PCB Connectors
Elegant Fast, capable and affordable: customized problem solvers from SUYIN for board-to-board (BTB) connectors
SUYIN offers a broad range of standard PCB connectors and board-to-board connectors. This begins with versions featuring very simple contact configurations and extends all the way to highly complex configurations covering a wide variety of pitches – from fine pitch (0.5 mm) to 2.54 mm and higher pitches.
WAGO picoMAX PCB Pluggable Connector System
A shortened current path, minimal voltage drop and vibration-resistance up to 20 g enable WAGO Corporation's picoMAX to change the price-to-performance ratio for PCB applications. The Pluggable Connection System employs a dual-purpose spring design that applies the force of one CAGE CLAMPS contact spring for superior connector integrity and connection strength.
HARTING Announce Tool-Free Individual Conductor Wiring With 1.27 mm Spacing
har-flexicon from HARTING is a miniaturised individual conductor PCB connection technology featuring 1.27 mm spacing and ideally suited to field assembly. Consisting of a pluggable SMD terminal block, with IDC wire connection, har-flexicon allows the rapid, tool-less termination of single wires directly on to a PCB, with the benefits of low processing costs, compatibility with automatic SMT mounting and reflow soldering process, and a high level of rigidity with large-area SMT fixings.
Nicomatic Launch Male 90° SMT Connectors With Latch & PCB Pegs
Nicomatic has today revealed the introduction of new latched male 90° SMT headers with latch & moulded pegs which align and brace the PCB tails for trouble free assembly and use. These new headers are designed to enable 90° soldering on PCB. Two functions allow the right PCB integration thanks to PCB pegs made for plated or non plated holes: perfect locating on PCB and excellent PCB retention.
Count On Tools releases low-cost EKRA board support pins
Count On Tools introduces PCB Magnetic Support Pins for EKRA Screen Printers. Count On Tools has recognized the need for more affordable board support options in the electronics manufacturing industry and has delivered a cost-effective solution.
Series 720 Snap-in Panel-Mount Connectors with Dip Solder Contacts
Binder-USA has expanded the Series 720 snap-in panel-mount receptacles to now offer dip solder contacts. This addition provides more options for applications requiring a direct assembly to a printed circuit board. The snap-in connectors are ideally suited for commercial and medical applications because of their quick connect and disconnect feature.
110 Amp SBS75G 3 Pole Connector With Touch-Safe Interface
Anderson Power Products has today unveiled a new addition to the SBS connector family with the release of their new 3 pole SBS75G connector. The SBS connector family features PCB-to-wire and wire-to-wire solutions for up to 110 amps. Low resistance silver plated contacts for wire sizes from #6 AWG (16 mm²) to 16 AWG (1.5 mm²) are held inside compact and ergonomic housings with a touch-safe interface.
Create a multi-pin Connector on a PCB thanks to HARTING's Circuit board adaptor
HARTING has today announced the release of a new 5-pin circuit board adaptor which, when combined with a Han DDD module from the company's proven Han-Modular series, makes it possible to create a multi-pin connector on a printed circuit board. The circuit board adapter can be pre-assembled on the PCB by following the hole pattern.
New Plastic Fasteners and Fixings Range from TR Fastenings
TR Fastenings is delighted to announce the launch of its new plastic products range for Printed Circuit Board hardware and Cable Management requirements. Plastic fasteners and fixings are set to be a core part of TR's expansive product portfolio, with a comprehensive range available, on demand and competitively priced.
DIN 41612 Connectors from Lane Electronics available in a range of termination lengths
Lane Electronics, one of the UK's leading suppliers of electrical and electronic connector products, has made available the Pancon DIN 41612 connector range and is offering product on very short lead times.
Molex Launches Vertical PCB Launch Configuration
Molex have released the Precision 2.4mm Compression-Mount Test Connectors, the industry's only high-speed vertical PCB launch configuration operating to 50 GHz. The unique vertical PCB launch configuration gives the Precision 2.4 mm Compression-Mount Test Connectors key advantages over more traditional end-launch connectors.
Molex Unveils Two New Versions in its Premo-Flex Line of Jumpers
Molex Incorporated announces the addition of two new products in its Premo-Flex line of flat flex cable and etched polyimide jumpers. Both products provide ultra-flexible, durable PCB connections for a variety of applications including medical devices, consumer electronics and automotive electronics.
Harwin adds new size coin cell holders to its EZ-BoardWare range
Harwin has expanded its EZ-BoardWare range of PCB hardware products with four new coin cell holders. As with all the EZ-BoardWare products, the EZ Coin Cell Holders - which cover battery sizes BR1225/CR1225 and BR2032/CR2032 (12.5 and 20.0mm diameter) - are designed to reduce manufacturing costs by eliminating time-consuming secondary assembly operations.
Molex Modular NeoScale Mezzanine Interconnect Delivers Optimal Signal Integrity at 28+ Gbps
Molex Incorporated has launched a new modular NeoScale mezzanine interconnect system capable of achieving optimal signal integrity at data rates of 28+ Gbps. Designed for printed circuit board (PCB) mezzanine applications in enterprise networking towers and telecommunication hubs and servers, in addition to industrial controllers and medical and military high data-rate scanning equipment, the NeoScale mezzanine interconnect features a patent-pending triad wafer configuration that isolates each differential pair for optimal performance and customisation.
New Shrouded Male Connectors from Mill-Max
Mill-Max introduces shrouded male pin connectors for applications where a robust, secure connection is demanded, such as frequently mated interconnects and blind mate conditions. These double row connectors come in 4 to 64 pin configurations and are available in through- hole and surface mount termination styles.
Anderson Power Products Introduces SBS 75xPR PCB Power and Signal Connector
Anderson Power Products has expanded its SBS 75x connector family by introducing a new right angle printed circuit board connector. The SBS75x connector family was created to provide a touch-safe and high power connector with two primary and four auxiliary power positions in a compact and ergonomic design. The addition of the PCB connector expands the SBS75x connector family's capability to include PCB-to-wire and wire-to-wire applications.
New Tape & Reel Packaged SMT Pin from Mill-Max
Mill-Max is pleased to introduce a new SMT pin for use as a test point or for low profile board-to-board connections. These pins are available packaged on tape & reel for pick-and-place assembly or in bulk for low volume requirements and prototyping. The part numbers are: 1508-0-57-15-00-00-03-0 for tape and reel packaging and 1508-0-00-15-00-00-03-0 for bulk.
Molex EXTreme Guardian System Delivers a Compact, High-Power Header and Cable Solution for the Top-End Server Market
Molex Incorporated today introduced the EXTreme Guardian header and cable solution for high-end servers in the computing and telecommunication markets. The products feature a three circuit, wire-to-board design that delivers up to 80 Amps of current per circuit, a PCB header with centreline spacing of 11.00mm (.433") for increased PCB real-estate savings and an EMI-shielding option to reduce cable crosstalk and improve immunity to external noise.
Ultra-Low & Low Profile Spring Pins
Mill-Max has developed a series of ultra-low and low profile spring pins for applications where above board height is limited. As packaging requirements for electronics continue to shrink in size, traditional interconnects don't always fit the bill. For board-to-board or device-to-board connections, low profile spring pins are a practical solution.
Mill-Max Expands its Line of Receptacles with Organic Fibre Plug Solder Barrier – 14 Styles Offered, Tape & Reel Packaged
Mill-Max's organic fibre plug (OFP) solder barrier receptacles are discrete sockets for through-hole soldering into printed circuit boards. These open bottom receptacles are fitted with organic fibre plugs to prevent solder, paste or flux from contaminating the internal contact during the placing and soldering process.
Industrial PCB connectors with built-in transformers
HARTING has extended its RJ Industrial RJ45 connector family by introducing a range of PCB jacks with built-in transformers. The highly compact dimensions of these RJ45 connectors enable convenient and simple integration into all established IP 65/67 interface types, from PushPull to Han 3A.
Lane’s ITW McMurdo Edgecard PCB Connectors Assembled And Delivered Quickly
Lane Electronics, one of the UK's leading interconnection specialists, has expanded the production and assembly capability of its ITW McMurdo Edgecard PCB connector range. Because manufacture and assembly is on site, delivery lead times for these PCB connectors are generally very short.
Lane Electronics - Micronector High Density Two Part Connectors
Lane Electronics has made available ITW McMurdo's Micronector 200 and Micronector 300 high density 2mm pitch connectors. By agreement with ITW McMurdo, Lane Electronics has a BS approved assembly at its Horsham HQ where standard and customer specific product can be supplied on very short lead times.
Angled version of PCB connector enables flexible equipment configurations
HARTING's har-flex series, the recently introduced PCB connector family designed for a wide range of board-to-board and board-to-cable applications, has been extended with the introduction of an angled version.
Top performance: Right-angle, Type-A single USB-3.0 receptacle from SUYIN protrudes just 2.5 mm above the PCB surface
SUYIN's 020053XR009MX21XL 9-pin, right-angle, Type-A single USB-3.0 receptacle for through-hole mounting is a particularly space-saving variant. With an overall length of 16.6 mm, this female USB 3.0 connector is very short. Moreover, due to its innovative sink type housing design, this receptacle can also be partially inserted into a recess in the printed circuit board, which makes it possible to achieve an unusually low component height of just 2.5 mm above the board.
Lane Electronics - IDC Connectors For Discrete Wire Or Flat Cable
Lane Electronics, recognized as an industry leader for the supply of electrical and electronic interconnection products, just announced a comprehensive range of mass- terminated insulation displacement contact (IDC) connectors and mating headers together with a wide selection of application tooling and accessories.
Anderson Power Products introduces SBS 75xPR PCB Power and Signal Connector
Anderson Power Products has expanded its SBS 75x connector family by introducing a new right angle printed circuit board connector. The SBS75x connector family was created to provide a touch-safe and high power connector with two primary and four auxiliary power positions in a compact and ergonomic design. The addition of the PCB connector expands the SBS75x connector family's capability to include PCB-to-wire and wire-to-wire applications.
Wieland Electric Introduces Pluggable Printed Circuit Board Terminals
Wieland Electric Inc introduces its new pluggable printed circuit board (PCB) terminals. Wieland's 3.5 millimeter pitch high density PCB connector provides an extremely high density design while still maintaining a pitch that is easy to work with. The angled PCB headers are particularly designed for contacting automation technology control devices or controllers.
Full metal RJ45 flange for use in the harshest of industrial environments
The Y-ConFlange-40 and the Y-ConFlange-40-C from Yamaichi Electronics are a full metal RJ45 housing flange with a very robust surface. The Y-ConFlange-40-C comes equipped with integrated seals and when mounted or with its protective cap in place it meets the requirements of IP67 and IP68 protection classes. It covers a working temperature range from -40 °C to +85 °C.
Mill-Max Offers 3 Additional High Current Spring Pins
Mill-Max is pleased to announce the addition of three new large scale, high current spring pins to our expanding family of ruggedized spring-loaded products. In contrast to our miniature spring pins, which are typically used on .100" (2.54 mm) centers, these new offerings are for applications where greater spacing is required due to electrical and mechanical specifications.
ERNI Electronics Enables Reliable PCB Connection At Minimal Required Space
ERNI Electronics enables reliable PCB connections in extremely miniaturized applications like bulbs or LED systems. The new IDC-PCB terminal with a total height of only 2.9mm eliminates manual preparation of wires prior termination. The IDC dual contact provides a reliable gas tight connection to conductor of wire. These means that the costly and unreliable hand soldering can be replaced and no special tool is required for termination
8D Double Flange
SOURIAU´s secure PCB connection for hostile environments, its 8D Double Flange (38999 Series III) enables the panel fixing to be separated from the PCB connection. This is an elegant, robust, high-performance solution for connecting up PCBs in boxes whilst retaining all the flexibility of a standard interface.
DSL launches new range of industrial I/O products
DSL has introduced a new range of compact and robust industrial I/O products. The EX- 9510 is designed to extend RS422/485 serial signals up to 1,200mtrs, while the EX-9531 converts a USB port to an RS485/422 serial port. The third in the new series is the EX-9486-w that is a serial LAN/WAN converter that provides control of a serial device over a local network or across the internet.
FCI’s New Mezzanine Technology Delivers Performance and Profit
FCI announces the release of the FCI MezzoStak™ 0.5mm-pitch mezzanine connector, a hermaphroditic "mates-to-self" design that uses the same part number for both mated sides. This highly efficient technology reduces engineering, financial, administrative and supply chain maintenance burdens by 50 percent.
Mill-Max Now Offers 891 & 893 1 mm Pitch Mezzanine Connectors
Mill-Max introduces 64 position, 1 mm pitch mezzanine connectors for parallel board stacking interconnections. The connectors meet EIA-700 AAAB specifications for IEEE 1386 applications. IEEE 1386 is the industry standard for adding general functionality to motherboards and these mezzanine connectors are the perfect solution for connecting the common mezzanine card (CMC.) Some of the environments where this standard can be found are on VME, VME64 & VME64X boards, CompactPCI boards, Multibus I & II boards, desktop & portable computers and servers. They can also be used as modular connectors for front panel and backplane I/O cards.
Mill-Max Right Angle Shrink DIP .070” (1,78mm) Pitch Strips
Mill-Max has added right angle options to our line of .070" (1,78 mm) pitch connectors. These single row right angle sockets and headers can be combined with vertical .070" (1,78 mm) pitch connectors for a variety of interconnect configurations. Additionally, the .070" (1,78 mm) pitch spacing allows for higher density packaging than .100" (2,54 mm) pitch, while providing the same current carrying capacity and mechanical strength.
RS adds Harwin 2.54mm-pitch sockets and headers for general-purpose board-to-board and cable-to-board connectivity
RS Components has added a comprehensive range of 2.54mm pitch sockets and headers in the Harwin M20 series to its interconnect offering.
Perfect Solutions for Co-planar PCB Mating in LED Lighting Applications
Board to board connector specialists GradConn launch an online guide to horizontal PCB mating. With images, video and a list of perfect height mating connectors you will find the right design combination quickly and easily.
Surface Mount IDC’s from DMTL connect individual wires directly to the PCB
Leading passive components specialist distributor DMTL has made available from stock the AVX 9176 Series of insulation displacement contact connectors which has been developed to connect individual wires directly to a PCB. The IDC contact provides a gas-tight connection to the wire conductor while the housing has been designed to "grab" the insulation to provide positive strain relief under even the harshest conditions.
Low Profile Molex ClipLok Interconnect Clip Firmly Secures Circuit-to-Board Connections
Molex introduced the ClipLok interconnect clip, an electromechanical connection that easily attaches to secure a membrane switch or FPC tail firmly to a printed circuit board, eliminating the need for mating connectors at each point. A first-to-market product, the low-profile ClipLok interconnect clip provides immediate and reliable circuit-to-board connectivity in a range of consumer, medical, networking and telecommunications applications.
