Production
Join Kyzen’s Dr. Mike Bixenman at IPC Midwest 2011 for a Discussion on Cleaning Challenges in an HDI World
Kyzen, a world leading provider of environmentally responsible precision cleaning products for electronics and high-technology manufacturing operations, announces that Dr. Mike Bixenman along with Mark Northrup and Andy Buchan of IEC Electronics, Joe Russeau of Precision Analytical, and Tim Jensen of Indium Corporation will present "Cleaning Challenges in an HDI World" at the upcoming IPC Midwest Exhibition and Conference scheduled to take place September 21-22, 2011 at the Renaissance Schaumburg Hotel and Convention Center in Schaumburg, IL. The presentation will be held during Session S01, titled "Test and Measurement Solutions," which will take place on Wednesday, September 21 from 9 a.m.-12 p.m.
Christopher Associates to Display Advanced Equipment and Materials at the SMTA Long Island Expo & Tech Forum 2011
Christopher Associates Inc. will showcase equipment and materials from its world-class suppliers at the upcoming Long Island SMTA Expo and Technical Forum, scheduled to take place on September 21, 2011 at the Islandia Marriott Long Island in Islandia, NY
Join Kyzen’s Dr. Mike Bixenman at IPC Midwest 2011 for a Professional Development Course on the IPC-CH-65B Cleaning Handbook
Kyzen, a world leading provider of environmentally responsible precision cleaning products for electronics and high-technology manufacturing operations, announces that Dr. Mike Bixenman will teach a Professional Development Course on the IPC-CH-65B Guidelines for Cleaning of Printed Boards and Assemblies at the upcoming IPC Midwest Conference & Exhibition, scheduled to take place September 21-22, 2011 at the Renaissance Schaumburg Hotel and Convention Center in Schaumburg, IL.
Benchtop UV Conveyor Offers Fast Cures
Specialist adhesives company Intertronics has a wealth of UV cure adhesives and UV cure systems for manufacturers looking to upgrade their adhesive technologies or perhaps to move from a traditional mechanical fastening system to an adhesive solution – for reasons of cost and/or quality. Their new DYMAX UVC-5 conveyor system is a bench-top unit offering the benefits of rapid throughput UV curing as part of a production line or as stand-alone equipment for curing UV adhesives as well as UV curable inks and coatings. The DYMAX UVC-5 offers very high intensities for fast UV curing (up to 10 metres per minute) with complete shielding from UV light and consistent cure times. This cost-effective and versatile conveyor system is ideal for production and lab environments.
Custom Interconnect Limited expands its Andover Electronics Manufacturing Facilities.
CIL's Electronics Manufacturing Facility has been based in Andover, Hampshire since 2005 and currently employs 120 personnel at its headquarters in Charlton Road, Andover. To meet the planned growth and the increases we has seen in full product manufacturing, CIL has invested in an additional 10,000 square feet of Product Manufacturing Facility in Andover.
Professional Solutions for Hot Air SMD Rework
From November 15-18, Finetech will exhibit professional system solutions for hot air SMD rework at the Productronica 2011 show in Munich.
BTU International to Present at 2011 Shenzhen International SMT High-Level Conference
BTU International announces that Fred Dimock, process technology manager at BTU International, will present a paper titled "Transferring Recipes from an 8 Zone Reflow Oven to a 10 Zone Oven and Unexpected Savings" during the 2011 Shenzhen International SMT High-Level Conference, which will be held in conjunction with NEPCON South China 2011. The presentation will be held from 2-3 p.m. on August 31 at the Shenzhen Convention Center in Conference Room 3, Rose Hall.
Get First-Class Performance with Dow Corning TC-5026 Thermal Grease from Krayden
Krayden, Inc., a leading distributor of engineered materials, introduces TC-5026 Thermal Grease from Dow Corning. Designed with reliability in mind, TC-5026 is solvent-free for the highest stability.
KaiSemi’s Zero NRE FPGA-to-ASIC Replacement Debuts in Australia and New Zealand
KaiSemi Ltd., a fabless semiconductor vendor, and Apex Electronics, a New-Zealand based electronics components distributor, announced that they will launch KaiSemi's "Zero NRE" automated FPGA-to-ASIC replacement solution in Australia and New Zealand on September 14th, 2011.
iNETest Technologies India to Showcase BPM Microsystems’ Universal Device Programmers at Electronica/Productronica India 2011
BPM Microsystems announces that its distributor iNETest Technologies India Pvt Ltd will highlight its manual universal device programmers in Hall 11, Stand 1125 at the upcoming Productronica India exhibition, scheduled to take place September 13-16, 2011 at the Pragati Maidan in New Delhi, India.
Europlacer to Demonstrate XPii-II SMT Pick-and-Place Machine and Speedprint to Demonstrate SP700avi SMT Stencil Printer at IPC Midwest Conference
Europlacer, a designer and manufacturer of comprehensive SMT pick-and-place equipment for the global electronics industry will demonstrate its XPii-II pick-and-place machine along with Speedprint's SP700avi 29" Inline Stencil Printer in booth 309 at IPC Midwest, taking place September 21-22 at the Renaissance Schaumburg Hotel and Convention Center in Schaumburg, IL
Q Corporation to Exhibit FANUC M1iA at IPC Midwest 2011
Q Corporation, a leading global supplier of SMT production solutions, announced that it will highlight the FANUC M-1iA robot with integrated taping cell in Booth #325 at the IPC Midwest exhibition, scheduled to take place September 21-22, 2011 at the Renaissance Schaumburg Hotel and Convention Center in Schaumburg, IL.
JBC Tools Inc. to Exhibit at IPC Midwest 2011
JBC Tools announced that it will feature its Nano Station in Booth #226 at the upcoming IPC Midwest Conference & Exhibition, scheduled to take place September 21-22, 2011 at the Renaissance Schaumburg Hotel and Convention Center in Schaumburg, IL.
Aqueous Technologies’ Trident XLD on show at IPC Midwest 2011
Aqueous Technologies Corp., North America's largest provider of batch defluxing systems, will highlight the Trident XLD in Booth #206 at the upcoming IPC Midwest Conference & Exhibition, scheduled to take place September 21-22, 2011 at the Renaissance Schaumburg Hotel and Convention Center in Schaumburg, IL.
Kyzen to Debut AQUANOX A4638 Advanced Packaging Cleaning Chemistry at IPC Midwest 2011
Kyzen, a world leading provider of environmentally responsible precision cleaning products for electronics and high-technology manufacturing operations, will introduce its new AQUANOX A4638 Advanced Packaging Cleaning Chemistry in Booth #306 at the upcoming IPC Midwest Conference & Exhibition, scheduled to take place September 21-22, 2011 at the Renaissance Schaumburg Hotel and Convention Center in Schaumburg, IL.
BTU International to Exhibit New Features of PYRAMAX Solder Reflow Oven at NEPCON South China 2011
BTU International, a leading supplier of advanced thermal processing equipment for the alternative energy and electronics manufacturing markets, will showcase its new Dual Lane Dual Speed capabilities of the PYRAMAX™ solder reflow system, as well as next-generation HE Flux Management, in Booth #1F42 at the upcoming NEPCON South China 2011, scheduled to take place August 30-September 1, 2011 in Shenzhen, China.
Christopher Associates’ Products and Technologies on show at the 2011 Assembly & Automation Technology Expo
Christopher Associates Inc. announces that it will exhibit in Booth #658 at the upcoming Assembly & Automation Technology Expo, scheduled to take place September 20-22, 2011 at McCormick Place North in Chicago, IL. Christopher Associates will exhibit the latest equipment and materials from its world-class suppliers, including:
Virtual Industries to Debut VIR-STAT Air Ionizers at the Assembly & Automation Technology Expo 2011
Virtual Industries Inc., a leading supplier of manual vacuum handling solutions, announces that it will display several advanced systems in Booth #753 at the upcoming Assembly & Automation Technology Expo, scheduled to take place September 20-22, 2011 at McCormick Place North in Chicago, IL.
GPD Global to Exhibit PCD ‘H’ Series at Assembly & Automation Technology Expo 2011
GPD Global, a manufacturer of precision fluid dispensing systems for high-volume 24/7, low-volume/high-mix and R&D production will debut its Positive Cavity Displacement (PCD) 'H' Series high-resolution pumps in Booth #1849 at the upcoming Assembly & Automation Technology Expo, scheduled to take place September 20-22, 2011 at McCormick Place North in Chicago, IL.
CyberOptics Sells 1000th In-line Inspection System to Electronics Manufacturers in China
CyberOptics a leading SMT inspection solutions provider, announces the sale of its 1000th in-line inspection system to electronics manufacturers in China. With more than 150,000 sensors in the field and greater than 3,000 systems installed globally, the company's expertise in designing sensors and developing quality inspection solutions is unsurpassed.
Foiled aluminum for PCB production from Polytronics Technology Corporation
NEON-EK introduces foiled aluminum for PCB production from Polytronics Technology Corporation. The main characteristic of this material is high thermal conductivity that is 20 times higher than traditional epoxy system that allows applying it in systems with intensive heat-up. While PCB based on Polytronics foiled aluminum is affected by high temperature, it saves its form and has no bending.
ACD Appoints Production Manager
ACD, a leading supplier to the electronics industry, has broadened the role of Lance Friedemann, who has worked as the company's Design Manager for more than five years.
Kyzen to Exhibit Extensive Range of Surface Treatment Technologies at Eurofinish 2011
Kyzen, the world leading provider of environmentally responsible precision cleaning products for electronics and high-technology manufacturing operations, announces that it will showcase a comprehensive range of aqueous-based cleaning solutions at Booth 8322 during Eurofinish 2011, scheduled to take place 27-29 September, 2011 in Ghent, Belgium
Nitrogen For Modified Atmosphere Packaging Available Practically FOC
The Nitrogen generators available from Hi-line Industries can be matched to individual site demand requirements of Nitrogen users to ensure maximum economy and performance. Nitrogen gas is commonly used throughout many industries where safe, inert environments are required. This includes the petroleum, chemical, pharmaceutical, paint and varnish industries as well as the production of ferrous and non-ferrous metals, together with electronic and glass products.
Spartanics Unveils Designers’ Turnkey Digital Print-to-Laser Cutting System
(LabelExpo Europe 2011, Brussels, Stand 9H54) Designers of electronics, lighting and AV products labels as well as other precision cut electronic components and a wide range of other products involving digital printing and/or digital finishing (laser cutting) can now direct and control ALL print and laser cutting finishing specifications at the earliest design stages with Spartanics' latest laser cutting innovation--Designers' Turnkey Digital Print-to-Laser Cutting System.
Nihon Superior Introduces SN100C lead-free solder
Nihon Superior Co. Ltd., a supplier of advanced soldering materials to the global market, introduces SN100C (551CT), the newest addition to its SN100C lead-free solder series.
Teknek Experiences High Demand For Thin Film Cleaning Technology
Teknek has reported unprecedented demand for its Ultracleen cleaning roller since its launch in May. Ultracleen is designed to effectively remove debris and contamination from thin film. Highly engineered thin film is increasingly used in flat panel displays (FPD), touch panels, automotive applications and thin film solar panels. In all these sectors there is a zero tolerance policy to defects and the presence of foreign particles in the production process leads to high reject rates. The Ultracleen roller combats this contamination without damaging delicate and sensitive materials and dramatically increases yields and reduces waste
Speedprint Appoints Promise Technologies
Speedprint, part of the Blakell Europlacer Group, has appointed Promise Technologies as its representative for the states of Minnesota, North Dakota, South Dakota and western Wisconsin.
Christopher Associates to Exhibit World-Class Products at the SMTA Capital Expo & Tech Forum
Christopher Associates Inc. announces that it will exhibit at the upcoming SMTA Capital Expo & Tech Forum scheduled to take place September 13, 2011 at the Johns Hopkins University/Applied Physics Lab in Laurel, MD.
Engineered Conductive Materials, LLC Introduces Conductive Grid/Busbar Inks for Thin-Film Photovoltaic Applications
Engineered Conductive Materials, LLC, a leading global supplier of conductive interconnect materials for photovoltaic applications, introduces two next-generation conductive grid inks, CI-1083-L and CI-1081-H, for use in thin-film solar modules. These material formulations have been optimized for excellent conductivity and low contact resistance on transparent conductive oxides used in solar applications.
ACD Develops Virtual Gerber Checks
ACD, a leading supplier to the electronics industry, has taken CAM and Gerber checks to a new level with its new virtual PCB layer overlay.
Two Electronics Industry Leak Detection Equipment Matching Services Announced by Uson
Electronic components and products manufacturers seeking increased production efficiencies and lower costs now possible with use of state-of-the-art leak detectors for electronic parts and products assembly, can now select between two new leak detection equipment matching services from Uson, the pioneer of dry air leak testing methods with arguably the most experienced leak test applications laboratory capable of designing best-match leak detection equipment best suited for testing batteries, sealed automotive electronic control assemblies, solenoid valves, as well as a wide range of other electronics industry applications. These two no-cost services are: 1) Uson's Leak Detector Express Proposal service assuring a 48-hour return on RFPs (Requests for Proposals) and suitable for most in the industry; and 2) Uson's Leak Detection Equipment Custom Application Proposal service for unusual applications that require multi-phase analysis of best-match leak detection equipment at the concept stage, final designs, training, and factory installation and acceptance testing.
Kyzen Shows Continued Support of the SMTA by Sponsoring SMTA International 2011
Kyzen, a world leading provider of environmentally responsible precision cleaning products for electronics and high-technology manufacturing operations, announces that it is a corporate sponsor of the upcoming SMTA International Conference & Exhibition, scheduled to take place October 18-19, 2011 at the Fort Worth Convention Center in Fort Worth, TX. Kyzen will sponsor the golf hole and lunch for the event.
Kaisertech launches a new range of vertical driver stands from HIOS
Kaisertech, the UK's leading supplier of electronic and engineering consumables and production equipment, has introduced a new range of vertical screwdriver bench stands from Hios. The arrival of the new VMS40 & VMS50 models, which will be sold exclusively through Kaisertech in the UK, follows strong demand for the company's existing range of Hios electric screwdrivers.
Engineered Conductive Materials to Debut Conductive Adhesives for Back Contact Solar Modules at PVSEC 2011
Engineered Conductive Materials, LLC, a leading global supplier of conductive interconnect materials for photovoltaic applications, will introduce its new line of conductive adhesives for back contact solar module applications in Hall A1, Stand B4 at the upcoming European Photovoltaic Solar Energy Conference and Exhibition (PVSEC), scheduled to take place September 5-8, 2011 at the CCH Congress Centre and International Fair in Hamburg, Germany.
Expanded Product Range at Intertronics
The Opti-tec range of optical adhesives and encapsulants continues to develop, and includes many with high optical clarity or other special properties related to specific optical applications such as fibre-optic termination or optical potting and encapsulation. Some of the range have passed ISO 10993 testing for medical device manufacture or are Telcordia GR-326-CORE compliant. Specialist applications include LED protection, bonding of surgical instruments like endoscopes and fibre-optic terminating.
Essemtec Doubles Dispensing Speed and Accuracy - Scorpion Automatic Dispensing System sets new standards
Essemtec introduces the new Scorpion automatic dispensing system in August 2011. The machine is built on the Paraquda machine base, which enables highly accurate dispensing and performance of up to 100'000 dots per hour. The machine can be equipped with up to four different dispensing valves and is designed for flexible and productive dispensing in electronics manufacturing, LED assembly and other industries.
VadaTech Doubles Production Capacity of Existing Lines with Two Europlacer XPii-IIT SMT Pick-and-Place Machines
Europlacer, a designer and manufacturer of comprehensive SMT pick-and-place equipment for the global electronics industry, announces that VadaTech, Inc., a board level design and manufacturing company focused on quick-turn designs for the embedded market, has purchased two XPii-IIT pick-and-place machines for its plant in Henderson, NV.
Techcon Systems Enhances the TS6500CIM Techkit Mixer
Techcon Systems, a product group of OK International and a leading provider of fluid dispensing systems and products, introduces the updated TS6500CIM Techkit Mixer. Following positive feedback received from world-leading aerospace manufacturers, Techcon Systems has further enhanced the mixer, meeting and exceeding recommendations, while still maintaining the low cost of its predecessors
Practical Components Adds Additional Test Boards for Cleanliness Testing and Conformal Coating
Practical Components, a leading international distributor of mechanical IC samples or "dummy" components and SMD production tools and equipment, announces that it has added additional test boards and kits for testing for process cleanliness and conformal coating.
