|
Search
|
DC / DC
500W Enclosed DC-DC ConverterMEAN WELL has introduced the new SD-500 series (500W) enclosed type DC/DC converter that expands our SD product lines to higher wattage range for the growing demand of high wattage DC/DC applications. After this, our DC/DC enclosed type product line would be complete and become one of the few manufacturers that can provide from 15W, 25W, 50W, 100W, 150W, 200W, 350W, 500W, to 1000W. The whole product line will consist of 9 families and totally 78 models.
High Reliability DC/DC Converters From PowerstaxPowerstax has announced the introduction of a new range of high reliability and MIL specification DC:DC converters with up to 50W of output power. Available immediately, the new PX series offers a wide variety of versatile, compact, highly specified modules at very competitive prices that will meet many different customer requirements including Military and Avionics. COTS 15 and 30 watt DC-DC converter modulesAdvanced Power Components has announced the introduction of three new products to VPT's COTS product line, the "VPT Series". The new 15 watt and 30 watt modules satisfy the US Department of Defense's "Commercial-off-the-Shelf" directive in terms of low cost, high performance, and satisfaction of stringent military and avionics industry requirements. Advanced Power Components announces additional VPT modules now included on DSCC Standard Microcircuit DrawingsAdvanced Power Components PLC is pleased to announce that the US Defense Supply Center Columbus (DSCC) has issued new Standard Microcircuit Drawings (SMDs) for its range of VPT DVFL 120 watt DC-DC power converters. This designation simplifies the procurement of high reliability DC-DC converters for US Department of Defense (DoD) programmes specifying avionics, military, and space qualified components.
Modular DC/DC Converter StacksThe D1000 power conversion system is part of the market leading Flexistax DC/DC module series. It has been developed specifically for applications where standard off-the-shelf solutions do not exist. This field proven modular solution offers customers a faster time-to-market, reduced capital investment and minimises the risk often associated with custom designed power supply requirements.
Powergood offers New 4:1 Input Version and Pinned Version for SMD Converter SeriesPowergood has added two new 4:1 input models to their high efficiency ESM Series. The ESM brick (1.87"x 1.16" footprint) parts are capable of delivering up to 35W of output power, or up to 10A of output current at lower output voltage. The low-cost devices are designed to operate efficiently over a 4:1(2:1) input range of 18 to 75 VDC, facilitating their employment on boards with industry standard bus voltages of 24V, 48V or 60V. Notably, their ultra-wide input range permits the use of single power system designs, which are capable of operating in an extensive array of environments. The Series is RoHS compliant and withstand a basic isolation voltage from input to output of 2250VDC. Now, ESM modules have pinned version option, are aimed at customers who do not require surface-mount modules and prefer conventional, through-hole assembly methods.
I2C Controlled 4-Output Synchronous Step-Down DC/DC ConverterLinear Technology has announced the LTC3562, a quad channel, high efficiency, 2.25 MHz, synchronous buck converter that can deliver dual 600mA and dual 400mA continuous outputs from a 3mm x 3mm QFN package. Using a constant frequency current mode architecture, the LTC3562 operates from an input voltage range of 2.7V to 5.5V, making it ideal for single cell Li-Ion/polymer, or multicell alkaline/NiCad/NiMH applications. DC-DC Converters for military and aerospace applicationsAdvanced Power Components has announced the introduction of a new line of COTS DC-DC converter and EMI filter families. Manufactured by VPT Inc., the American leader in providing power handling products, the new series of converters and filters, initially comprising 15 modules, brings high performance, high reliability solutions at a lower cost to designers of aircraft, vehicles, and weapon systems.
Isolated 2W single output DC/DC Converter from Murata Power SolutionsThe NMK series of isolated 2W single output DC/DC converters from Murata Power Solutions provides industry leading performance in a small footprint, pin compatible, industry standard SIP package that allows easy drop-in replacement of other devices. The NMK series also provides a straightforward power upgrade path from Murata Power Solutions' existing 1W NMV series.
Half-brick DC-DC converters from LambdaLambda has expanded its half-brick DC-DC converter line-up with the introduction of the new iHG series. Providing exceptional thermal performance, using the industry standard half-brick footprint with no base plate, these modules are ideal for engineers designing low airflow, high temperature, 48V power architectures, for telecom, wireless, industrial and many other applications. The initial product offering within the iHG family includes 5V/10A, 5V/20A and 3.3V/30A devices, with further products planned.
4:1 Input 1/16 Brick DC/DC Converters For Telecom, Datacom and Medical ApplicationsThe Small Tech. Research Group has announced the new EST Series of isolated DC-DC converters to their growing portfolio of isolated DC-DC converters for high-speed networking, telecommunications, and computing applications. The 1/16 brick (1.3"x 0.9" footprint) parts are capable of delivering up to 50W of output power at higher voltages, or up to 20A of output current at an output of 1.8VDC. The low-cost devices are designed to operate efficiently over a 4:1(2:1) input range of 18 to 75 VDC, facilitating their employment on boards with industry standard bus voltages of 24V, 48V or 60V. Notably, their ultra-wide input range permits the use of single power system designs, which are capable of operating in an extensive array of environments. The Series is RoHS compliant and withstand a basic isolation voltage from input to output of 2250VDC.
60W DC/DC Converters feature high efficiency and high power densityLeading power solutions specialist Powersolve announces the TRACOPOWER TEN-60 series of high performance DC/DC converter modules. They feature wide 2:1 input voltage ranges with efficiency levels of up to 90% that allow an operating temperature range for the modules of -40º to +85ºC.
Miniature DC/DC Converters with Wide Input RangesPower Sources Unlimited announces that over 80 models of the TMR Series, wide input dc/dc converters are available in an ultra compact, encapsulated SIP package.
Vicor adds 24V input DC/DC convertersThe Brick Business Unit of Vicor Corporation has announced the addition of a 24 V input series for both its VI-J00 and VI-200 families of DC-DC converters. With a wide input range of 10 to 36 V, the modules are targeted for applications operating from 12 V or 24 V inputs. The low-noise ZCS topology greatly reduces the design effort and filtering costs required for power converters to meet agency conducted emissions requirements. Line Conditioning Module For Military DC/DC Power SystemsAdvanced Power Components PLC has announced the introduction of a new pre-conditioning power module manufactured by VPT Inc., the American leader in providing power handling products.
DC/DC converters support DDR Memory applicationsMurata Power Solutions has introduced two new small form-factor point-of-load (POL) DC/DC Converters that deliver high-efficiency and high current density for powering DDR1, DDR2 and DDR3 memory, as well as general purpose ICs in multiple applications.
600W Half Brick DC/DC for IBA ApplicationsSynQor has announced the release of the PQ60120HZA50 DC/DC converter. This half brick sized device, measuring just 2.40 x2.30 x0.413in in open frame format, offers a regulated output of 12V up to a maximum rating of 50A from the full Telecom input voltage range of 35-75V. Targeting Intermediate Bus Architectures (IBA), the device offers the highest output power currently available in the marketplace for a half brick device.
Sixteenth brick modules reduce manufacturing costsEricsson Power Modules has released a surface-mount version of its successful PKU series of DC/DC converters. The PKU-SI uses proprietary Ericsson technology that meets all assembly and environmental requirements while contributing to lower total cost of ownership. Addressing the market for smaller power supplies, particularly for highly integrated systems in a broad range of applications in telecom and datacom equipments, Ericsson Power Modules has released the PKU4510 SI 48Vin/ 3.3V/15A 50Wout, PKU4511 SI 48Vin/ 5V/10A 50Wout and PKU4515 SI 48Vin/ 15V/3.3A 50Wout.
700W DC/DC Brick Delivers 126W/Cubic InchPower-One has introduced the FBA48T25280 DC-DC converter, providing a 25A, user-adjustable 16.8 – 32.2V output. This full brick combines high efficiencies (exceeding 92%) with advanced thermal management techniques to deliver 126W/cubic inch power densities and reduced current deratings in elevated ambient temperature RF amplifier applications.
10A DC/DC regulator systemLinear Technology has introduced the LTM4600HVMPV, a complete and encapsulated 10A switching DC/DC regulator system, the first device in a new family of uModule DC/DC regulators designed for rugged military and avionics applications. The LTM4600HVMPV is fully tested over the temperature range of -55°C to 125°C. This device is offered in a 15mm x 15mm x 2.8mm Military Plastic LGA (Land Grid Array) package. The compact LGA package has been qualified by military system designers as the preferred package for high power DC/DC solutions because of its lower thermal impedance when compared to a similar size BGA (Ball Grid Array) package. Comprised entirely of Linear Technology silicon and supported by our rigorous in-house testing, the LTM4600HVMPV brings component-level reliability and industry-leading performance to demanding applications such as military and aerospace systems.
Full-brick DC/DC converter is a ‘drop-in’ replacement for new and old 24 V input designsEricsson Power Modules' DC/DC converter platform for RF power amplifier applications utilizes the industry standard full-brick format and footprint, making it an excellent drop-in replacement that offers enhanced performance. The device, aimed at the telecoms market and customers developing base transceiver stations in cellular radio networks where high efficiency and reliability are required, is also ideal for many other applications, such as cooling fan trays.
1000W Single Output DC-DC ConverterMEAN WELL has introduced the SD-1000 series enclosed type DC/DC converter. Featuring 4:1~2:1 wide DC input range and 2000VAC input/output isolation, th SD-1000 series have two kinds of DC input level – 19~72V(L type), 72~144V(H type) and three kinds of DC output level – 12V, 24V, 48V for end users to select from. With built-in short circuit, overload, over voltage and over temperature protections, these 1U low profile converters are suitable for general electrical engineering usage, automotive, and battery back-up applications which have space constraint and required a compact DC/DC power solution. Other standard function includes 12V/ 0.25A auxiliary output, output OK signal, remote ON/OFF control, and remote sense function that can fit in with many possible special end applications.
DC/DC converters from XP achieve 20% footprint reduction and maintain industry standard DIP-24 pin-outXP Power has announced its JCA series of miniature, board-mounted low power DC/DC converters. Measuring just 25.4 x 20.3 x 10.0 mm (1 x 0.8 x 0.4 inches), the device's shielded metal package is 6.4 mm (0.25 inches) shorter than the 31.8 mm (1.25 inch) industry norm. Using the customary 24-pin DIP layout, the units occupy 20% less printed circuit board area than traditional products. This allows designers to reduce the size of new developments or add in more features, while maintaining the industry standard pin-out makes the converter an ideal drop-in replacement for existing designs.
Eighth Bricks from Power-One deliver best-in-class elevated temperature performancePower-One introduces SQE48T Series eighth-bricks providing single outputs of 1.2V @ 50A, 1.5V @ 40A, 1.8V @ 40A, and 2.5V @ 40A. Best-in-class efficiencies and thermal-management techniques deliver elevated-temperature performance that exceeds most currently-available similar-amperage quarter bricks. These through-hole-mounted DC-DC converters provide industry-standard DOSA footprints and are available with both six-substance and lead-solder-exempted RoHS compliances.
Tiny 15W DC/DC Converters from Powersolve feature high performanceLeading power solutions specialist Powersolve announces the TRACOPOWER THN-15 series of high performance DC/DC converter modules. They provide up to 15W output power from an encapsulated, shielded metal package with dimensions of only 1.0x1.0x 0.4in. According to Powersolve's Managing Director Peter Clark, the THN-15 series sets a new benchmark for isolated 15W converters.
DC/DC Converters Offer Choice of Inputs and Packaging/MountingSchaefer, Inc. has introduced the C300 and B300 Series' of 150W DC/DC Converters, AC/DC Power Supplies, and Battery Chargers. The C300 DC/DC product line boasts 7 DC input ranges of 10-16V, 18-36V, 36-75V, 45-90V, 80-160V, 160-320V, and 320-380V with 10 single output voltages ranging from 5VDC to 220VDC. The C300 AC/DC Series offers the same range of output voltages from a choice of 110VAC, 230VAC, or 115-230VAC inputs. The BP200 Series of Battery Charges provides output voltages ranging from 12VDC to 290VDC. Requests for custom output voltages are easily accommodated.
15w DC/DC Converter In Small PackagePower Sources Unlimited has added to its high performance DC/DC converter offering with the Tracopower THN-15 and THN-15WI Series' of 15 Watt modules. These converters feature either a 2:1 input or a 4:1 input with tightly regulated, isolated, adjustable, single outputs of 3.3VDC, 5VDC, 12VDC, or 15VDC.
24V Input Eighth-Bricks from SynQor feature High EfficiencySynQor has announced the release of a new range of isolated DC/DC converters targeting the industrial marketplace as part of the ongoing expansion of its InQor product range. The IQ24-EGA series of industry standard Eighth-Brick devices operate over an input voltage range of 18-36V and provide up to 25A, or 75W of output power. The available output configurations include 1.8V/25A; 3.3V/20A; 5V/15A; 7V/10A; 12V/6A; 15V/5A and 24V/3A.
Ultra-wide input 15W DC/DC converter in a 50 x 25 mm packageXP Power has announced its JTH15 series of 15W DC/DC converters. Fitting into a metal cased compact 50.8 x 25.4 mm (2 x 1 inch) footprint, they are suited to low power, board mounted designs. The series can accommodate a wide 4:1 range of input voltages, from 9 – 36 VDC or 18 – 72 VDC. Both single and dual output versions are available. The single output device is available with +3.3, +5, +12 or +15V rails, while the dual version has +/-5, +/-12 or +/- 15 outputs.
DC/DC converters protect processorsMurata has expanded its range of power supplies with the introduction of the MPDRX series of ultra high speed response DC/DC converters. Specifically designed for use with high speed, yet sensitive circuitry, these innovative, yet cost effective devices take advantage of Murata's advanced design and high-density packaging technologies.
Ultra Miniature 15W DC/DC ConverterSpecialist power conversion distributor, PIV Technology, has introduced a tiny15Watt DC/DC converter. The new RP15 – xxxx SA(W) series from Recom International offers ultra-miniature dimensions with very wide input voltage ranges. Until recently the industry standard size for a 15W DC/DC converter module was 1.6 x 2 (40.6 x 50.8mm) and is currently at 1 x 2 (25.4 x 50.8mm), the new RECOM standard is 1x1 (25.4 x 25.4mm) with a height of 0.39 (10mm).
Very small 20W DC/DC ConvertersPowersolve has announced the Traco TEN20WIN Series of 20W DC/DC converters which will find wide application in areas such as telecoms, datacoms, industrial process control systems and portable battery-operated equipment.
Quarter Bricks offer efficiencies up to 94% under all load conditionsDelivering very high operating efficiencies over a wide range of load conditions, the TDK Innoveta iQE Series of Quarter Brick DC-DC converters from Lambda responds to the ever increasing demand for improved efficiency under all normal operating load conditions. With a broad range of output voltages from 3.3 to 15V and providing high power ratings, these DC-DC converters are ideal for engineers seeking excellent efficiency and optimal thermal performance for 24V and 48V power architectures in many applications within the industrial, telecommunications, data communications, access and wireless markets.
24V Output Eighth-brick DC/DC ConverterSynQor has announced an addition to its eighth-brick range of DC/DC converters. The PQ60240EGL03 delivers a tightly regulated 24V output at up to 3A in the DOSA standard 0.9 x 2.3in footprint and pinout. Operating over the input voltage range of 35-75V, the open frame device offers an efficiency of up to 90%. Due to the optimised topology and layout of the device, derating is minimal, even with low levels of forced air cooling. At less than 0.35in (8.9mm) high, the unit is particularly suitable for wireless telecom applications utilising very small board pitches, wireless data transmission equipment, fan trays, and any application where a 24V rail needs to be generated in a 48V environment.
40A quarter bricks now with 4:1 input rangeNu Horizons Electronics has ex-stock availability of the SynQor IQ18xxxQTAxx family of 40A /100W DC/DC converters. With a 4:1 input range from 9-36V, inventory is minimized because the converters are equally suited to use on 12V or 24V input systems. There are nine different models with single outputs ranging from 1.8V to 48V and all come in an industry-standard 2.3 x 1.45in (quarter brick) package with standard pin-out.
Quarter Brick DC/DC ConvertersSynQor has announced the release of the IQ36xxxQTA family of Isolated Quarter Brick DC/DC Converters. While targeting predominantly the Railway & Transportation industry, the devices will also suit a variety of other applications due to the ultra wide 4:1 input voltage range of 18-75V. By adding this 36V nominal input device to the InQor family of Industrial DC/DC converters, SynQor now offers a complete suite of quarter brick products for Railway applications required to operate from a nominal 24V, 36V, 72V or 110V input. Each individual voltage range is designed to meet the respective input requirement of EN50155 including associated transients.
Ericsson’s POLA modules said to improve performance and save board spaceEricsson Power Modules' PMN and PMP series point-of-load modules, based on the latest generation of high dynamic-response control IC with embedded TurboTrans functionalities, are third-generation POLA products. As point-of-load (POL) power modules, they address a wide range of applications – from industry to avionics – including applications in the Information & Communication Technology (ICT) industry.
DC/DC Converter For High Power Vehicle ApplicationsThe D1000 modular power solution from Powerstax offers up to 1000W of DC power from vehicle or other mobile or static DC power sources. Powerstax, the Farnborough UK based designer of application rich power solutions, developed the D1000 to meet growing market demands for military, industrial and commercial communications and control systems powered from vehicle batteries or telecom supplies.
Sixteenth brick DC/DC power modules provide up to 25ALambda UK has strengthened its iSA series of sixteenth brick DC/DC power modules to provide up to 25A of output current. Designed by sister company TDK Innoveta Inc, the new DOSA (Distributed Power Open Standard Alliance) standard footprint DC/DC converters provide exceptional thermal performance and are designed for engineers seeking to save space and system cost in 48V distributed power architectures.
18-36V Input Quarter Bricks from SynQorSynQor has announced its IQ24-QTA family of isolated DC/DC converters to specifically address Industrial & Medical Applications. The new family of 18-36V input products offers up to 120W or 40A in the industry standard 2.30 x 1.45in quarter brick footprint and pinout, at up to 93% efficiency.
Eighth-brick DC-DC converters provide up to 93% full load efficiencyEmerson Network Power has launched four Artesyn eighth-brick DC-DC converters featuring second-generation power conversion topology that provides up to 93% full load efficiency. The latest additions to the Artesyn LES series of converters offer designers a choice of 22 A @ 2.5 V, 20 A @ 3.3 V, 13 A @ 5 V and 6.7 A @ 12 V.
Dual-channel power platform is efficient and versatileJust announced by Aspen Electronics is a highly versatile, general purpose DC power supply, ideal for a wide range of R&D, production test and instrumentation applications. , manufactured by GW Instek, is the first model of the company's newly designed, state-of-the-art power supply platform. It offers 375W of output power, three isolated outputs and dual channel mode operation.
DC-DC converter designed for harsh environments offers wide input voltage rangeXP Power announces availability of a new series of isolated dc-dc converters. The MQP120 range has been specifically designed for systems that need to be powered from both 12 VDC, 24/28 VDC electrical supplies. The unit is ideally suited to military equipment that might be deployed in both army and commercial vehicles, such as those used for homeland security initiatives. The converter accommodates a wide range of input voltage, from 9 to 40 VDC, and is rated to 120W. Five standard output options are available, giving voltages of 3.3, 5, 12, 15 and 24 VDC.
Sixteenth-Brick Provides up to 92% EfficiencyPower-One has introduced the SSQE48T20033, a 3.3Vout, 20A, sixteenth-brick. This competitively-priced, isolated DC-DC converter boosts power density up to 56 watts per square inch while increasing efficiency to well above 90% in communications, data server/storage, and workstation applications.
4:1 WIDE RANGE INPUTS MAKE CONVERTERS EVEN MORE VERSATILETo further increase the versatility of its popular and competitively priced PXF series of DC/DC converters, Lambda has now introduced models with a 4:1 input voltage range. Benefits include the opportunity for users to reduce inventory, since the same device can now be used for many different applications, and the suitability of the new products for use in systems where the input voltage varies widely, such as battery powered systems.
LOW PROFILE SMD POINT OF LOAD CONVERTERS FEATURE ADJUSTABLE OUTPUTSJust 4.5mm high, the latest CE-10xx range of low-profile surface mount, non-isolated point of load DC/DC converters designed and manufactured by TDK are now available from power supply specialists, Lambda under the new collaborative TDK - Lambda product brand. The CE series offer output voltages that can be set by the user, enabling a small number of types to cover a wide variety of application requirements. Their wide input voltage range further enhances the versatility of these products, which are aggressively priced.
NOW LAMBDA HAS ALL THE CONVERTERS YOU’LL EVER NEED!Power Supply expert Lambda now provides a truly comprehensive range of products with the addition of the TDK Innoveta family of DC-DC converters following Lambda's acquisition by TDK last year. These industry leading products combine high efficiency and reliability with competitive pricing, and are available in versions ranging from DOSA packaged point of load converters rated from a few tens of watts to the 'full brick' delivering a market leading 700W.
LAMBDA NOW OFFERS TDK DC/DC CONVERTERSThe latest CC-E compact DC/DC converters designed and manufactured by TDK are now available from power supply specialists, Lambda under the new collaborative TDK – Lambda product brand. With power ratings from 1.5W to 25W in versions with 5V, 12V, 24V or 48V inputs, the DC/DC converters feature a small footprint and low profile, making them an ideal choice for use in modern telecommunications, data communications, instrumentation and industrial applications, where space is invariably at a premium.
LAMBDA PACKS 450 WATTS INTO HALF A BRICKIn response to customer demand for smaller and more cost-effective power sources, Lambda has introduced its innovative new range of PAH450 DC/DC converters that deliver a full 450 watts of output power from an industry-standard low-profile half-brick package. In many applications, these compact and economically priced units can replace full-brick converters, resulting in substantial space and cost savings.
NEW SURFACE MOUNT POL CONVERTERS HAVE WIDE-RANGE INPUTSIdeal for point-of-load use, surface-mount DC/DC converters in the new CE-1050 range from Lambda feature the exceptionally wide input voltage range of +9.0 to +26.4V. By directly accepting nominal 24V inputs, rather than the maximum of 12V normally associated with devices of this type, the new converters simplify power supply system design and reduce costs in a wide range of applications.
SynQor Expands offering for Railway & Transportation ApplicationsSynQor today announces the release of the IQ72xxxQTA series of 72V input Quarter Brick DC/DC Converters, targeting Railway & Transportation Applications to compliment other recently announced 110V devices for this market place.
Pinned version DC/DC module is fully compatible with previous platformOffering users a pinned version of its MacroDens PKR DC/DC module, Ericsson Power Modules' PKR-PI is based on the same proprietary, market-leading, board-to-board technique that was developed to reduce the amount of molding. The technique also makes the products more environmentally friendly, easier to recycle at end-of-life, and they are fully compliant with all relevant standards and regulations. This means the PKR-PI (pin version) is an evolution of this latest platform, offering downgrade compatibility and full interoperability with the original through-hole version of Ericsson's MacroDens PKF module.
4:1 Wide Input, Highly Efficient 100W Quarter Brick DC/DC ConvertersToday's advanced digital systems demand extended input range compliance on DC/DC power converters. Besides battery and mobile power applications, the ultra wide 4:1 input range of C&D's advanced UQQ family of converters perfectly suits industrial, medical and telecom applications and is capable of supplying up to 100Watts of usable power. Available models are 3.3V/25A, 5V/20A, 12V/8A, 15V/7A and 24V/4A with basic grade I/O isolation voltage of 2250 Volt.
SynQor Introduces DC/DC Converters for Railway & Transportation ApplicationsSynQor today announces the release of the IQ1B series of 110V input Quarter Brick DC/DC Converters, targeting Railway & Transportation Applications. The wide input voltage range of 66-160V more than covers the requirements of EN50155 for both steady state and transient voltage conditions. A broad range of output voltages are available, with a maximum power level of 150W in the industry standard 2.30" x 1.45" quarter brick package size. Available output voltages are 1.8V/40A; 3.3V/30A; 5V/25A; 7V/20A; 12V/12A; 15V/10A; 24V/6A; 30V/5A and 48V/3A. Efficiency is as high as 91%.
Vicor Announces MIL-COTS 28 V DC-DC V•I Chip ModulesVicor announces the availability of MIL-COTS 28 V DC-DC V•I Chip modules. This new product line consists of a 28 Vdc input PRM™ regulator and a family of VTM™ current multipliers with output voltages from 1 to 50 Vdc. The PRM and VTM chipset provides the full functionality of a DC-DC converter with high efficiency and higher power density, fast transient response, low noise, and flexible thermal management. With each module weighing only 15 grams and measuring just 32.5 x 22 x 6.6 mm, the chipset offers specific advantages for designing power systems in mission-critical portable and airborne applications.
Low Cost, High Isolation 2W DC/DC ConvertersAvailable immediately from MicroPower Direct, the A200EHI series is a miniature series of 2W DIP converters is specifically designed to provide miniature packaging, ultra-high input/output isolation and low cost. Features include 6,000 VDC isolation, safety approvals, RoHS compliance, high efficiency and single & dual outputs. As part of MPD's Budget Saver series of products, they are offered at very low prices.
1 x 2 In 30W DC/DC ConverterAvailable now from MicroPower Direct, the B3000RW series provides 30W of isolated, tightly regulated output power in a compact 1 x 2 x 0.4 inch case. These high power density converters are an ideal choice for a wide variety of board level applications in which space is limited but a high performance power converter is required. Standard features include a wide input voltage range, tight line/load regulation, overvoltage protection, low output voltages (2.5V & 3.3V) and compliance to EN55022 Class A.
High Efficiency Full Brick for RF Power Amplifier ApplicationsSynQor announced the PQ60280FTx26 series of Isolated Full Brick DC/DC Converters, targeting RF Power Amplifier (RFPA) applications within cellular radio infrastructure equipment. In this demanding area, efficiency and reliability are key attributes in which the SynQor module excels, with >94% efficiency at full load, and a calculated MTBF of > 2Mhrs (Telcordia).
110 V Input Supplies for Railway and Transportation ApplicationsVicor has announced the introduction of a 110 Vdc input series of 24 models of Maxi, Mini, and Micro DC-DC converters. This new series includes eight standard output voltages (3.3, 5, 12, 15, 24, 28, 36, 48 V) in combination with three different package sizes (quarter brick, half brick, full brick) with output power ranging from 50 W up to 400 W, depending on the model.
24-pin DIP DC/DC convertersPower Sources Unlimited has announced the Tracopower THB3 Series of 24-pin DIP DC/DC converters designed for a variety of applications in the medical or information technology industries where high isolation is required. 2:1 input ranges from 4.5VDC to 75VDC are offered with single or dual outputs of 5VDC, 12VDC, 24VDC, +/-12VDC or +/-15VDC. The THB3 Series is rated for an input to output isolation of 4000VA rms and has been tested for 1 second to 6000Vpk. The design provides supplementary and reinforced insulation for working voltages up to 300VAC.
DC/DC converter helps reduce energy consumptionBased on an open-frame design with one side populated and utilizing a board-to-board technique, Ericsson Power Modules' PKD-E DC/DC converter is fully interoperable with the original lead-free PKD series introduced in 2000. The platform shift from ceramic hybrids to board-to-board helps to lower lifetime cost and reduces energy consumption during manufacturing at Ericsson Power Modules, as well as at CEMs when assembling the modules onto customers' boards.
1U high DC/DC bus converters give 1000W of total powerUNIPOWER's TPCMQ24 series DC/DC bus converters convert 24VDC to either 48 or 54.4VDC for a variety of applications including industrial and telecommunications. Output current is 20.8A at 48V or 18.4A at 54.4V, giving 1000W of total power. These converters operate from a wide range 20 to 30VDC (24V nominal) input with an efficiency of 89% and power density of 12.5W/in³.
Reliable Half-Brick withstands a 100V, 100ms TransientPower-One has announced its 300W HBC48T25120 isolated DC-DC converter. This 9.6 to 13.2 Vout half-brick utilizes a robust design that facilitates an 8.7 Million Hour MTBF, the capability to withstand a 100V transient for 100ms, and operation over a -40 °C to 85 °C ambient temperature range.
375Vin DC/DC Mini ModulesVicor has announced the addition of eight mid-power Mini DC-DC converters to the 375 Vdc input family: a 100 W model at 3.3 Vout; 150 W model at 5 Vout; and 200 W models at 12, 15, 24, 28, 36, and 48 Vout. These half-brick modules — which incorporate Vicor's patented low-noise Zero-Current and Zero-Voltage Switching (ZCS/ZVS) —can be used in a variety of applications, including off-line systems with autoranging or PFC front ends, industrial and process control, distributed power, medical, ATE, communications, defence, and aerospace. Low-noise ZCS/ZVS greatly reduces the design effort and filtering costs required for power converters to meet agency conducted emissions requirements.
4:1 Input Voltage Devices Cover 12V and 24V Bus SystemsSynQor has announced the release of a range of isolated Quarter Brick DC/DC converters to address industrial, medical and telecom applications running from a 12V and/or 24V bus (operating range is 9-36V). Single output voltages offered range from 1.8V to 48V (with nine different models available), and are capable of supplying up to 40A or 100W of usable power.
Miniature SIP packaged device is world’s smallest safety approved 1W DC/DC ConverterC&D Technologies has extended its NMJ series of low power DC/DC Converters to include eight new single output models. The devices are the world's smallest UL60950 safety standard approved 1W converters. The NMJ series is housed in fully encapsulated, UL 94V-0 rated, 7-pin SIP packages with a footprint of just 1.91cm2, making them ideal for use in applications that demand a miniature, safety approved solution.
D100ER Series - Low Cost 1W, tightly regulated SIP DC/DC convertersNew, very low cost 1W SIP DC/DC converter provides a single, tightly regulated output. Packaged in a miniature SIP case, these units are part of our Budget Saver product line
DC/DC Converters for Industrial MarketSynQor has announced a range of Quarter Brick sized DC/DC converters to address Industrial Applications running from a 12V bus (operating range is 9-22V). Single output voltages offered range from 1.8V to 48V (with nine different models available), and are capable of supplying up to 40A or 100W of usable power. Housed in the industry standard 2.30 x 1.45in Quarter Brick footprint and pinout, the IQ12xxxQTAxx family of devices are available as open frame units for convection-cooled applications; with baseplates for conduction-cooled applications; and for the first time, fully encapsulated for harsh environment applications.
Dual output DC/DC converters power telecom and datacom transmission systemsExpanding its MacroDens portfolio of DC/DC modules, Ericsson Power Modules has released three PKR modules aimed primarily at powering telecom and datacom transmission systems requiring floating dual outputs, such as line cards and optical transmitters. Similarly, the PKR will also power a wide range of applications in instrumentation and process control that use analogue logic and communication chipsets. With their floating design, the devices' dual outputs can also be configured in series, making them suitable for feeding many other applications (for example, 24V output).
Vicor Expands its family of 300V Input Mini ModulesVicor has announced the addition of nine mid-power Mini DC-DC converters to its 300Vdc input family: 100 W models at 2 and 3.3 Vout, 150 W models at 5, 12, 15, 24, 28, 36, and 48 Vout. The modules — which incorporate Vicor's patented low-noise Zero-Current and Zero-Voltage Switching (ZCS/ZVS) —can be used in a variety of applications, including off-line systems with autoranging front ends, industrial and process control, distributed power, medical, ATE, communications, defence, and aerospace. Low-noise ZCS/ZVS greatly reduces the design effort and filtering costs required for power converters to meet agency conducted emissions requirements.
Single Output 2W DIP DC/DC Converters Feature Very Wide Temp RangeAvailable from MicroPower Direct, the A200RWT series combines miniature size with industrial strength performance. Featuring a wide input voltage range and miniature DIP packaging, this series is specified for operation over operating temperature range of -55°C to +125°C. Twenty single output models operate from wide 2:1 inputs of 4.5 to 9, 9 to 18, 12 to 24, 18 to 36 or 36 to 72 VDC; providing outputs of 5, 9, 12, or 15 VDC. Miniature DC/DC ConvertersPowerPax has introduced a range of competitively priced, ultra miniature DC/DC converters starting at just 0.25W of output power.
15W open frame DC DC convertersPowerPax has introduced a range of ultra reliable 15W open frame DC/DC converters avaiable on very fast turn around. The units come with a choice of wide range inputs, those being 9 to 18vdc, 18 to 36vdc or 36 to 72vdc.
Enclosed DC DC ConvertersPowerPax has announced the a comprehensive range of enclosed DC/DC converters offering output powers from 15 to 350W. There are seven lines within the range rated at 15 , 25, 50, 100, 200 and 350W. The wide range input input voltage options available to choose from are 9 - 18vdc, 18 - 36vdc and 36vdc - 72vdc with a choice of 5vdc, 12vdc or 24vdc single regulated output voltages.
Surface mount DC/DC convertersPower Sources Unlimited has announced Traco's TES-5 Series of low profile, surface mount DC/DC converters, offering 5W of power in a 1.31 x 0.81 x 0.4in encapsulated package. The TES-5 Series features a 2:1 input range of 9-18VDC, 18-36VDC, or 36-75VDC with single or dual outputs. Input to output isolation of 1500VDC, short circuit protection and remote on/off are standard features. Operating temperature is -40ºC to +85ºC, with full load achieved up to +71ºC.
Compact DC/DC converters for DIN rail and wall mountingAt 100 and 500W, the latest DC/DC converters from Zentro Elektrik extend the existing comprehensive range of converters. The compact DC/DC converters are designed for applications in automation engineering, power supply and power station engineering, in traffic systems and railway in particular, and in mechanical engineering.
Ultra-miniature, 2W Single Output, SMT DC/DC ConvertersNow available from MicroPower Direct, the LF200S series is a family of 2W DC/DC converters in an ultra-miniature SMT case. These converters provide a unique combination of power, performance, miniature SMT packaging and low cost.
DC/DC converters suit radio frequency power amplifier applicationsBringing higher power to its PKJ 4000 series of DC/DC converters, Ericsson Power Modules' PKJ 4316 API is rated at 350W. The fully featured converter offers designers high quality and a cost-effective solution for demanding radio frequency power amplifier (RFPA) applications.
Vicor Expands the Family of Mid-Power 24 Vin Mini ModulesVicor Corporation announces the addition of nine mid-power Mini DC-DC converters to the 24Vdc input family: a 100W model at 3.3Vout, 150W models at 5, 12, 15, 24, 28, 36, and 48Vout. A 200W model at a new standard 36V output has also been added. The modules — which incorporate Vicor's patented low-noise Zero-Current and Zero-Voltage Switching (ZCS/ZVS) — can be used as a cost-effective option in a variety of applications, including industrial or process control, distributed power, medical, ATE, communications, defence, and aerospace. Low-noise ZCS/ZVS greatly reduces the design effort and filtering costs required for power converters to meet agency conducted emissions requirements.
SOLID STATE SUPPLIES CUT LEAD TIMES WITH MILITARY STOCKPILEWhile many "stock items" disappear from warehouse shelves, Solid State Supplies are increasing their stock of the more popular International Rectifier ruggedized hybrid DC-DC converters previously built by M-3 and Advanced Analog.
Quarter brick DC/DC modules from Ericsson offer extra output voltage rangesExpanding its PKM-E series of DC/DC modules, Ericsson Power Modules has introduced a further three models that provide extra output voltage ranges, more current, and more power for telecom and data equipment vendors operating in the areas of distributed power architecture, wireless networks, enterprise networks, access and optical networks, industrial, and the latest generation of ICs.
Sixteenth brick DC/DC converters announced by SynQorSynQor has extended its range of sixteenth brick dc/dc converters by now offering isolated outputs of 5V/12A and 1.8V/25A, with up to 60W of usable power in a 1.17in2 footprint. Using the DOSA standard pinout and footprint, the sixteenth brick footprint uses 43% less board space than eighth brick converters.
D200RU Series - 2W. 4:1 Input SIP DC/DC ConvertersMicroPower Direct, is pleased to announce the release of the D200RU series. Featuring an ultra-wide 4:1 input voltage range, this miniature series of 2W SIP converters provides miniature packaging, tight output regulation, 1,000 VDC input/output isolation and low cost.
Full-brick 700W DC-DC convertersUR has introduced the RFF series of isolated full-brick converters, manufactured by Artesyn Technologies and suitable for use with RF (radio frequency) power amplifiers. The new RFF series of converters comprises five 28V output models, offering a choice of two input voltage ranges and three output current ratings for optimum application flexibility. The range-topping RFF700 model is capable of delivering 25A at 28V (700W), yielding a power density in excess of 7.7 W/cm3.
Front-end power solution for latest telecoms cardsEmerson Network Power, a business of Emerson has announced the availability of a front-end power solution for use on latest-generation telecoms cards. The majority of existing Advanced Telecom Computing Architecture (ATCA) bus converters employ a combination of front-end interface and conversion module, consuming valuable board space. The new Artesyn dual-input ATC210 bus converter is a fully integrated solution that occupies 20-40% less space than competitive solutions.
DC/DC Converter from C&D Tech can power Intel’s next generation processorsThe new VRM11.X family of DC/DC Converters from C&D Technologies has been introduced to provide power to Intel's next generation processors. Comprising six models, the range offers a choice of form factors and power level options to give designers and developers of servers and workstations a high degree of flexibility. Compared to approaches that use custom power supplies, VRM11.X DC/DC Converters offer a low risk, fast time-to-market option.
Fixed conversion ratio isolated DC/DC converterThe EUS34-096 from C&D Technologies is a fixed 5:1 conversion ratio isolated DC/DC Converter. The module is designed for powering multiple downstream, non-isolated point-of-load (POL) converters in Intermediate Bus Architecture applications found in computer and telecommunications equipment.
Eight new mid-power DC-DC converters from VicorVicor has added eight mid-power Maxi DC/DC converters to its 375Vdc input family: a 200W model at 3.3Vout, a 300W model at 5Vout, and 400W models at 12, 15, 24, 28, 36, and 48Vout. The modules — which incorporate Vicor's patented low-noise Zero-Current and Zero-Voltage Switching (ZCS/ZVS) — are appropriate for off-line systems with auto-ranging or PFC front ends in industrial or process control, distributed power, medical, ATE, communications, defence and aerospace applications.
Standard DC/DC converters designed exclusively for defence and avionics applicationsXP Power has announced the MTC series of 5W to 35W DC/DC converters designed as a standard product family exclusively for defence and avionics applications. The MTC is a non-custom converter based on commercial off-the-shelf (COTS) components and is available in 5, 15 and 35 W ratings.
Quarter-brick Converter Saves Cost and Space in IBA ApplicationsC&D Technologies has introduced a new isolated DC/DC Converter that provides a cost and space saving solution for Intermediate Bus Architecture applications in computer and telecommunications equipment. The QUS40-096 has an unregulated output, and a fixed conversion ratio of 5:1 that is maintained between the input and output voltages. The module is housed in a compact, industry standard, quarter-brick footprint package.
DC/DC converters featured in SynQor's latest brochureSynQor has released a new brochure featuring its most advanced DC/DC converter product lines including the most recent Advanced TCA interface module and high power converters. This full colour, twenty-eight page brochure provides text, photographs, and charts thoroughly describing SynQor's high efficiency line of converters.
Vicor Introduces New Mid-Power 48 Vin Micro ModulesVicor announces the addition of six mid-power Micro DC-DC converters to the 48Vdc input family: a 50W model at 3.3 Vout and 75W models at 12, 15, 24, 28, and 48Vout. The modules — which incorporate Vicor's patented low-noise Zero-Current and Zero-Voltage Switching (ZCS/ZVS) — are appropriate for power system applications in distributed power, medical, ATE, communications, defence, and aerospace.
Quarter-brick UCQ series DC/DC Converters provide economical solution with outstanding thermal performanceC&D Technologies has introduced a new series of single output, isolated DC/DC converters that combine excellent performance and low cost in applications such as telecom and datacoms equipment, base stations and embedded systems.
75W Half Brick DC/DC Power ModulesLeading power solutions specialist company Powersolve announces two 4:1 input, half brick, high efficiency, high density DC/DC power modules designed to suit a wide variety of board level power supply applications.
DC/DC Converter Provides up to 30WPowersolve has announced a DC/DC converter that provides very high power density levels – 30W from a 51 x 25mm (2 x 1in) industry standard pin-out package. With efficiencies as high as 88%, the new converters feature a low 5mA input current in standby mode and a wide operating temperature range of –25 to +71°C.
Multiple-Ouput 25W DC/DC Converter For Use In VehiclesDesigned primarily for use in vehicles, the new V104 from Datasound Laboratories is a PC/104 multiple output DC/DC 25W converter with a wide input range of 8 to 30V (>6:1) and is ideal for battery or unregulated input applications or low voltage AC inputs.
IBA Drives Demand For Powerstax 350W DC/DC ConverterGrowth in IBA and automotive applications is driving up demand for the F351"Full Brick" 350W DC/DC converter from Powerstax plc. A derivative of the market leading F501 500W product range, the F351 is a cost effective, high efficiency converter giving system designers added versatility while requiring minimum PCB space.
Rugged 70W-150W DC/DC Converters Feature Wide Input Voltage RangesSchaefer, Inc. has introduced the IEXR and IEHR Series' of rugged 70W-150W dc/dc converters, which are ideal for a variety of applications, including process control, instrumentation and industrial installations.
1W DC/DC Converters with 3-kV Isolation from TITexas Instruments has introduced a 1-W, unregulated DC/DC converter in a miniature package that features 3-kV isolation. The new DCH01 family of plug-in power modules operates from a 5-V input and provides single voltages of 5 V, 12 V, and 15 V and complementary dual-output voltages of ±5 V, ±12 V and ±15 V. The tiny modules are ideal for industrial applications such as data acquisition, motor control, programmable logic control, test and measurement, medical instrumentation and professional audio.
Sixteenth Bricks Provide 95% of Full-Rated Power at 70°C with only 200LFM CoolingPower-One, Inc has introduced the SSQ Series of sixteenth-brick DC-DC converters. Operating from 36-75VDC inputs, three single-output models provide 2.5V @ 20A, 3.3V @ 15A, and 5.0V @ 10A. High efficiencies and advanced thermal management techniques enable delivery of up to 95% of full-rated power at 70°C with as little as 200 LFM of cooling.
Mid-Power 24Vin Micro Modules Combine Performance and Cost AdvantagesVicor had added seven mid-power Micro DC-DC converters to its high-density 24Vdc input family: 50W models at 3.3, 5, 12, 15, 24, 28, and 48Vout. The modules — which incorporate Vicor's low-noise Zero-Current and Zero-Voltage Switching (ZCS/ZVS) — are appropriate for power system applications in industrial and process control, distributed power, medical, ATE, communications, defence, and aerospace.
Step-up DC/DC converter for ultraportable systemsUltraportable systems running from single or dual alkaline, NiMH, or NiCd cells need to boost voltage while conforming to strict requirements for battery life and system size. A low-voltage step-up converter from AnalogicTech maintains high efficiency over the entire output current range, requires no external compensation, and provides true load disconnect (TLD) all in a tiny 2.0x2.1mm SC70JW package.
Efficient 40W DC/DC Converter is RoHS compliantPower Sources Unlimited has introduced the Cincon EC7C Series of 40W DC/DC converters that are fully compliant to the RoHS Directive. An ultra wide 2:1 input allows operation in a variety of mobile, battery powered or DC Power System applications.
High Density DC/DC Converter Range ExpandedVicor has announced the addition of seven mid-power Micro DC-DC converters to the high-density 300Vdc input family: two 50 W models, one at 3.3V and 5V, and five 75W models at 12, 15, 24, 28, and 48V.
Lower-Cost DC/DC Converter ModulesVicor has announced a lower cost option for its high performance line of 2nd Generation DC-DC converter modules and VIPAC Arrays – E-Grade versions. DC/DC converter targets Bluetooth headset and ultra-thin digital camera applicationsAdvanced Analogic Technologies Incorporated (AnalogicTech) has announced the AAT1121, a step-down converter for extremely space-constrained portable applications. Mounted in a tiny TDFN package, the device offers 250mA output current at up to 96% efficiency.
18 to 60V Input Eighth Bricks Provide Full Power at 70°C with Only 200LFM CoolingPower-One has introduced its EMS Series of 1/8th-brick DC-DC converters. Two single-output models deliver 3.3V @ 15A and 5V @ 10A from an ultra-wide 18 to 60V input range. Efficiencies exceeding 90%, combined with advanced thermal management techniques, facilitate industry-leading 70°C performance; only 200LFM cooling is needed for 5Vout full-power operation with either 24 or 48Vin.
Ultra compact RoHS compliant 2W DC/DC ConvertersThe TEL-2/TES-2N series from Powersolve is a new generation of cost effective 2W DC/DC converter modules which comply fully with the upcoming RoHS directive.
DC-DC Converter Family has 6 to 30W Applications CoveredPowersolve has announced a family of Industrial DC-DC converters that will suit a very wide range of applications requiring nominal 12V, 24V or 48V DC inputs. Manufactured by Astec, the new family comprises five series of DC-DC converters with outputs from 6 to 30 W.
SMT Non-Isolated DC/DC Converter has IBA Applications coveredSynQor has announced a DC/DC converter optimized to provide high efficiency, fast transient response, and low output noise in one of the smallest packages in the industry. The NQ10W50PKA07 series delivers a full 7A of output current and is ideal as a low voltage POL converter in Intermediate Bus Architecture (IBA) applications.
40V, 2A, 2MHz Step-up DC/DC Converters Deliver Highly Compact DesignsSemtech's SC4501, SC4502 and SC4502H are current-mode, adjustable frequency step-up (boost) converters with an internal 2A, 40V switch.
DC/DC converters give 15W from a 1 x 1 x 0.4in packagePowersolve announces a new generation of isolated, high performance 15W DC/DC converters in a package that is 50% smaller than competitive products.
Single Output 25A Sixteenth Brick ModulesPowersolve announces TDK's Belleta® iSA series of single output, 25A sixteenth brick DC/DC converters designed for a variety of applications where power output, size and thermal considerations are key. |
Headlines
|
|
Interested in advertising with us?
Click here
|
||