AnalogicTech, DC/DC converter, AAT1110
Tiny 800mA step-down DC/DC converter
News Release from:
Advanced Analogic Technologies Inc., Europe
15/05/2006
By mounting an 800mA converter in a tiny SC70JW package, AnalogicTechıs AAT1110
delivers the higher current that these new designs require yet still enables the smallest solution size possible. The AAT1110 is the industryıs first 800mA step-down DC/DC converter in a
tiny 2.0x2.1mm SC70JW package.
Optimized for extremely fast transient response, this latest member of AnalogicTechıs rapidly growing voltageconverter family is ideally suited for powering up heavy loads in high performance, ultra-portable convergent systems, such as PDA handsets and smart phones.
The AAT1110 operates across an input range of 2.7V to 5.5V, and output levels as low as 0.6V. The device delivers up to 800mA of current while maintaining a low 27microamp no load quiescent current. It is available in either a fixed version with internal feedback or a programmable version with
external feedback resistors.
The AAT1110ıs fast transient response meets the tough specifications
required to power the baseband chipset in GSM phones. A high 1.4MHz
switching frequency helps reduce solution footprint by allowing the use of
extremely small external inductors and capacitors. Integrated soft-start
capability eliminates any output voltage overshoot when the enable or input
voltage is applied.
To protect the device from overload conditions, the AAT1110 limits peak
current after a current limit has been sensed over a series of clock cycles.
In addition, an over-temperature protection circuit disables switching once
internal dissipation reaches a pre-set level. When over-current or
over-temperature fault conditions are removed, the output voltage
automatically recovers.
The AAT1110 is specified over the -40 to +85 degrees C temperature range.
The device is available in a Pb-free, 8-pin, 2.0x2.1mm SC70JW package
For further information and reader enquiries:
|
