LeCroy launches the World's Fastest Oscilloscope !
News Release from:
29 September 2010
LeCroy Corporation's new line of WaveMaster 8Zi-A digital oscilloscopes – the 8 Zi-A Series – now provides up to 45 GHz of bandwidth and 120 GS/s of sample rate – the world's highest bandwidth and fastest sample rate real-time oscilloscope – combined with 768 Megapoints of analysis memory. Additionally, the introduction of a model with 20 GHz of true analog bandwidth on four channels provides the highest performance and signal fidelity available on four measurement channels. On all models, acquisition capability can be doubled with the use of the Zi-8CH-SYNCH Oscilloscope Synchronization Kit, with all acquired channels displayed on a single display grid.
The standard sample rate is 120 GS/s for 45 GHz bandwidth, 80 GS/s for 25 to 30 GHz bandwidths, and 40 GS/s on all 4 channels at 20 GHz bandwidth. For 4 to 20 GHz bandwidths, the standard sample rate is 40 GS/s on all four channels with an option to increase the sampling rate to 80 GS/s on two channels. All memory is available at full record lengths for analysis processing, 20 Mpts/ch is provided standard, with memory options up to 256 Mpts/ch available. In 120 and 80 GS/s mode, memory can be interleaved to 768 and 512 Mpts/ch.
The WaveMaster 8Zi-A models utilize second generation silicon germanium (SiGe) components to ensure high performance. SiGe is the most widely adopted and deployed semiconductor fabrication process with many years of commercial deployment. Additionally, it has none of the thermal conductivity, reliability, yield, cost and other concerns that captive in-house processes must contend with. LeCroy’s 30 to 45 GHz 8Zi-A models make use of sixth generation Digital Bandwidth Interleave (DBI) to effectively and reliably extend bandwidth without the deleterious effects of bandwidth “boosting”.
LeCroy has designed the 8 Zi-A Series as a single hardware platform, supporting all nine models spanning from 4 to 45 GHz of bandwidth. This means engineers can leverage their investment and stay current with emerging high-speed technologies and serial data standards by purchasing only the bandwidth needed for current designs, and upgrading to additional bandwidth as needs change. Customers who had previously purchased an 8 Zi model can upgrade to 8 Zi-A performance and bandwidth.
Highest Performance 4-Channel Oscilloscope
The WaveMaster 820Zi-A model provides four channels at 20 GHz with exceptional performance and signal fidelity. The second generation SiGe chipset used in the 8Zi-A provides ample bandwidth out to 20 GHz without the need for the bandwidth “boosting” that is utilized on competitive products that are rated in hardware to 16 GHz and utilize digital signal processing (DSP) to excessively “boost” bandwidth. This type of bandwidth boost used by competitors carries significant signal fidelity penalties such as increased noise, increased jitter noise floor, excessive overshoot, and effective number of bits (ENOB) dropouts in the mid-bandwidth range. Conversely, the 820Zi-A model suffers from none of these phenomena and exhibits exceptional rise time, overshoot, noise, and jitter noise floor performance, including class leading total jitter noise floor of <190 fs rms.
World’s Highest Bandwidth Real-Time Oscilloscope
With the launch of the WaveMaster 845Zi-A model, LeCroy again assumes bandwidth leadership in real-time oscilloscopes. The 845Zi-A uses proven, second generation SiGe track and hold and analog-to-digital (ADC) components to achieve exceptional performance. This unprecedented oscilloscope bandwidth is ideal for leading-edge research and development applications, especially in the optical market for high-speed next generation long-haul optical network development. In addition to the 45 GHz capability, the oscilloscope may also be operated in a 30 GHz / 2 ch. or a 20 GHz / 4 ch. mode. This gives flexibility to utilize multiple channels at 30 GHz or 20 GHz for timing validation while utilizing fewer channels for high bandwidth signal fidelity measurements.
The 20 GHz four channel rating of the 845Zi-A has 25% more bandwidth compared to competitive offerings that reach to 30 GHz and only provide a four channel bandwidth of 16 GHz. Jitter Noise Floor at 45 GHz is an astounding 125 fs rms.
Maximum sample rate in single channel mode is 120 GS/s (45 GHz), with 80 GS/s and 40 GS/s operation in 2 channel (30 GHz) and 4 channel (20 GHz) modes respectively. Likewise, maximum analysis memory available is 768, 512, or 256 Mpts/ch in 45, 30, and 20 GHz modes respectively.
Second Generation Enhancements Improve Test Capability
WaveMaster 8 Zi is known for fast analysis throughput, and WaveMaster 8 Zi-A significantly advances LeCroy’s analysis capabilities with additional processing power that further augments the X-Stream II Streaming Architecture. The Intel®Core™2 Quad processor rated at 3 GHz (with an effective 4 x 3 GHz = 12 GHz processing speed), 8 GB of RAM, and Windows 7 64-bit OS is standard. X-Stream II technology enables high throughput of data – even when the oscilloscope is analyzing 768 Mpt waveforms, by using variable waveform segment lengths to improve CPU cache memory efficiency resulting in 10 to 20 times faster processing compared to other oscilloscopes. The new processor is 20% faster than before, and is fully utilized by the X-Stream II architecture. Fittingly, standard memory on all 8 Zi-A oscilloscope models has been increased from 10 Mpt/Ch to 20 Mpt/Ch, and from 20 Mpt/Ch to 32 Mpt/Ch on the SDA models. The highest bandwidth SDA 845Zi-A model is standard with 96 Mpt/Ch of memory at 45 GHz.
WaveMaster 8 Zi-A deploys second generation silicon germanium (SiGe) chipsets to provide improved performance. Aside from increased bandwidth (20 GHz on four channels, mentioned earlier), the new second generation chips provide improved signal to noise performance of approximately 25%.
The Jitter Timing and Analysis (JTA2) toolkit and XDEV Advanced Developer’s Toolkit are now standard in the 8 Zi-A models. The JTA2 toolkit contains several powerful tools, such as Track, that provides a graphical plot of a measurement parameter vs. time, and Histogram, that provides a graphical statistical view of measurement statistics. Track is especially helpful to understand measurement or jitter parameter variations over time. Track can be used to the full record length of the oscilloscope, allowing millions of measurements to be measured and graphed over very long periods of time. This capability to measure and process and full record lengths is unique to LeCroy. The XDEV Advanced Developer’s Toolkit allows unsurpassed customized integration by permitting an engineer to create and run custom math and measurement algorithms written in MATLAB, C/C++, Excel, Visual Basic Script (VBS) or JAVA script to be inserted into the oscilloscope processing stream with a result returned on the oscilloscope display and available for further analysis and processing.
Serial Data Analyzers with Superior Serial Data Analysis
For serial data applications, nine new Serial Data Analyzer (SDA) models from 4 to 45 GHz with similar sample rate, and analysis memory capability are combined with LeCroy’s powerful SDA II Serial Data Analysis tools and standard serial trigger to provide unmatched capability for implementing and debugging emerging, high-speed serial data standards, such as PCIe 3.0 and USB 3.0.
LeCroy’s advanced SDA II Serial Data Analysis software provides superior ability to analyze and debug jitter problems utilizing unique and more precise measurement and analysis tools for both eye diagram and jitter decomposition. Additionally, eye diagram analysis is typically performed 100 times faster than competitive tools ― nearly 1 million unit intervals of PCI Express can be captured, analyzed, and displayed in 3 seconds.
At the compliance stage, automated QualiPHYTM packages are available for a variety of established standards, such as USB3, PCIe, SAS, SATA, DDR, HDMI, and DisplayPort.