Boards and Bits
MPD Announce Ultra Low Profile CR2032 Coin Cell Holders
MPD has invented another new CR2032 low profile coin cell battery holder. While other CR2032 holder solutions often rise 8 to 10 mm above the PCB, our new LP2032SM-JJ-GTR rises under 5 mm with an installed CR2032 battery. This directly saves more than 3 mm in height when compared to typical CR2032 battery holders available on the market.
Kingston Technology Ships HyperX Memory Kits with Black PCB
Kingston Technology Europe continues to celebrate its 10th HyperX anniversary by announcing all-new black printed circuit boards on two of its product lines. Kingston's high-performance HyperX Beast and entry-level enthusiast 'black' lines will incorporate black PCB under the signature heatspreader designs.
PX1500-4 – 1.5 GS/s 4 Channel or 3.0 GS/s 2 Channel, 8 bit, PCIe x8, Xilinx Virtex-5 FPGA, Digitizer Board
The PX1500-4 is a four channel waveform capture board that can acquire up to 1500 MSPS on each channel or up to 3000 MSPS for dual channel operation when ADC data is interleaved. The PX1500-4 can be set up to use either a transformer coupled front end or an amplifier connection.
OpenATE announces the PE16A and the PEMU32 self-contained IC tester modules
OpenATE is proud to announce two self-contained IC tester modules, each containing Digital, Power, and PMU resources. The feature sets and specifications of the new PE16A and PEMU32 modules are competitive with and comparable to system features and capabilities found in current generation ATE systems.
Customisable Switching And PXI Control Card From Geotest-Marvin Test Systems
Responding to users' requests for a switching / control card which can be customised for specific applications, Geotest has introduced the GX6196, a 6U PXI switch and control board that can be used to create custom switching, signal conditioning, or custom control interfaces.
Evaluation Board NQ6D
The cascadable demo board NQ6D for the evaluation of angle sensors and encoders comes with the advanced sine-to-digital converter iC-NQC. Here, the serial BiSS C interface permits clock-synchronized measurement reading from boards docked on to one another, useful for position sensing along several axes, for example.
New Emerson Network Power OpenVPX Board Optimizes Performance, Flexibility and Connectivity for Defense, Aerospace and Industrial Applications
Emerson Network Power today announced a new 3U OpenVPX processor board designed to provide high compute performance, flexibility, and high speed fabric connectivity for a range of industrial, communication and military/aerospace applications.
Hylec-APL Terminal Blocks For Very High Temperature Applications
Hylec-APL has introduced a new comprehensive range of Steatite ceramic terminal blocks which are ideal for wire termination in demanding high temperature applications. Manufactured by Hylec-APL Company, DE Controls, the terminal blocks are a design that is available in both two and three pole options. The new ranges of Steatite ceramic terminal blocks have several characteristics which make it advantageous over existing porcelain ceramic products.
4DSP Announces Virtex-7 boards in the XMC and VPX form factors
4DSP announced the release of the FM780 and VP780, two highly configurable modules with advanced Digital Signal Processing (DSP) capabilities and multiple I/O options. The FM780 is XMC (VITA 42.3) compliant with a PCI Express Gen 2 interconnect while the VP780 is a 3U VPX form factor (VITA 46).
CR2032 Off Board Mounting Battery Holders From MPD
MPD has invented a new category of lithium coin cell battery holders for the "off board" mounting of lithium coin cell batteries. Now designers have the flexibility to locate lithium coin cell batteries anywhere there is physical room. No soldering tools, chemicals, reflow/wave processing, circuit board required. The two power terminals feature an opening to accept wire leads and double as male connectors mating with common quick connect terminals. Industry standard sizes of 3.6 by 0.38 mm allow these terminals to mate quickly and easily.
RST Brings Ex Cable Gland Line up to New Standard for Explosion-proof Goods
The use of products in explosive areas is highly regulated by standards and guidelines. In June of this year the new standard, EN 600079:0 (2009), was implemented and replaced the previous 2006 version. For this reason we have brought some of the most important items in our range up-to-date.
Eaton Offers Three-Phase RCBO for Memshield 3
Distribution boards in the popular Memshield 3 range from Eaton's Electrical Sector are now even more versatile; thanks to the introduction of a new three-phase RCBO for feeding three-phase loads that require earth-leakage protection.
AAEON announces the GENE-QM77 SubCompact board with 3rd Generation Intel Core i-Series Processors; GENE-QM77
AAEON released today two new Intel-based high performance GENE-QM77 3.5" SubCompact SBCs which can greatly enhance performance and provide new features for self-serving ATMs, Kiosks, advanced Gaming and Multimedia applications. These powerful palm-sized boards can also be adapted for networked Automated Medication Dispensing Machines and Smart Interactive Physical Therapy devices in hospitals and clinics.
Pickering Interfaces introduces the 65-110 LXI wideband modular matrix
Pickering Interfaces is expanding its range of LXI switching solutions with the introduction of the 65-110 LXI Wideband Modular Matrix. The 65-110 is a new modular platform providing a solution for connecting up to 16 of 104 X connections simultaneously to16 measuring devices on the Y axis with a usable BW of 500MHz.
congatec presents reference board for powerful video wall system design
congatec AG introduces a new reference board for video wall system design. Video wall systems increasingly rely on high-quality videos and (3D) graphics and therefore require a maximum number of graphics interfaces. The congatec reference board offers up to nine independent DisplayPort connectors in combination with an MXM graphics module and a COM Express CPU module.
Keystone launch UL Recognized Fuse Clips For Cylindrical Fuses
Keystone Electronics have announced the availability of UL recognized Fuse Clips with end stops to insure safety and design integrity. Available for use with Cylindrical Fuses sizes 1AG thru 8AG, Midget and Solar Protection (SPF) style fuses.
Hitex unveil LPC4357 Evaluation Board for NXP's LPC4357
Hitex have today introduced the LPC4357 Evaluation Board for NXP's new Cortex-M4-based dual-core LPC4357 microcontrollers. The LPC4357 is provided with 1MB Flash, 16kB EEPROM and 136kB SRAM on chip. The evaluation board is USB-powered, but can also be driven by external power supply or via power-over-Ethernet.
Stratix V 6U OpenVPX COTS FPGA Board from BittWare
BittWare have today announced that they are now offering the industry's first 6U VPX board, powered by Altera's 28-nm Stratix V FPGAs. Designed for high-end applications, the Stratix V provides a high level of system integration and flexibility for I/O, routing, and processing. The new S5-6U-VPX board, available from Sarsen Technology, provides a configurable 48-port multi-gigabit transceiver interface supporting a variety of protocols, including Serial RapidIO, PCI Express, and 10GigE.
GE Announces High Performance Graphics Board for Optimum Performance in Constrained Environments
GE Intelligent Platforms announce the XMCGA7 High Performance Graphics Board. Designed for sophisticated, demanding graphics applications in harsh environments, the rugged XMCGA7 mezzanine features the latest E6460 graphics processing unit from AMD to deliver the highest possible performance from a restricted power envelope.
PCIe Flash Nytro MegaRAID Acceleration Cards from LSI
LSI has revealed worldwide availability of the PCIe flash LSI Nytro MegaRAID cards, providing simple, transparent and cost-effective application acceleration for direct-attached storage. Nytro MegaRAID cards uniquely integrate PCIe flash technology and intelligent caching software with enterprise RAID data protection using leading LSI dual-core RAID-on-Chip technology.
Brad PC-Based Network Interface Cards from Molex
Molex has announced that it will showcase its comprehensive selection of Brad Network Interface Cards at the Industrial Automation North America show at Chicago's McCormick Place, September 10-15, Booth E-4301. The Brad PC-based NICS offer intelligent and cost-effective communication solutions used to connect various computer bus formats, including PCI Express, PCI, PC/104, USB and VME, directly to industrial networks.
Digitaltest introduce new HYB04 driver/sensor board with 128 pins.
As the new HYB04 driver/sensor board comes with 128 pins, the Digitaltest test systems can therefore be equipped with twice as many hybrid pins. This is also a major extension for the MTS30 system which is limited to 10 slots. The board supports fast and accurate tests for low voltage applications.
VM-aware Dual Port 1G Bypass Server adapter from Interface Masters
Interface Masters has revealed the first member of its virtual machine-aware Bypass Server adapter family that supports dual ports 1 Gigabit Copper Bypass. Niagara 42265-VM supports Virtual Machine control to ensure smooth integration with PCI-express based Inline Networking Servers that leverage VM capabilities, including WAN Acceleration, UTM, SAN/NAS appliances, IPS, Security and Monitoring Appliances such as Firewalls, IDS and Analysis Probes.
New ruggedised PCB retainer features 7-segment design for improved performance
New from electronics packaging specialist Schroff is a ruggedised PCB retainer with an innovative 7-segment design, which results in a more even distribution of the clamping force and improved thermal transfer between the PCB and the chassis cold wall.
Stratix V Boards from Terasic are designed for High-Bandwidth Apllications
In order to fulfil the design needs that demand high speed, advanced memory interfacing, and the highest logic capacity, Terasic has just announced a host of new FPGA boards for tackling high-bandwidth applications such as high frequency trading, data acquisition, network and signal processing.
Type 6 COM Express Module from AAEON is Ideal for Graphic-intensive Applications
AAEON are today pleased to announce a new Type 6 COM Express board: COM-CV Rev.B. Built on the 32nm process technology, these products bring the latest technological advances and performance optimizations at higher CPU clock rates than previously available.
ROBO-8111VG2AR PICMG 1.3 SHB Form Factor from Portwell
Portwell today unveils the Portwell ROBO-8111VG2AR full size PICMG 1.3 System Host Board which provides high performance graphics and flexible PCI Express expansion, ideal for a wide range of applications across several fields to include Factory Automation and Image Processing, as well as use in Kiosk, Medical, and Military equipment.
VP 91x/01x - 6U VME from Concurrent features 3rd generation Intel Core processors & advanced security
Concurrent further increases the lifecycle of the 6U VME architecture with the latest release of their VP 91x/01x processor board utilizing 3rd generation Intel Core processors. The VP 91x/01x brings unprecedented performance and power efficiency to the VME form factor while maintaining compatibility with the previous generation product and offering advanced security packages.
MB970 ATX Motherboard from IBASE
IBASE have released the ideal solution for a diverse range of applications such as Gaming, Kiosk, ATM, POS, Digital Signage and Multimedia. The MB970 ATX motherboard is based on 3rd Generation Intel Core Processors and Intel Q77 Express Chipset.
Heavy duty fuse clip from Schurter
SCHURTER has expanded its range to include a fuse clip designed for heavy duty performance. The CSO clip, designed for 10.3 mm diameter fuses, is suitable for applications with voltages up to 1500 VAC/VDC and currents to 32A. These unique characteristics are SCHURTER's response to the present need for increasing photovoltaic system voltages.
Pentek Board Synchronizes up to 256 Channels for Military, Medical Imaging and Beamforming Applications
Pentek, Inc., today introduced a system synchronization and distribution amplifier, the Model 7893 PCIe board. This synchronizer is designed to support up to 8 Pentek Virtex-6 Cobalt and Pentek Virtex-7 Onyx boards at sample clock rates up to 800 MHz.
New PCI Express DAQ Board from Measurement Computing
Measurement Computing Corporation has announced the release of the PCIe-DAS1602/16 multifunction DAQ board for the PCI Express bus. Available from Adept Scientific the 16-bit PCIe-DAS1602/16 offers 16 analogue inputs, a 100kS/s sample rate, 32 digital I/O, two analogue outputs and three counter inputs.
HuMANDATA Launches Altera Cyclone IV USB-FPGA Board
HuMANDATA LTD. today released EDA-301 of USB-FPGA board powered by Altera Corp.'s Cyclone IV E FPGA (EP4CE15F17C8N). HuMANDATA's EDA-301 is equipped with Altera high-spec Cyclone IV E FPGA on acompact, 53 x 54mm PCB. A configuration device, on-board oscillators, user switches and LEDs are mounted as minimum components of FPGA design and development.
New Industrial Mini-ITX Motherboard passes screen test
NEXCOM NEX 607 is a Mini-ITX industrial motherboard which is the ideal platform on which to base your Digital Signage Solution. NEX 607 supports the Intel Core i7/ i5/ i3 and Intel Celeron mobile processors with FCPGA 988 socket. Paired with QM67 PCH chipset and integrated Intel HD Graphics 3000 engine, this board has powerful graphics performance and is supremely reliable.
TI establishes new benchmark for evaluating high-speed data converters with industry’s highest-performance, lowest-cost evaluation boards
Texas Instruments Incorporated today introduced the industry's highest-performance and lowest-cost evaluation boards for evaluating high-speed data converters. The TSW1400EVM data capture and pattern generation board evaluates up to 16-bit analog-to-digital converters (ADCs) and digital-to-analog converters (DACs).
Ultra Low Power Nano-ITX Motherboard with Great Graphics Performance - NANO101
Axiomtek today released NANO101, a new compact, low-power Nano-ITX board powered by either a single core AMD G-Series APU T40R at 1.0GHz or the dual core T40E at 1.0 GHz paired with the A50M FCH chipset and one up to 4 GB DDR3 1066 memory. Integrated with Radeon™ HD 6250 graphics controller with mainstream DirectX 11 support, the NANO101 provides outstanding visual experience and features 18/24-bit single/dual channel LVDS and VGA with dual view compatibility.
XMC4000 Evaluation Board with WLAN
Hitex Development Tools offers a compact „all-in-one" evaluation board right in time with the newly introduced XMC4000 architecture from Infineon based on the Cortex-M4 core from ARM. The board named XMC-HiLight comes with a bunch of functions such as communication (WLAN, LAN, USB), slide control, LED matrix control, RGB, A/D on just one board.
e-con Systems Announces Video Decoder Board to support NTSC/PAL camera for Freescale i.MX53 QSB
e-con Systems Inc. announces its video decoder board e-CAMNT_MX53x to support analog camera interface for Freescale i.MX53 Quick start board(QSB). e-con Systems' e-CAMNT_MX53x video decoder board can be used as a plug-n-play to interface NTSC/PAL camera. Along with the adapter daughter card, e-con systems also provide drivers for Linux. The NTSC/PAL video decoder board has interfaces for both S-Video input and Composite video input (CVBS).
LED Engin's new connector boards enable faster, easier assembly of solid state lighting fixtures
LED Engin, Inc. announces a family of metal-core printed circuit boards (MCPCBs) with integral connectors that eliminate soldering during the assembly of LED fixtures. The poke-home connectors, which accept 18-24 AWG wires, offer quick, solderless assembly of fixtures and can eliminate the need for OEMs to use sub-contractors because the work can be taken in-house.
Conduant Announces the SNAP12 Optical FPGA Card for PCI Express Applications
Conduant Corporation today introduced its SNAP12 Optical FPGA input/output board for a wide variety of high-speed optical applications. The Conduant SNAP12 Optical FPGA board features a Xilinx Virtex 6 field programmable gate array (FPGA) for connecting ports and devices. Through an 8-lane Gen2 PCI Express interface and SNAP12 optics, the board can achieve performance rates up to 5 Gigabytes (GB) per second for 12 lanes in and 12 out simultaneously.
Page 1 2