Exhibitions and Conferences
Molex Brings Next-Generation Medical Device Solutions To MD&M West
Molex continues to tap into world-class interconnect expertise to develop solutions for next-generation healthcare devices. Molex, along with subsidiaries Affinity Medical Technologies LLC, Temp-Flex LLC and Polymicro Technologies, will showcase a multitude of products that enable medical device manufacturers to deliver more robust capabilities in increasingly smaller design footprints. These interconnect products will be on display at MD&M West, February 12 - 14, Anaheim Convention Center, CA, Molex booth 1983.
Altera Showcases Its SoC Devices And Embedded Development Solutions At Embedded World 2013
Altera announce that at Embedded World 2013 in Nurnberg, Germany, it will showcase its embedded hardware and software solutions for developing with its Cyclone V SoC devices. Visitors will see how the advanced performance and flexibility of Altera's SoC devices can deliver unprecedented levels of productivity for next-generation embedded design.
Rogers to Display Materials for High-Performance Digital and Analog Circuit Designs at the 2013 IPC APEX EXPO
Rogers Corporation announces they will highlight several of its high-quality printed circuit board materials at the upcoming IPC APEX EXPO Conference & Exhibition. With more than 400 exhibiting companies expected at the San Diego Convention Center February 19-21, 2013, the IPC APEX EXPO which includes a highly technical conference on new research and developments is one of the industry's leading events for PCB designers.
AUREA Technology launches LynXéa its new all-in-one TCSPC module
AUREA Technology is pleased to announce that they will be launching LynXéa, its new Time-Correlated Single Photon Counting TCSPC module at SPIE Photonics West 2013 at booth # 1123.
Sercos International Strengthens Its World-Wide Presence
Sercos International will present its product and service portfolio together with its members at more than 20 events this year to enhance their presence globally. Sercos will exhibit at several exhibitions and conferences as well as providing additional education with two new seminar opportunities in Germany.
Advanced MP Technology Tradeshow Participation-2013 IIC China Shenzhen
Advanced MP Technology will be participating in the 18th International IC-China Conference & Exhibition in Shenzhen, China on February 28th – March 2nd, 2013. IIC-China is the country's foremost systems design event, where engineers and technology vendors meet to discuss IC application technologies, embedded solutions, and high-end components.
Adder extends its relationship with digital signage market at ISE
Adder Technology will highlight its technologies for the digital signage and custom installation markets on stand F104 in Hall 9 at this year's ISE. The company will demonstrate two new products and preview new technology to be launched later this year.
Cadence to Showcase Advanced FinFET Design Technology at Common Platform Technology Forum 2013
Cadence will introduce its joint development of advanced design technologies in partnership with the Common Platform Alliance (Samsung Electronics, IBM, and GLOBALFOUNDRIES) at the Common Platform Technology Forum on Feb. 5.
GOEPEL electronics’ UK Technology Day 2013 to take place in March
GOEPEL electronics will hold its annual UK Technology Day on March 14th, 2012 at the Duxford Imperial War Museum. This one day event is a mixture of seminar and workshop sessions, where participants can gain deeper insight into the latest capabilities of test technologies like: Embedded System Access including JTAG/Boundary Scan, Automated Optical Inspection, Automated X-Ray Inspection and 3D Solder Paste Inspection.
Teledyne LeCroy Showcases Latest Innovations At DesignCon 2013
Teledyne LeCroy will be showcasing the latest innovations in signal integrity test and measurement at the DesignCon 2013 exhibition in Santa Clara. Show attendees can join Teledyne LeCroy for product demonstrations at the expo, in-depth technical presentations by the R&D engineers, seminars on applications, and discussions with the engineers on the exhibition floor at booth 209.
PSMA Announces Industry Session On Advances In Capacitors And Ultracapacitors For Power Electronics At APEC 2013
The Power Sources Manufacturers Association Capacitors Committee is sponsoring an Industry Session at APEC 2013 titled "Advances in Capacitors and Ultracapacitors for Power Electronics." The session will take place Wednesday, March 20th, 2013, from 2:00 PM to 5:30 PM at the Long Beach Convention Center in Long Beach California, and will feature experts from capacitor companies that serve the power electronics industries, including ECI, CDE, NWL, JME, and KEMET. The presentations will cover the new developments for major capacitor dielectrics and their roles in power electronics.
Discover The Latest In Test, Control and Design At The 2013 National Instruments Technical Symposium
Commencing in February, National Instruments Technical Symposium is a one-day conference aimed at engineers and scientists interested in designing measurement, test and control systems. In-depth technical content and hands-on training is drawn from the most popular sessions at NIDays 2012, the annual graphical system design conference, to provide the most interesting and topical sessions possible.
Seika Machinery To Demonstrate A HIROX Microscope At The IPC APEX EXPO
Seika Machinery announces plans to participate in the Printed Board Assembly Cleaning and Contamination Testing Centre during the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Centre. The HIROX Digital Microscope will be operated in booth #1549. The centre will provide practical support to visitors keen to implement new cleaning and contamination monitoring processes as well as overcome reliability failures.
Energy Micro to showcase low power Cortex-M3 customer applications using the world’s most energy-friendly microcontrollers
Energy Micro will showcase a number of customer applications for its EFM32 Gecko families of ARM-based microcontrollers (MCUs) at Embedded World 2013. These will demonstrate how energy efficient devices greatly extend battery life in real-world products.
Kalray announces the first public demonstration and commercial availability of its MPPA 256-core processor at the HiPEAC Conference in Berlin
Kalray today announced the availability of the first batch of functional and running 28 nanometer MPPA 256 processor targeting high performance, low power embedded applications as well as high performance computing. Following its bold strategy based on leading edge architectural choices and patent protected technologies, Kalray pursues its trajectory to success by demonstrating at the HiPEAC conference in Berlin (Jan 21 to 23rd), a series of applications running on the first series of production grade MPPA-256 processors.
AIM Solder’s Karl Seelig To Present During S12 Technical Session At IPC APEX 2013
AIM Solder announces that its VP of Technology Karl Seelig will present his paper titled "Conformal Coating Over No-Clean Flux" at the upcoming IPC APEX Expo, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in San Diego, CA. This presentation will be held during session S12 titled "Fluxes and Pastes" on Wednesday, February 20, 2013 from 9-10 a.m.
Kyzen To Debut The Ultimate Cleaning Process Tracking System At The IPC APEX EXPO
Kyzen will debut its new InstaTrak monitoring system in Booth #1401 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. InstaTrak is an add-on monitoring system that captures the process data of an in-line aqueous cleaning system.
Pickering Interfaces To Attend ElectroTestExpo 2013
The 'ElectroTestExpo' consortium is pleased to announce the dates for its regional PCB test and debug exhibitions to be held during 2013. Now enjoying its fourth consecutive year of free-to-attend events, ElectroTestExpo will commence its unique combination of drop-in tabletop exhibition and seminar on March 26th at the home of Hampshire County Cricket - the prestigious Rose Bowl (aka Ageas Bowl) in Southampton. A second venue for the Home Counties event scheduled for September 19th will be announced shortly.
FCT Assembly To Debut New NanoSlic Multilayer Coating At The IPC APEX EXPO
FCT Assembly announces that it will highlight its new NanoSlic Multilayer Coating for the first time in booth #2627 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. Florida CirTech has developed the world's first user upgradeable Nano Coating technology for solder paste stencils. It is comprised of 1) A Nano base coat applied over its proven Slic stencil and; 2) A user applied Nano top coat that provides unparalleled printing performance and reduction of underside cleaning.
Europlacer to Debut ii-Feed Tape Feeding Solution at the IPC APEX EXPO
Europlacer will debut the ii-Feed in booth #901 at the upcoming IPC APEX Expo, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. The ii-Feed Cart has a capacity up to 33 separate component channels and accepts any mix of 8, 12, 16 or 24 mm smart ii-Feed Elements.
Laird Technologies to Present at SPIE Photonics West 2013
Laird Technologies has today announced that it will be attending and presenting at SPIE Photonics West 2013. The event will be held at The Moscone Center in San Francisco, California, February 5-7, 2013. Laird Technologies will exhibit at booth #4642. In addition to exhibiting, Dr. Jeff Hershberger, Laird Technologies Staff Scientist and Technology Leader, will participate in a poster presentation session on Tuesday, February 5 from 6 p.m. to 8 p.m.
Acculogic To Introduce Flying Scorpion FLS980 Series III System At IPC APEX
Acculogic will introduce its new Flying Scorpion FLS980 Series III in Booth #1019 at the upcoming IPC APEX Expo, scheduled to take place February 19-21, 2013 at the San Diego Convention Centre in California. The Flying Scorpion FLS980 Series III offers higher accuracy and faster probing speeds than previous models.
Finetech to Exhibit the Ideal Blend of Performance and Cost Rework Technology at the 2013 IPC APEX EXPO
Finetech will highlight the FINEPLACER core rework system in booth #1205 at the upcoming IPC APEX EXPO, scheduled for February 19-21, 2013 at the San Diego Convention Center in California. The FINEPLACER core offers proven rework technology for a wide spectrum of SMT components, ranging in size from 0201 to 70 x 70 mm BGAs, and handling PCBs up to 310 x 400 mm.
GPD Global to Demonstrate World-Class Dispensing Systems at the IPC APEX EXPO
GPD Global, a manufacturer of precision fluid dispensing systems for high-volume 24/7, low-volume/high-mix and R&D production, will exhibit in Booth #2633 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. Live demonstrations will be given for a number of systems from the company's dispensing line.
Microscan to Demonstrate AutoVISION 2.0 Next-Gen Simplified Machine Vision Software at IPC APEX
Microscan will demonstrate AutoVISION 2.0, its latest generation of machine vision software in booth #1239 at IPC's APEX EXPO, scheduled to take place at the San Diego Convention Center, February 19-23, 2013. AutoVISION 2.0 combines a simplified user interface with a powerful toolset for inspection, error proofing, and identification of components, boards, and assemblies.
Seika Machinery to Showcase Storage Cases and Equipment at the IPC APEX EXPO
Seika Machinery will showcase its proven, advanced machinery in booth #2727 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. Seika Machinery will showcase its McDry PCB Storage Cabinet and McDry MB-301 Low Temperature Baking Cabinet.
KIC to Highlight the ProBot Automatic Profiling System at the IPC APEX Expo
KIC today announced that it will showcase the ProBot, a flexible, affordable and easy-to-use automatic profiling system in booth #1314 at the upcoming IPC APEX Expo, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. The ProBot automatically verifies whether each PCB is processed to specification in the reflow oven.
BPM Microsystems Demonstrate Breakthrough Programming Solutions At IPC APEX
BPM Microsystems will demonstrate its breakthrough programming solutions in booth #108 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California.
Apex Factory Automation To Show Mirae Placement Solutions At IPC Apex
Apex Factory Automation will be highlighting their newest SMT placement systems for high-mix, high speed applications. Mirae produces the linear motor based systems. Their features and capabilities will be demonstrated live at booth #1117. The Mx400 Series feature advanced linear motor technology providing speed and placement accuracy of 25µ. These flexible SMT assemblers are capable of placing 01005's (0402 metric) through 3.5" X 1.18" (90mm X 30mm) large SMT devices using advanced optics and inspection systems.
Count On Tools to Introduce Expanded Series of StripFeeder .mod Kits and Accessories at the IPC APEX Expo
Count On Tools will be exhibiting in booth #746 at the upcoming IPC APEX Expo, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. New product lines to be showcased at the event include: The expanded series of StripFeeder .mod kits and accessories as well as the expanded line of ezLOAD modules.
ViTrox Technologies to Debut New Capabilities of the Prized V810 X-Ray Inspection System at the IPC APEX EXPO
ViTrox Technologies is exhibiting in Booth #2707 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. The company will highlight the V810 X-Ray inspection system with the new Phase Shift Profileometry, a ViTrox patented technology for warpage compensation and 100 percent through-hole component PCBs.
GOEPEL Showcase Support Opportunities To Track Down Test Problems At Southern Manufacturing
At Southern Manufacturing & Electronics Exhibition in Farnborough GOEPEL electronics will demonstrate its extensive portfolio of solutions for electronic and optical test and inspection. On Stand D62 the company will demonstrate the systems impressive capabilities, including showing how a 360° operation camera and sophisticated Embedded System Access electronic test instruments can help to track down problems on today's dense and complicated electronic boards.
ACD to Exhibit World-Class PoP Assembly and Test Services at the IPC APEX EXPO
ACD is exhibiting in Booth #817 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. ACD's assembly business model is geared towards supporting high-mix, high-technology assembly from prototypes through low-to-mid volume production.
Computrol To Exhibit Enhanced Manufacturing Capabilities At IPC APEX 2013
Computrol has today announced that it will exhibit in Booth #2532 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. Computrol has made a number of equipment purchases since the last IPC APEX EXPO and company representatives will be on hand at the show to discuss the company's enhanced capabilities.
Make an Appointment Now to Meet with the Inspection Experts at Nordson DAGE during the IPC APEX EXPO
Nordson DAGE announces it will exhibit in Booth #2915 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. Attendees are encouraged to make an appointment and bring a sample to Nordson DAGE's inspection experts.
Sono-Tek Corporation to Exhibit SonoFlux Servo Dual Flux System for Rapid Changeovers at the IPC APEX EXPO
Sono-Tek Corporation will present its SonoFlux Servo Dual Flux ultrasonic spray fluxing system in booth #3400 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California.
Inovaxe To Show Latest Storage And Handling Systems At APEX 2013
Inovaxe has today announced that it will exhibit its latest storage and handling systems in Booth #3248 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California.
Kyzen to Highlight Its Newest Electronics Assembly Aqueous Solution at the IPC APEX EXPO
Kyzen is highlighting the new AQUANOX A4639 Electronic Assembly Aqueous Solution in Booth #1401 at the upcoming IPC APEX Expo, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California.
OK International to Debut Metcal’s MX-5200 for the First Time at the IPC APEX EXPO
OK International is debuting the new Metcal MX-5200 Soldering, Desoldering and Rework Series in Booth #735 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. The system offers the same increased productivity and process control as the MX-5000 Series, now with dual-simultaneous ports.
Silicon Labs To Showcase Mixed-Signal Innovations At Embedded World 2013
Silicon Laboratories has today revealed that it will be showcasing an array of embedded mixed-signal products and development tools at Embedded World in Nuremburg, Germany, February 26-28 at Booth 4A-211. Embedded World provides a world-class venue to demonstrate silicon solutions and development tools that simplify the embedded design process.
