connector stacks the SIM card and the push/push microSD card vertically to reduce board-space requirements in cellular handsets featuring removable storage for music, images, or personal data. 
Brochure from Arrow is comprehensive resource for wireless control and M2M productsArrow has launched a brochure that will prove an invaluable resource for engineers involved in the development of wireless control and machine-to-machine (M2M) applications, including the addition of wireless functionality to existing designs. 
Directional couplers from Murata save PCB space in cellular phonesMurata Electronics Europe has introduced the LDC15 series of 0402 SMD chip multilayer hybrid couplers. These ultra-small low-profile directional couplers measure just 1.0 by 0.5 by 0.4 mm, saving PCB space in cellular phone and other handheld wireless applications. Based on Murata's own ceramic multilayer technology, members of the series are available in the frequency range 800 to 3000MHz. Simultaneous LCD and video output for handheld devices delivered by QuickLogic and ChrontelHandheld product developers can now add simultaneous video output without sacrificing battery lifetime or burdening the host application processor. The solution - developed by QuickLogic and Chrontel - has already been adopted by a leading smart phone manufacturer and may be customised easily to match a wide range of design needs required by other adopters. 
Broadband Modulator And Demodulator Enable Direct Conversion Cellular BasestationsADI is extending its RF portfolio with the industry's highest performance broadband direct conversion radio solution: the ADL5375 I-Q modulator and companion ADL5382 I-Q demodulator. With the industry's broadest operating frequency ranges, the ADL5375 and ADL5382 devices enable equipment designers to implement and standardise on solutions that address the wide range of operating frequency bands and standards, including GSM/EDGE, CDMA 2000, and W-CDMA, eliminating the need to select a modulator or demodulator for each cellular standard and operating band. Jennic launches JenNet stack for scalable wireless sensor networksJennic Ltd. has introduced JenNet, a new free proprietary wireless networking stack for its powerful range of 32 bit single chip wireless microcontrollers. Based on the IEEE802.15.4 standard, it is specially designed to be easy to use and is fully scalable from just a few nodes to large networks of up to 1,000 nodes. 
RF switch connector is World's smallest says MurataMurata has introduced what it says is the world's smallest Radio Frequency surface mount switch connector for wireless applications. The MM8130-2600RB8 measures only 2.5 by 2.5 by 1.4mm and is designed to reliably test microwave frequencies throughout a product's development stage up to final production. The small footprint is ideal for cellular phones, PDAs, GPS systems and measurement equipment. The SWF series is also an excellent fit for advanced devices such as Wireless Local Area Networks (WLAN), WiMax, Ultra Wide Band (UWB), Bluetooth and Zigbee technologies. RS increases wireless products with latest technologyWith the latest refresh of its Wireless Technology Solutions portfolio, RS Components (rswww.com), the leading distributor of electronic, electrical, electromechanical and industrial components is now able to offer customers the widest range of antennas currently available in the market. 
DVB-H External Antennas for Wireless Devices from Focus EDLLeading electronic components distributor, Focus EDL, announces a new high performance, small antenna designed for mobile devices. Designed by Pulse, the new W3520 external Digital Video Broadcast-Handheld (DVB-H) planar printed wire board (PWB) antenna is ultra-thin and compact, delivers high performance, and is fully tested and matched for easy installation into DVB devices to enable fast product development cycles and ramp-ups. 
Single-Chip Products from Staccato Earn Wireless USB CertificationStaccato Communications has announced that its Ripcord SC3500 is the first single-chip, all-CMOS product family to achieve Wireless USB certification from the USB Implementers Forum. Ensuring seamless interoperability with multiple vendors, Staccato's latest certification signifies the production readiness of the Ripcord SC3500 product family for peripheral devices and demonstrates Staccato's commitment to delivering standards-compliant products for volume markets. 
Secure Wireless Devices Platform is enhanced with Latest Protocols and Wireless ChipsetsGreen Hills Software, Inc. has announced that it has enhanced its Platform for Secure Wireless Devices with extended Wi-Fi security, Cisco Compatible Extensions (CCX), Wi-Fi Protected Setup (WPS), and new reference driver support for a number of industry-leading Wi-Fi chipsets targeting the embedded, low-power device markets. These new capabilities provide customers requiring Wi-Fi support in current and/or future products a rapid, low-risk path to satisfy wireless design requirements with a complete, proven, integrated solution. 
Ceiling-mount bi-directional antenna from AdmiralA compact, low profile, ceiling-mount bi-directional antenna, offering 4dBi of gain, and a VSWR of 1.5:1, is just launched by UK specialist distributor, Admiral Microwaves. Manufactured by the Cushcraft Corporation, the SQ2405DD12F, is the latest in a range of antennas now in stock, covering a wide range of commercial, industrial and military radio applications. 
Memory Card Interface from STMicroelectronics for Portable ApplicationsSTMicroelectronics has announced a highly-integrated chip which provides five essential functions required by memory card interfaces in mobile phones, GPS navigation devices, digital cameras and a broad range of other consumer and industrial products that use removable Secure Digital (SD) protocol cards. The new flip-chip EMIF06-SD02F3 memory-card transceiver integrates signal conditioning, bidirectional level shifting, ESD (electrostatic discharge) protection, EMI (electromagnetic interference) filtering, and a 2.9V voltage regulator. 
Sub-1 GHz RF System-on-Chip with Integrated USB Controller for Wireless Sensor NetworksTexas Instruments has introduced what it says is the the industry's first sub-1 GHz radio-frequency (RF) system-on-chip (SoC) with an integrated USB controller, enabling a fast and easy bridge between PCs and RF. The CC1111 combines the excellent performance of TI's state-of-the-art RF transceiver (CC1101) with an enhanced 8051 microcontroller (MCU), 8/16/32 kB of in-system programmable flash memory and a full-speed USB controller for improved low-power wireless sensor networking. 
Mobile, Wireless 3G solution from Trident and TDCTrident and TDC have joined forces to offer a dust, rain and splash resistant PC for harsh environments, powered by an energy efficient, VIA C7 1 GHz processor, with an IP65 rating and fanless operation. With on-chip encryption, SSE2 / SSE3 support, integrated hardware MPEG-2 decoding acceleration, the MMB Mobile fulfils all media needs. It offers an external wide input DC voltage range from 6V to 36V and many battery protection features. NEC and Skyley Announce Compliance of ZigBee PlatformNEC Electronics and Skyley Networks have announced that their jointly developed ZigBee platform has been deemed as a ZigBee Compliant platform by the ZigBee Alliance. The ZigBee compliant platform is based on an NEC Electronics' 78K0R 16-bit microcontroller, a wireless RF transceiver chip by Uniband Electronic Corporation (UBEC) and the ZigBee stack, which is a software to manage the network. By utilizing this convenient platform, OEMs and system developers can easily develop low power, wireless peer-to-peer mesh networks ideal for the rapidly growing field of industrial and residential building management systems, lighting controls, automated meters, sensors, and security systems which can be certified as a ZigBee product. 
Navigation Processor with Embedded GPSSTMicroelectronics has introduced its new automotive-grade application processor with embedded GPS for navigation and telematics. The Cartesio processor perfectly couples with ST's GPS RF chip (STA5620), creating a unique offering that significantly reduces the form factor and bill-of-materials with no compromise in performance. 
Bluetooth Module has open-field range of one kilometreTDC has launched a Bluetooth module with an open-field range of one kilometre from its internal antenna, the longest range of any Bluetooth module. The range can be further extended by adding high gain directional antenna. 
SH-Mobile Application Processors for Digital TV capable mobile phonesRenesas Technology Europe has announced two new microprocessors in the SH-Mobile series for application processing targeting digital TV capable mobile phones. The SH-MobileL3V2 and SH-MobileUL incorporate a high-performance, low-power multi-CODEC video processing IP from Renesas. Both devices support MPEG-4, MPEG-4 AVC (H.264) encoding & decoding and VC-1 decoding, achieving 30 fps (frame per second) performance at VGA definition. 
New ultra-compact, low power printer AP1310-DC provides the ideal solution for mobile applicationsAble Systems Limited has announced the availability of its new AP1310-DC portable mini-printer. The AP1310-DC is ideal for a wide range of mobile applications, having been specifically designed and approved to be powered directly from a vehicle battery, or any DC power source in the range 9 to 36V. 
Low-cost ZigBee antennas offer multiple configuration optionsCTi Ltd, the specialist antenna manufacturer, has launched two new series of low-cost ZigBee antennas which provide designers with a wide choice of configuration options. Both series of antennas are suitable for use with any IEEE 802.15.4 standard 2.4 GHz ZigBee wireless system, and can accommodate vertically and horizontally polarised signals. Typical ZigBee wireless applications include environmental monitoring and control in homes and buildings, and low-speed data acquisition from remote sensors in industrial process control systems. 
Avago Technologies Introduces New Smaller, High Performance WCDMA Band 1 DuplexerAvago Technologies today announced two ultra-small, WCDMA duplexers with industry-best performance levels. The company is a leading supplier of analog interface components for communications, industrial and consumer applications. Using new and improved FBAR (film bulk acoustic resonator) technology, Avago's miniaturized ACMD-7602/ACMD-7612 duplexers deliver best in class transmit and receive insertion loss for UMTS band 1 handsets, femtocells, and data terminals. 
Antennas from RF Solutions optimized for low power, short range telemetry, Wi-Fi and computer systemsRF Solutions has announced the availability of its new range of high quality 2.4Ghz antennas specifically designed and manufactured for operation with low power, short range telemetry systems, Wi-Fi and computer systems. The use of these antennas gives optimum range and reliability to a wide range of applications. RF Transceivers from Analog Devices for Mobile WiMAX ApplicationsAnalog Devices has introduced RF-to-digital baseband transceivers designed to enable the IEEE 802.16d/e mobile WiMAX standard for mobile communications devices, such as cell phones, personal digital assistants, and handheld multimedia devices. WiMAX terminals enable wireless broadband connectivity with dramatically lower installation costs than competitive wired solutions. As WiMAX evolves from a fixed-line protocol to one that increasingly serves portable communications applications, device makers are requiring smaller, more energy-efficient solutions that meet the cost, space and power budgets of mobile communications terminals. 
PMC-Sierra launches highly integrated WiMAX MIMO RF IC solutionsPMC-Sierra has introduced its first WiMAX RF IC solutions for Femtocell base stations, Customer Premises Equipment, and Mobile Station designs. The PM8800 WiZIRD 2Tx/2Rx is said to be the industry's most integrated WiMAX RF IC solution with full 2Tx/2Rx Multiple In/Multiple Out (MIMO) capability to support a maximum downlink data rate of 63Mbit/s per sector and a peak uplink data rate of 28Mbit/s per sector in a 10MHz channel. TI Introduces 2.4 GHz and Sub-1 GHz RF System-on-Chip Solutions for Low-Power Wireless ApplicationsTexas Instruments has introduced a pair of RF system-on-chip solutions designed for low-power and low-voltage wireless applications used in the 2.4 GHz and sub-1 GHz frequency bands. The CC2510 and CC1110 combine TI's state-of-the-art RF transceivers (CC2500 and CC1101) with an industry-standard enhanced 8051 microcontroller, 8/16/32 kB of in-system programmable flash memory, 1/2/4 kB of RAM and many other powerful features – all inside a small 6-mm x 6-mm QLP-36 package. Texas Instruments Celebrates Five Years of Wireless Single-Chip InnovationIn five years, Texas Instruments Incorporated has launched more than a dozen wireless single-chip solutions, ranging from the world's first single-chip cell phone modem to multi-radio connectivity devices, and continues to shape and define the rapidly changing wireless landscape. Increasingly, handset manufacturers require highly integrated, scalable solutions that address a multitude of consumer requirements around the globe. TI initially addressed this need five years ago with another industry first – a single-chip Bluetooth solution (the BRF6100) based on the company's innovative DRP technology, delivering a small and affordable solution that accelerated penetration of Bluetooth in wireless phones. 
Micro-power, dual operational amplifier extends battery life and accuracy of portable devicesThe AD8506 low-power CMOS dual operational amplifier with rail-to-rail inputs and output is designed for portable applications, including battery-powered patient monitors, remote sensors, handheld instrumentation and other mobile equipment that require precision measurement at low voltage levels with minimal power consumption. Featuring a novel circuit architecture, the AD8506 maintains high linearity by minimizing distortion through its power supplies and its inputs. Its 105-dB PSR minimizes errors caused by power supply voltage variations over a battery's lifetime, making the AD8506 ideal for battery powered applications. Furthermore, the AD8506 maintains 105-dB CMR, maximizing linearity by minimizing the common-mode induced distortion often found in amplifiers having rail-to-rail inputs. While maintaining high linearity, the AD8506 consumes only 20 µA of supply current per amplifier—35 percent less than other operational amplifiers in its class. 
Development of low-power wireless systems made easier by TITexas Instruments has announced a tool for designing embedded systems that combines ultra-low-power MSP430 microcontrollers with wireless communications. At the low cost of $49, TI's new eZ430-RF2500 development tool, packaged in a convenient USB stick form factor, offers two radio frequency -enabled microcontroller target boards and a PC debugging interface that may be used to develop stand-alone wireless projects. Developers will now find it easier than ever to build low-power wireless systems for sensing and metering, home security and automation, medical and other innovative applications. 
High performance transistors suit slimline portable applicationsZetex Semiconductors has added a pair of low voltage PNP transistors to its low saturation high current SOT23FF transistor range. With the footprint of the standard SOT23 package but with a reduced off board height of less than 1mm, the ZXTP25020CFF and ZXTP19020DFF will suit a range of slimline portable product designs. 
Rogers Corporation New RO4500(tm) High Frequency Circuit Laminates Enable Cost-Effective Antenna DesignsRogers Corporation announced today, its RO4500(tm) laminates, a new addition to Rogers' RO4000(r) product family of high performance antenna-grade materials. RO4500 glass reinforced hydrocarbon/ceramic laminates provide the controlled dielectric constant, low loss and passive intermodulation (PIM) response required by the wireless infrastructure market. They are designed for high volume commercial antenna applications, including communications cellular base stations and Wi-MAX networks. Anglia signs up Telegesis for its ZigBee modulesAnglia has announced that it has signed a distribution agreement with Telegesis, which produces ZigBee modules based around both Ember and STMicroelectronics chips. The Telegesis modules are designed to meet the needs of engineers who need the functionality of ZigBee but lack the resources or expertise to develop chip level solutions, and of those requiring a fast track to market. 
RF620 Smart Radio modules provide simple low cost ‘plug and play’ solutionRF Solutions is announcing the immediate availability of its RF620 Smart Radio transmitter and receiver modules. These items provide low cost, reliable wireless data communications within a range of up to 100 metres. The RF620 Smart Radio modules enable a simple 'plug & play' solution, providing a direct radio link for either a serial data stream (CMOS/TTL) or up to 2 remote control telemetry lines. 
ISM-Band RF Transceiver Platform Delivers Industry’s Lowest Power ReceiverSemtech Corp has announced the SX1211, a UHF radio frequency transceiver with the industry's lowest receiver (RX) current consumption (<3mA), significantly increasing battery life in wireless sensor network applications. The SX1211 is optimized for asynchronous sensor network designs in the unlicensed industrial, scientific and medical (ISM) frequency bands (868-870 MHz and 902-928 MHz) where low RX power consumption is critical to battery life as the receiver is constantly waking up to sniff for signals. HDMI transmitter simplifies portable HDMI product designAnalog Devices' ADV7520NK is a low-power HDMI v1.3 (High-Definition Multimedia Interface) transmitter for portable media and DVD players, video recorders, and other mobile multimedia devices capable of supporting high-definition audio and video content. The ADV7520NK is the first HDMI transmitter to incorporate a CEC (Consumer Electronic Control) buffer on-chip, which reduces component count, eases design complexity and speeds time to market for portable high-definition (HD) devices by eliminating the need for the design engineer to develop a separate CEC support channel. 
Rugged Convertible Notebook and Tablet PC with Intel Core Duo ProcessorKontron has announced the new fully rugged Kontron NotePAC Duo equipped with a flip-and-rotate display to instantly convert the notebook into a tablet PC. With the 1.2 GHz Intel Core Duo U2500 processor, Intel 945 GMS chipset and up to 2GB DDR-RAM, the dual-core and dual-use convertible rugged PC, Kontron NotePAC Duo, offers outstanding mobile performance and an operation time of up to nine hours with only one lightweight battery pack. Sub 1GHz RF Transceiver for Low-Power Wireless ApplicationsTexas Instruments has introduced a sub-1GHz RF transceiver featuring low-power consumption, high integration and excellent RF performance. The CC1101 targets low-power wireless applications in alarm and security, automatic meter reading, industrial monitoring and control, and home and building automation. The CC1101 is an improved performance, code-compatible version of TI's successful CC1100 sub-1GHz RF transceiver. 
CMOS RF Transceiver simplifies 3G radio designAnalog Devices has announced the latest addition to its award-winning family of Othello direct conversion radios and its broad TD-SCDMA product portfolio, the Othello-3T AD6552. Expanding on the company's legacy as a leading provider of solutions for TD-SCDMA wireless handsets, the Othello-3T AD6552 is ADI's second-generation radio designed specifically for the 3G TD-SCDMA standard and complements all of the company's TD-SCDMA baseband chipsets, including SoftFone-LCR and SoftFone-LCR+. 
Low-cost embedded GPS antennasCTi Ltd has launched a series of low-cost GPS antennas for embedded applications. Available in five different sizes, from 12mm square to 25mm square, the new PA series of ceramic patch antennas provide electronics designers and system integrators with an inexpensive, ready-made solution for GPS satellite signal acquisition. All five antennas offer a choice of standard 4mm or ultra low 2mm profiles, and can also be supplied as a module with a built-in low noise amplifier and SAW filter for ease of integration and reduced product development times. Intended primarily for use in portable telematics systems, the antennas are also ideal for a wide range of embedded GPS applications, including handheld devices, asset tracking, fleet management, vehicle tracking and marine navigation. 
PIC Microcontroller ‘Toothpick’ and DARC combination: immediate standalone operation and reliabilityRF Solutions has announced the availability of its Toothpick 2.0 transceiver, a module combining a PIC microcontroller and LinkMatik (Bluetooth 2.0) radio which is preloaded with Toothpick Services firmware, providing FlexiPanel user interface server, wireless field programming and Toothpick Slave for optional external host control. 
Video filter extends battery life and lowers system cost for handheld devicesIntersil has introduced the ISL59118, a 9MHz, dual-channel, low-pass filter that eliminates video glitch noise associated with the use of video DACs. The device uses nearly 50% less bias current than previous generation devices and stands out as the industry's lowest power dual channel video filter and clamp. Video DACs can be found in many applications from set-top boxes to handheld devices, such as phones and MP3 players that play video. TI is Developing Ultra Low Power Bluetooth Products for Handsets and Other Portable DevicesTexas Instruments has announced that the company will leverage its expertise and leadership in ZigBee, low-power RF and mobile connectivity to develop leading products and solutions for Ultra Low Power (ULP) Bluetooth (previously known as Wibree). The recent merger between the Wibree Forum and the Bluetooth Special Interest Group (SIG) created ULP Bluetooth, the first open technology extending wireless connectivity between mobile devices or PCs and small, button cell battery human interface devices (HIDs), such as watches, wireless keyboards, toys and sports sensors. TI Expands Voice over IP Portfolio with addition to IP Phone Product SuiteTexas Instruments has announced its newest IP phone platform, enabling manufacturers to deliver cost effective IP phones for the low-end enterprise, small and medium business (SMB), and residential markets. This new addition to TI's IP phone product suite leverages the company's extensive experience in the Voice over IP (VoIP) industry and is powered by TI's digital signal processors (DSP), enabling real-time signal processing, low-power consumption and tremendous flexibility for next-generation VoIP devices. The TNETV2502 offers manufacturers a complete turnkey system for developing cost effective IP phones with up to a 50 percent reduction in the bill of materials (BOM). 
Location Detection SoC for ZigBee Wireless Sensor Networking is a first says TITexas Instruments has introduced the industry's first System-on-Chip (SoC) solution with a hardware location engine targeting low-power ZigBee/IEEE 802.15.4 wireless sensor networking applications. The CC2431, from the company's Chipcon product line, targets applications such as asset and equipment tracking, inventory control, patient monitoring, remote controls, security and commissioning networks. The device is supported by TI's leading ZigBee protocol stack, Z-StackT. 
RF CMOS antenna switch has highest throw-count says PeregrinePeregrine Semiconductor has announced the next generation of its UltraCMOS products at the MTT-S International Microwave Symposium in Honolulu, Hawaii. The new 0.5µm PE42693 SP9T RF antenna switch is the highest throw-count RF CMOS antenna switch available on the market today. To support more highly integrated and even smaller WCDMA solutions, Peregrine also announced that it has qualified its 0.25 µm UltraCMOS technology for three new SP9T switches: the wirebond PE42691 and the flip-chip PE42692 and PE42694 devices. 
4.3-inch WVGA and WQVGA displays save powerAnders Electronics has introduced a new 4.3-inch TFT LCD with WVGA resolution and two 4.3-inch displays with WQVGA resolution. All modules have a wide operating temperature range, delivering enhanced multimedia performance for mobile professional convergence devices. Applications include GPS receivers, security equipment, ultra-portable PCs and data acquisition systems. 
FBAR-based Quintplexer Brings Single Antenna, Simultaneous GPS and Voice to Mobile HandsetsAvago Technologies has announced a quintplexer module delivering what it says is superior global positioning system performance levels. The company is a leading supplier of analog interface components for communications, industrial and consumer applications. Avago's highly integrated and compact ACFM-7102 quintplexer delivers a significant improvement in insertion loss while delivering high GPS to cell band, and GPS to PCS band isolation.With a unique, switchless design to optimize performance, the FBAR-based ACFM-7102 provides designers with flexibility and simplicity when creating ultra-small, high-performance mobile phones that deliver simultaneous GPS functionality. Stereo Power Amp Chip Creates 3D Audio Effects for Mobile Phone PlatformsSTMicroelectronics has announced a compact audio power amplifier chip – intended for mobile phones and for other portable audio products – which creates 3D audio effects in the stereo speaker outputs to add impact and a surround-sound feel to MP3 and video files. The TS4997 can deliver 1.2W per channel of continuous average output power into 8-ohm loads, from a 5V supply — although it operates from supplies of as little as 2.7V — while its high-efficiency design and ultra-low standby power will help extend battery life. 
SoC solution for car navigation systemsRenesas Technology Europe today announced the SuperH family SH7775, an SoC solution designed for high-performance car information systems such as next-generation car navigation systems. Sample shipments will begin in July 2007. The SH7775 incorporates the SuperH family's top-end SH -4A CPU core and is capable of high processing performance of 1GIPS (giga floating-point operations per second) or more. It is a high-performance SoC product that integrates many comprehensive peripheral functions required by car navigation systems. 
New Multiband antenna has GSM and 3G coveredEAD is pleased to introduce the TBR2100, a GSM/3G 1/2 wave dipole with knuckle SMA-Male connector supporting 870-960/1710-2170 MHz. picoChip claims first with WiMAX Wave 2 and MIMO basestation reference designpicoChip has announced the next version of its industry-standard WiMAX basestation reference design, with a software upgrade to support Mobile WiMAX Wave 2 and MIMO. The new PC8532 WiMAX platform has its first public display at WiMAX World Europe this week (Booth Number 204). It is the only basestation reference design to support WiMAX Wave 2 and IO-MIMO, and scales from access point (femtocell) to sophisticated multi-sector carrier macrocells. The PC8532 is used for WiMAX certification and has already demonstrated the widest range of interoperability with third-party terminals. 
New generation handset from Quadrant ideal for all mobile radio applicationsQuadrant has introduced to the UK a new generation control handset from Peiker acustic GmbH that is designed for all analogue or digital mobile communication systems and can be customised to meet specific user requirements. Ideal for use in cars, trucks, buses and trains fitted with private mobile radio applications using GSM, GSM-R, Tetra, Tetrapol and Satphone radio standards, the new Peiker HA87 handset is also designed for use by the emergency services. MP3 Decoder Under 6 MHz is a first says TensilicaTensilica has announced that it has optimized the MP3 decoder for its Xtensa HiFi 2 Audio Engine and Diamond Standard 330HiFi processor core. This MP3 decoder now runs at the lowest power and is the most efficient in the industry says Tensilica, requiring just 5.7 MHz when running at 128Kbps, 44.1 KHz and dissipating 0.45 mW in TSMC's 65nm LP process (including memories). This makes Tensilica's Xtensa HiFi 2 Audio Engine ideal for adding MP3 playback to cellular phones, where current carrier requirements are for 100 hours of playback time on a battery charge, and increasing to 200 hours in the near future. 
USB 2.0 multiplexer reduces connectors and improves cradle functionality in portable devicesIntersil has introduced the ISL54200 USB 2.0 high/full speed multiplexer. With a wider supply voltage range, higher bandwidth and better insertion loss characteristics than the competition, the device provides the most flexible high performance solution for interfacing USB and non-USB portable devices. The flexibility of the ISL54200 comes from its ability to switch between data sources having different data speeds and signal levels, and to output them through a common connector. 
Synchronous Mobile Multimedia Interconnect is industry first says IDTIDT (Integrated Device Technology), has introduced what it says is the industry's first synchronous Mobile Multimedia Interconnect (M2I), fully-optimized for multimedia applications in high-end mobile handsets and personal digital assistant devices. A significant architectural advance over previous generation interfaces, the M2I performs up to six times faster with ninety percent less battery drain. High-end handset users can reliably playback multimedia of unsurpassed quality with minimal impact to their "talk time" and battery life. For handset suppliers, the sophisticated interface of the M2I enables the processor to support additional differentiating functionality such as Bluetooth, WiFi and global positioning systems (GPS) – a significant competitive advantage in mobile handsets. 
GPS antenna operates from 1.8 to 6 VdcCTi Ltd, the specialist antennae manufacturer, has launched an innovative active GPS antenna that operates from any voltage in the range 1.8 to 6 Vdc. Known as GPS-UNI, the new antenna is believed to be the first in the industry that is capable of operating from such a low voltage - most competitive products on the market require at least 3.3 V. The antenna is particularly suitable for automatic vehicle location and tracking applications; its very low voltage requirements mean that a vehicle can continue to find and report its location until its battery is virtually exhausted - significantly extending the time available to recover the vehicle in the event of it having been stolen. 
Jennic reduces pricing on ZigBee and IEEE 802.15.4 development kitsJennic has announced new and significantly reduced pricing on its ZigBee and IEEE 802.15.4 development kits. The new pricing is designed to lower barrier of entry in the ZigBee/IEEE 802.15.4 space and make it cost effective for OEMs to equip entire engineering teams with tools for wireless product development. The move comes after the distribution of over 1,000 kits since the rollout of the world's first single chip wireless microcontroller solution in this space in December 2004 and the release of a second generation chip, the JN513X series of products, this January. White paper describes solution for incorporating TV-out capability to handheld productsIt is predicted that over 40% of all smartphones will include 'TV-out' functionality by 2010, allowing devices to drive an external monitor, projector or TV. This application presents many design challenges in the areas of power management, device interoperability, and user interaction. QuickLogic has developed a flexible solution based on its unique low-power programmable technology, PolarPro, and published an explanatory white paper. The paper details a small-BOM design for a video subsystem with a device capable of X/Y swap and frame rate conversion. It consumes very little static and dynamic power and has the flexibility to interface to multiple application processors and TV-Out encoders. 
Implantable grade radio chip for in-body Communication systemsZarlink Semiconductor Inc. has introduced the ZL70101 transceiver chip, an ultra low-power RF system-on-a-chip solution for use in implanted medical devices, programmers, and monitoring base stations. Building on Zarlink's MICS technology platform, the ZL70101 transceiver chip delivers high data rates, low power consumption and unique wake-up circuitry. Using Zarlink's MICS technology, medical device manufacturers can design in-body communication systems that will improve patient care, lower healthcare costs, and support new monitoring, diagnostic and therapeutic applications. 
Development support for STMicroelectronics' integrated ZigBee devices from ArrowArrow has announced the availability of a comprehensive suite of evaluation, development and debug products for engineers planning to use STMicroelectronics' latest integrated ZigBee devices. The comprehensive support package will ease development, lower costs and speed time-to-market for low-bit-rate wireless networks based on the new STMicroelectronics SN250 system-on-chip ZigBee device or the SN260 ZigBee network processor. 
STMicroelectronics Extends its Secure MCU PortfolioSTMicroelectronics has introduced two secure microcontrollers designed specifically for high-volume 2.5G and 3G (third-generation) mobile-phone SIM cards. The ST21Y036 and ST21Y144 provide 36 Kbytes and 144 Kbytes of user EEPROM, respectively, and they join the ST21Y068, which was announced towards the end of 2006 and is already in volume production. Based on an enhanced 8/16-bit CPU core with up to 16-Mbytes linear addressing capability, the family is produced in a state-of-the-art 0.13-micron EEPROM technology to meet industry demands for high volumes, short lead times and competitive pricing. Wireless Audio Solution from SSTSST Communications, a developer of RF integrated circuits for a wide range of wireless and multimedia applications, and a subsidiary of SST (Silicon Storage Technology, Inc., today announced the MelodyWing SP advanced wireless audio solution. The MelodyWing SP advanced wireless audio solution offers uncompressed, wire-equivalent sound quality for home theater surround sound and multi-room audio broadcasting found in a growing number of home entertainment applications; including HDTVs, home theaters, set-top-boxes, headsets, game consoles, home gateways, multimedia PCs and audio streaming. The new solution enables each transmitter to wirelessly stream high-quality sound to two full-range speakers and a sub-woofer. MelodyWing SP Smart Channel automatically selects the un-congested industrial, scientific and medical (ISM) radio bands at both 2.4GHz and 5GHz, to avoid interference with other wireless equipment and realize pop-free sound effects. 
Dual 200-mA LDOs for Portable DesignsTexas Instruments has introduced a family of dual, 200-mA low-dropout linear regulators (LDOs) in a 2 mm x 2 mm SON package for portable, battery-powered equipment. The low-noise LDOs provide high power-supply rejection ratio (PSRR) over a wide frequency range of up to 10-MHz, fast 160-µs start-up time and excellent line and load transient response, while consuming a very low total 90-µA ground current with both LDOs enabled. 
Customisable ZigBee transceiver dongle with USB interfaceRF Solutions has introduced a USB interface ZigBee transceiver dongle. Housed in a compact, handy adapter enclosure the new UZBee 2.4GHz devices are able to communicate at speeds of up to 250 Kbps over distances of up to 120 metres. The UZBee can be used in wireless personal area network (WPAN) applications where there is a requirement for high data throughput but where duty cycles are low. The ZigBee protocol is ideal for enabling communication in home, business and industrial automation where control devices and sensors are commonly used. Jennic ZigBee and IEEE802.15.4 modules receive full FCC and ETSI approvalsJennic has announced that its modules based on the JN5139 wireless microcontroller family now comply with FCC and ETSI regulations in the USA and Europe, with certification now received from both regulatory authorities. 
Single-Chip Solution Drives GPS into Mainstream Mobile PhonesTexas Instruments has announced a new single-chip device that is expected to drive GPS applications into mainstream mobile phones. Built on TI's DRPT single-chip technology, the NaviLinkT 5.0 solution has a footprint of 25mm2, delivering high performance with the industry's smallest solution size and lowest bill of materials, making GPS more affordable to accelerate adoption in mobile phones. The new NaviLink 5.0 GPS receiver architecture provides fast time to first fix (TTFF) in weak signal conditions typical in metropolitan areas and deep indoor environments. With GPS available in more handsets, operators can broadly deploy location-based services consumers have come to expect, such as rich 3D mapping and navigation applications. 
Small S-Video drivers increase battery life and remove glitches in portable video applicationsHoused in tiny, ultra-slim μTQFN or chipscale packages, 9MHz low-pass reconstruction filters from Intersil remove quantization noise and switching glitches created by video DACs on an analogue output signal. The devices have integrated gain-of-two buffers and a summer that recombines the S-video signal to provide a composite video output for those applications where the DAC does not provide a composite video out. Coupled with their ultra-small packages and extremely low current consumption, the ISL59114/16 are ideal for portable applications and next-generation video appliances. The ISL59114/16's tiny 0.5μA power-down current increases the application's battery life when the amplifier is not in use, in addition to having an extremely low quiescent current during video operation. 
Supervisors with programmable voltage trip pointsIntersil's ISL88016 and ISL88017 supervisors offer pin-selectable voltage trip points along with popular functions such as power-on reset (POR) control, supply voltage supervision, and manual reset assertion in a small 6-pin TSOT package. Both supervisors are designed for low power consumption as well as high threshold accuracy and are especially suitable for portable and battery-powered applications. ISM Radio Modules Allow trouble-free implementation of wireless control functionsThere are certain user applications where very simple 'on/off' control functions are all that are needed. Common examples, such as long-range lighting controls, alarm sounders, or machine shutdown safety systems, will normally require a microprocessor or dedicated remote control IC in addition to the radio module itself. Having to include such chips will incur extra cost, expand the system size, and increase the software overhead. This is clearly something of an irritation for engineers looking at what appear to be rather basic wireless designs, and which really shouldn't need too much effort to implement. 
Integrated baseband processors enable multimedia functions in low-cost GSM/GPRS phonesAnalog Devices has announced two highly integrated baseband processors designed to enable multimedia functions in low-cost GSM/GPRS cellular phones. The new SoftFone AD6721 reduces the cost and component count of entry-level multimedia phones, and the SoftFone AD6722 adds an integrated image signal processor for cameras up to 3 Megapixels and direct camera interface to eliminate the need for a separate camera coprocessor. Together, the devices bring a wealth of multimedia functionality to low-cost handsets, including both improved image quality and better sound. 
CMOS RF transceiver is a complete solution for 3G mobile terminals based on W-CDMAAnalog Devices has unveiled the latest addition to its family of Othello(R) radios, the Othello-3. This CMOS RF transceiver provides a complete solution for 3G mobile terminals based on the W-CDMA air interface standard. Leveraging ADI's Othello direct-conversion architecture and an innovative low-noise transmitter, the Othello-3 (AD6551) transceiver eliminates the need for transmit-path surface acoustic wave (SAW) filters. In addition to simplifying the RF section in 3G mobile terminals, Othello-3 reduces board space by 40 percent over competing solutions – key drivers to delivering smaller, more cost-effective 3G handsets. Integrated RF Front-End Module for GSM/UMTS Band 1 HandsetsAvago Technologies has announced the industry's smallest integrated RF front-end module for UMTS Band 1 handsets. The company is a leading supplier of innovative semiconductor solutions for advanced communications, industrial and commercial applications. Avago's new AFEM-7780 module integrates the company's innovative FBAR (Film Bulk Acoustic Resonator)-based duplexer with its advanced CoolPAM power amplifier technology to provide users with industry leading battery life, superior signal reception and high performance. 
Single-chip FM radio transceiver familySilicon Laboratories Inc. has announced what it says is the first single-chip FM radio transceiver family. The digital architecture of the Si472x transceiver combines the functionality of the Si470x FM radio receiver with the Si471x FM radio transmitter in a single 3x3x0.55 mm package. Competing solutions require at least two chips, more than 50 external components and up to five times more board space. Big six to jointly develop platform for 3G mobile phone handsetsNTT DoCoMo, Inc., Renesas Technology Corp., Fujitsu Limited, Mitsubishi Electric Corporation, Sharp Corporation, and Sony Ericsson Mobile Communications, today announced that they plan to jointly develop a next-generation mobile phone platform1 for dual-mode handsets supporting HSDPA2/W-CDMA (3G) and GSM/GPRS/EDGE (2G). Development of the platform is targeted to complete during Q2, FY2008. Integrated 802.11n WLAN, Bluetooth 2.1 and FM Single Chip from TITexas Instruments has announced two new devices built on the company's leading DRPT single-chip technology designed to drive affordable WLAN, Bluetooth® and FM technologies into mass market handsets. The first product is WiLinkT 6.0, a single chip that is the latest member of TI's mobile WLAN (mWLAN) family, and is the industry's first device to integrate a complete offering of mobile WLAN, Bluetooth and FM, with support for IEEE draft 802.11n for better coverage and reception. 
2-megapixel camera subsystem from STMicroelectronics is aimed at high volume camera-phone marketSTMicroelectronics has announced a new 2-megapixel camera subsystem intended for the high-volume mainstream camera-phone market. The new VS6724 is the latest in ST's camera-on-chip family, joining the successful 1.3-megapixel VS6624 and VGA-resolution VS6524 modules. It combines a high-quality multi-element lens with a 1/4-inch CMOS sensor and on-chip processing, in a tiny industry-standard package, to deliver superb UXGA-resolution (1600 x 1200 pixels) images. Texas Instruments First to Launch ZigBeeT 2006-Compliant PlatformTexas Instruments has announced the industry's first ZigBee 2006-compliant platform. TI achieved compliance for its Z-Stack, the leading ZigBee solution on the market today, which is certified for the CC2420 transceiver and the CC2430 System-on-Chip (SoC). 
New 2.4 GHz antenna ideal for discrete wireless deploymentsEAD has today introduced the Z-Top antenna - a very low profile external 2.4 GHz antenna for applications where a discrete antenna solution is required. Texas Instruments OMAP™ 2 Platform Powers Latest NEC 3G FOMA® PhoneTexas Instruments Incorporated today announced that its OMAP™ 2 platform has been selected to provide compelling multimedia functionality for one of NTT DoCoMo's newest FOMA® 3G handsets, the FOMA N903i from NEC. Based on TI's OMAP2430 processor, this handset delivers a wide range of entertainment and productivity functions, packaging some of the most desirable multimedia applications into a single handset supporting DVD-quality video and best-in-class VGA color display. 
TDC Announces New EnOcean Trial PackTDC is delighted to announce its latest addition to its wireless control product portfolio - the Trial Pack 3 from EnOcean. The EnOcean Trial Pack 3 contains everything required to try out the EnOcean batteryless and wireless technology in an existing light fitting or mains operated device. The Trial Pack 3 contains a single rocker switch and an RCM250 mains receiver used to switch mains power. Jennic ships 1000th IEEE802.15.4 and ZigBee evaluation kitAs Jennic announces it has shipped 1000 of its IEEE802.15.4 and ZigBee wireless microcontroller evaluation kits, it says the company is seeing uptake in building and industrial automation as well as parking meters, AMR (automatic meter reading), street lighting, audio and other applications ZigBee large network evaluation productJennic has announced the commercial launch of the first large ZigBee network evaluation product. It allows customers to rapidly evaluate and deploy wireless sensor networks of 100 nodes or more in real-world industrial, office, and home environments. By combining wireless sensor nodes, software and network monitoring tools the evaluation product is ready to use out of the box. NI Releases LabVIEW Drivers for Wireless Sensor NetworksNational Instruments has announced LabVIEW drivers for wireless sensor networks, giving engineers and scientists working with these devices the ability to fully integrate their ZigBee, IEEE 802.15.4 or proprietary wireless sensors into the National Instruments LabVIEW graphical development environment. The free driver software works with sensors from three wireless-sensing leaders – Accsense, Accutech and Crossbow Technology – and includes communication functions and example programs compatible with sensors from each vendor. 
Single Channel Narrowband Radio ReceiverThe Radiometrix NRX1 is a VHF equivalent of the company's track-proven UHF NRX2 radio data receiver, but allows engineers to gain extra reach with their system designs. Its usable range exceeds the 10km mark, when a matching transmitter is employed. The modules come in standard frequencies of 151.3000, 169.4125, 173.2250 and 173.2500MHz, though other custom frequencies ranging from 120 to 180MHz are available to order. They can be used for licence exempt operation in the UK (set at 173MHz) and Europe (at 169MHz). They can also be offered in versions that cover the Australian/New Zealand licence free frequency of 151.300MHz. 
LPRS Radio Modules makes it Easy for Sports JudgesLow Power Radio Solutions' Easy Radio modules have been designed into a handheld device for marking competitors in sports such as swimming. Manufactured by Plymouth based MazingTree Design the Wireless JPAD (Judges Pad) System was originally developed for High Board Diving. The Amateur Swimming Association has now used the system for running all of their Diving events, from Club level right up to the top International level events in the UK. Recently the system was used at a the high profile GB Championships in Southampton where the system was used to Judge the Olympic Men's Gold Medallist, Tian Liang competing against the UK's own Bronze Medallist, Peter Waterfield and other International level Divers. 
Narrowband transceiver IC for operation in multiple frequency bands between 80 and 940MHzAnalog Devices has extended its portfolio of leading RF ICs with the ADF7021 narrowband transceiver IC. The ADF7021 is designed for operation in multiple frequency bands between 80 and 940MHz. Fully compliant with European ETSI-300-220, North American FCC Parts 15, 90, 95 and Japan ARIB STD-T67 regulatory standards, the ADF7021 achieves best-in class receiver sensitivity of -123 dBm at 1 kbps and includes on- chip T/R switch, VCO tank, RF/IF filters, fully automatic AFC and AGC. Because of its high receiver sensitivity, superior interference blocking, the ADF7021 is ideal for high reliability and maximum range applications such as wireless AMR (automatic meter reading), wireless home automation, industrial control and monitoring and remote security. Single-Chip ZigBee Solution with Bundled Software StackSTMicroelectronics has announced a single-chip ZigBee wireless networking solution – the SN250 – which integrates a 2.4GHz IEEE 802.15.4-compliant radio transceiver and a state-of-the-art 16-bit microprocessor with EmberZNet software stack. The power-efficient chip includes comprehensive, hardware-supported, network-level debugging features for easy application development. 
Mini Card Combining Bluetooth and Certified Wireless USB TechnologiesStaccato Communications has announced the delivery of the SC3224R combo Bluetooth Mini Card reference design kit. The SC3224R is the industry's first solution that combines both Bluetooth technology and Certified Wireless USB onto a single PCI Express Mini Card form factor design to provide a fully integrated wireless PAN solution for notebook PC and wireless desktop applications. 
Bluetooth remote controllerRF Solutions has introduced a Bluetooth remote controller that is designed for use with Bluetooth enabled devices such as PCs, PDAs and mobile phones. The BlueControl unit features four relays and is ideal for providing control in applications such as lighting, personal access, and power switching. Alpha Micro Introduces Affordable High-Speed Wireless GPRS ModemAlpha Micro Components, a leading independent distributor of electronic components, has introduced the iTegno 3000 GPRS Modem in response to growing demand for flexible internet connectivity for everyone. Single-chip EDGE transceiver has digital interfaceSilicon Laboratories today announced the Aero® IIed single-chip EDGE transceiver with a digital interface. The Aero IIed is fully compliant with the 2.5G DigRF specification version 1.12 and is pre-validated with leading DigRF baseband implementations. This latest addition to the patented, proven Aero family provides the industry's smallest, most integrated and easiest to design and manufacture DigRF transceiver for GSM/GPRS/EDGE handsets, smart phones and data modems. 
USB Wireless Evaluation Kit from Easy Radio's LPRSNew from Low Power Radio Solutions, the Witney UK based wireless systems specialist, is a USB controlled evaluation kit for their market leading "Easy Radio" plug and play wireless modules. "Easy Radio" is already established as the fastest way to get wireless projects into production, without extensive RF or programming knowledge. These new USB drivers allow direct connection and control from any PC. Flexible antennas complement ISM Band modulesFlexible antennas complement ISM Band modules Online Shop Offers Local Shopping Globally For Short Range Wireless Devices1 Stop Radio is a new concept in online sales for short-range wireless devices (SRD's). As a network of independent vendors with a common stock profile 1 Stop Radio will be offering the very latest wireless products from manufacturers around the world and will soon become the first place to look for the latest wireless products and services. 
RF Transmitter Offers Low System Cost Implementation for Wireless Security, Home Automation ApplicationsSemtech has announced the SX1223, a single-chip, ultra-high frequency transmitter for wireless security and automation applications. The SX1223 is optimized for design reuse with programmable channel, bit rate, frequency deviation and output power - making it well suited for both cost-reducing legacy products and next-generation designs. 
Analog Devices' Blackfin combines processing power, security and ease-of-programming to deliver live video to mobile phonesLooking for a quiet restaurant? Or, wondering if the party has started at your favourite night club? Live video streams to the mobile phones of would-be diners and dancers lets them look inside. An innovative new wireless application called the IRIS(TM) camera uses the Blackfin(R) processor from Analog Devices, Inc. to secure and stream video from a camera to an enabled portable device, such as a GPRS or 3G phone, or laptop. The IRIS(TM) camera |
