High voltage, X-ray

X-ray generator PSUs offer high stability and low ripple

News Release from: HiTek Power Ltd
19/03/2008

HiTek Power's MH60 high voltage power modules for use in X-ray generation applications offer high stability, low ripple and a safety interlock. They are based on HiTek Power's "core engine" strategy, which combines high-voltage technologies in different combinations to offer semi-custom supplies for specialised markets, offering an optimal solution, reduced time to market and lower engineering charges.

Intended for OEM use, the MH60 modules are powered from a 24V DC input and supply up to 60W of output power at 30kV, 40kV or 50kV depending on model. They allow full-range monitoring and control of output voltage and current, and will operate at full rated current without needing a cooling fan.

The modules offer an optional safety relay operated with signal feedback. They also offer flashover and continuous short-circuit protection, with no trip. Positive or negative output polarity is offered, to order, and full RS232 remote control is available as an option.

Typical applications for the MH60 will include X-ray equipment; wide-angle, high-definition CRTs; insulation and materials testing; and projection.