Batteries
YEG Powerline offers a new range of HZY series Gel lead acid batteries for solar applications
YEG Powerline HZY series Gel batteries are ideal for use with photovoltaic solar cells. Typical applications for HZY Solar Gel batteries are: Cell powered Road traffic signs, cell powered Hybrid power supplies and cell powered Water pumps.
1U Battery Tray Rack
DMS technologies, one of the country's leading specialist battery systems manufacturer, has just launched a generic 1U 19" battery tray rack. The 1U 19" battery tray rack will fit most standard 19" racks and can house a wide range of batteries providing capacities up to 7Ah at 48V. The system can be used with a range of battery chemistries including lead acid, NiMH and Lithium, to provide the widest range of available capacities.
A123 Systems Opens Lithium Ion Automotive Battery Manufacturing Plant in North America
A123 Systems (Nasdaq:AONE), a developer and manufacturer of advanced Nanophosphate™ lithium ion batteries and systems, today announced the grand opening of the largest lithium ion automotive battery production facility in North America, based on available data. The new plant in Livonia, Mich. is expected to expand A123's manufacturing capabilities by up to 600MW hours per year when fully operational, contributing to the company's plan to expand global final cell assembly capacity to more than 760MW hours annually by the end of 2011. The opening of the Livonia factory comes just over one year after A123 was awarded a $249 million grant from the U.S. Department of Energy (DOE) as part of the American Recovery and Reinvestment Act to help the company execute its strategy to ramp up U.S. manufacturing capabilities to meet increasing, market-driven demand for its innovative technologies.
Saft introduces Li-ion battery technology for marine propulsion and auxiliary systems
Saft, the world specialist in the design and manufacture of hightech industrial batteries, is at SMM 2010 to introduce its advanced Li-ion (lithium-ion) battery technology that offers interesting new possibilities for the creation of highly efficient and costeffective marine propulsion and auxiliary systems. Visitors to Stand 16 in Hall B4 are invited to meet Saft's expert team to discuss the potential performance, weight-saving and TCO (Total Cost of Ownership) advantages of Li-ion batteries in a wide variety of demanding marine applications. Saft has a wealth of experience in the marine industry as a supplier of battery systems for emergency back-up, lighting, engine starting and other auxiliary systems. The use of Li-ion batteries for ship and boat propulsion applications is therefore a natural progression for Saft, based particularly on its broad expertise in delivering advanced battery systems for the railway and automotive industries as well as underwater applications.
Saft wins order from AAI Corporation for lithium batteries to power Universal Ground Control Station
Saft received an order for lithium-ion (Li-ion) batteries from AAI Corporation to supply back-up power for its Universal Ground Control Station (UGCS), which controls Unmanned Aircraft Systems (UAS). The 28V batteries are capable of integrated charging, an innovative feature that strengthens and simplifies the powering system.
Latest Ariane 5 ECA launch marks 50th satellite to use Saft Li-ion technology
Saft, the world leader in the design and manufacture of hightechnology industrial batteries, has supplied its advanced lithium-ion (Li-ion) battery modules to power the latest satellites to be successfully launched into space – Arabsat 5A, which will provide a broad range of satellite communication services to the Middle East and Africa, and COMS (Communications, Oceanography and Meteorology Satellite), a South Korean multimission satellite.
Saft signs a new multi-year LTA with EADS Astrium to power all GEO satellites
Saft has signed a new multi-year LTA (Long Term Agreement) with Astrium to supply the onboard lithium-ion (Li-ion) battery modules for every Eurostar GEO (Geosynchronous Earth Orbit) communications satellite to be built over the next years. This latest LTA renews and extends the previous agreement between Saft and Astrium that commenced in 2006. The new LTA covers the supply of the onboard battery modules, built with Saft's high-energy VES140 and VES 180 cells, for the latest version of the Eurostar GEO platform, the E3000.
150W Rugged, Industrial Quality, Universal Input Battery Charger with PFC-input.
Absopulse Electronics' BCP 150 Series is a rugged, industrial quality battery charger. It provides 150W total power for the output and for float charging the external battery. Standard single output float voltage options include 13.8Vdc, 27.6Vdc or 55.2Vdc. The unit accepts a 95-264Vac universal input (47-63Hz) with power factor correction to meet EN61000-3-2. Custom input and output options are available on request.
Saft lithium-ion battery system will power Argentina’s ARSAT-1 GEO communications satellite
Saft has been selected by AR-SAT SA to supply the lithiumion (Li-ion) battery system that will power ARSAT-1, the first communications satellite to be designed and integrated in Argentina. Arsat-1,the first in a series of satellites, is scheduled to be launched in 2012 and will provide coverage for Latin America.
Saft showcases advanced battery technology for telecoms
Saft is showcasing its total capability to meet the evolving needs of a wide range of telecom applications at INTELEC 2010 – the International Telecoms Energy Conference – where dependability, low maintenance and low total cost of ownership (TCO) are paramount. In addition to displaying its battery technologies, Saft is also presenting a paper that reports on practical experience with nickel based batteries installed for up to 10 years in outside plant applications.
Saft batteries provide high-tech traction battery for Sitras HES hybrid energy storage system on Siemens Mobility’s trams
Saft has supplied Ni-MH (nickel-metal hydride) integrated traction battery systems to Siemens Mobility for use in the development of a new generation of trams equipped with the Sitras HES hybrid energy storage system. The first tram with Sitras HES, equipped a Saft battery system onboard, has completed more than one year of successful passenger service trials in Portugal with the Siemens Mobility customer MTS (Metro Transportes do Sul, S.A.), Since the end of 2008, it has been operating services between Almada and Seixal, two cities to the south of Lisbon.
Saft Li-ion batteries move into telecom market in outdoor BTS cabinets for Latin American Tetrapol network
Saft is now supplying its Intensium 3 high performance, maintenance free lithiumion (Li-ion) batteries for a telecom BTS (Base Transceiver Station) power backup application. b+w Electronic Systems, the German system integrator, has used Saft's high energy Intensium 3 rackmount Li-ion battery system to create a new generation, passively-cooled, outdoor cabinet that delivers increased reliability and substantial power savings in even the most demanding operational conditions. EADS Defence & Security is currently deploying the b+w outdoor cabinets in a project to expand the Tetrapol digital radio communication network used by security forces in Latin America.
Saft Li-ion battery technology provides the energy storage at the heart of ABB’s new SVC Light concept for the Smart Grid
Saft Li-ion (lithium-ion) battery technology is providing the energy storage at the heart of ABB's new SVC Light concept that will be a key element in the creation of the Smart Grid essential to handle significantly increased levels of renewable generation. The SVC Light with Energy Storage adds a significant new dimension to ABB's Smart Grid philosophy by combining energy storage capability with its well-established SVC Light technology. This approach will alleviate many of the concerns related to the addition of wind power and solar energy generation to existing grids by helping to level out intermittent production and support demand response.
12V AA battery holder with sliding covers & switch
Memory Protection Devices introduces part number BK-6049 for holding 8 AA batteries. Offering 12 volts output with 8 AA alkaline batteries in series or 9.6 volts with rechargeable batteries. A built in sliding switch in the case is recessed below the surface to prevent accidental activations and is rated for 0.5A. Dual sliding covers have snap locking tabs and allow for quick battery changes without the use of tools.
CR1632 coin cell battery holders
MPD is introducing P/N's BV-1632 & BV-1632-G, two lithium vertical battery holders for CR1632, BR1632 or DL1632 size batteries. The BV-1632 and BV-1632-G are particularly suitable for single board computers with tight space constraints. Designed to be as compact as possible but to withstand harsh environments where SBC's are sometimes found.
AA battery clip with SMD leads, P/N: BK-53
MPD is introducing P/N BK-53, a surface mounting AA battery clip. Using two spring arms to capture and hold a AA battery in place. These arms make it very easy to insert and remove a AA battery because of the excellent access afforded. Normally used in pairs the clips are a very low cost yet effective method of adding a battery to a pcb.
Enclosed AA battery holder with wall-pcb-chassis mounting option
Memory Protection Devices introduces part number BK-6089 for holding 6 AA batteries. Offering 9 volts output with 6 AA alkaline batteries in series and 7.2 volts with rechargeable batteries. The sliding cover has one large snap locking tab on the front and two small tabs at the rear. Allowing for quick battery changes without the use of tools and is dependable to keep the cover in place. Reverse battery protection is built in and clear markings for battery direction are provided.
Bergstrom Inc. and Johnson Controls-Saft develop lithium-ion battery for NITE® no-idle systems
Bergstrom Inc. and Johnson Controls-Saft today announced the development of a lithium-ion (Li-Ion) battery for NITE no-idle systems that will improve power efficiency, result in longer run times and enhance the environmental benefits of its no-idle units. There are several key benefits of the Li-Ion battery. At only 110 lbs, the Li-ion battery weighs 63 percent less than the traditional battery option. In addition, the Li-ion battery provides 16 percent more power, has 20 percent less volume, and boasts an estimated lifespan of six to eight years.
Saft wins multi-million order from Boeing for satellite Li-ion batteries
Saft has received a multi-million order from The Boeing Company [NYSE: BA] to deliver high-performance lithium-ion (Li-ion) batteries for the first order for Boeing's 702B series satellite, a medium-level power satellite with six to 12kW of on-board power. The order is the first under Saft's five-year long-term agreement with Boeing, announced last year.
12V AA battery holder with sliding covers & switch
Memory Protection Devices introduces part number BK-6049 for holding 8 AA batteries. Offering 12 volts output with 8 AA alkaline batteries in series or 9.6 volts with rechargeable batteries. A built in sliding switch in the case is recessed below the surface to prevent accidental activations and is rated for 0.5A. Dual sliding covers have snap locking tabs and allow for quick battery changes without the use of tools.
Yuasa High Capacity Industrial Battery Delivers 40% Improvement In Discharge Capacity
Yuasa Battery has announced a new addition to its SWL family of industrial valve regulated lead-acid (VRLA) batteries with the launch of the SWL3300FR model. The new SWL3300FR follows the same increased performance profile as the other batteries in the SWL range. This typically gives 40% extra discharge capacity over and above a standard NPL type.
AA battery holders with retainer strap
Memory Protection Devices introduces part number BK-6100-PC4 for holding two AA batteries. With 4 large stainless steel contacts firmly applying pressure to the AA batteries you're assured of a long lasting trouble free connection. Four printed circuit contacts allow quick mounting and serial or parallel connection flexibility of circuit design without the need for fasteners or glues.
Saft Nife showcases advanced battery technology for reliable standby and photovoltaic energy applications
Saft Nife ME Ltd, the Middle East representative of the world leader in the design and manufacture of high-technology industrial batteries, is showcasing its advanced battery technology for a wide range of standby and photovoltaic energy applications where dependability, low maintenance and low total cost of ownership (TCO) are paramount. Visitors to Stand 2A20 in Hall 2 will be able to see several of Saft Nife's advanced battery ranges.
Darim selects Saft Li-ion batteries to power its PVE – a portable video encoder/streamer for emergency response teams
Saft recently delivered an order of MP 176065 rechargeable lithium-ion (Li-ion) batteries to Darim Vision for the PVE400 portable video encoder/streamer. The batteries will power a camera and encoder for up to five hours of continuous field operation as it wirelessly transmits real-time video footage from individual points of view in the field. PVE400 cameras are typically used by critical and emergency response teams such as fire companies and emergency management agencies as well as the military; therefore they demand high performance, light-weight rechargeable batteries that perform well in harsh environments. The batteries can be easily changed in the field to maintain complete portability of the camera, even with such a high ruggedness rating.
ANSMANN launches maxE/maxE+ range of long-lasting rechargeable NiMH batteries for industrial portable equipment applications
ANSMANN, the specialist manufacturer of batteries, battery chargers and power supplies for industrial, consumer and hobby applications, has launched the maxE/maxE+ range of long-lasting rechargeable NiMH batteries that are ideal for use in industrial portable equipment applications.
Saft MicroSat Li-ion battery modules to power Turkey’s LEO satellite
Saft has been awarded its first satellite battery contract by Turkey's TÜBİTAK UZAY (Space Technologies Research Institute). Its space-proven MicroSat standard lithium-ion (Li-ion) battery modules will provide onboard backup power for TÜBİTAK UZAY's LEO (Low Earth Orbit) reconnaissance and surveillance micro-satellite system. "This is an important contract for a new customer in a new country for us" said Philippe Jehanno, General Manager, Space and Defence Division, Saft.
Saft lithium-ion batteries power the cars in the Andros Electric Trophy ice race
Saft is supplying the lithium-ion (Li-ion) batteries for all eight cars in the inaugural 2009-2010 Andros Electric Trophy ice speed race. Saft's lithium-ion batteries showed their effectiveness in terms of robustness and performance from the start of the racing series, giving drivers in the Andros Electric Trophy the same sensations that are normally reserved for classic motor sport.
Custom 7.4V, 1900mAh Li-Ion Prismatic Battery Pack for Portable Therapeutic Equipment
GlobTek is introducing the latest member of it's custom battery pack product offering. Introducing a Li-Ion Prismatic battery pack rated 7.4V, 1900 mAh consisting of 2 Panasonic CGA103450A 103450 sized cells packaged in a custom enclosure with protection and fuel gauge circuitry included.
New lithium battery Gliders for 10 mm to 24 mm cells.
MPD is introducing a whole new category of battery holders for lithium coin cell batteries. "Gliders" are a hybrid type combining the low cost of retainers with higher reliability than regular coin cell battery holders. They are particularly suitable for hand-held consumer and medical products, electronic cards, electronic toll tags, single-use devices, alarm systems, main boards, PND's and RFID.
A123 Systems and IHI Corporation Sign Joint Marketing Agreement to Develop Advanced Battery Technology Business in Japan
A123 Systems and IHI Corporation announced today that they have entered into a collaborative business development agreement to serve potential customers in the Japanese transportation, industrial and marine markets. Under the terms of a joint marketing agreement, the two companies will pursue new customer opportunities in energy storage in the Japanese market.
UK Legislation Update: Avoiding the Battery Directive headache
Batteries are one area of electronics that have defied the downturn and sales are continuing to show healthy growth on the back of a growing desire to use professional and consumer electronics products on the move. The downside of this growth is the number of batteries finding their way into landfill, some of which include hazardous chemicals in their make-up.
A123Systems Awarded $249M Grant from U.S. Department of Energy to Build Advanced Battery Production Facilities in the United States
A123Systems announced today that it was awarded a $249 million grant from the U.S. Department of Energy's Electric Drive Vehicle Battery and Component Manufacturing Initiative. Under the terms of the $249 million grant, A123 will be required to match the funds over time as they are used. This grant is an important part of A123's U.S. manufacturing strategy, which also includes an application for a loan from the Department of Energy's Advanced Technology Vehicles Manufacturing program. The grant will be used to help implement A123's strategy for the construction of world-class lithium ion battery manufacturing facilities in the United States, with the first construction location in Livonia, Michigan.
Saft obtains initial successes on investment in new generation Tel.X telecom network batteries
Saft has announced at INTELEC 2009 – the International Telecoms Energy Conference – that it is seeing an early return on its major investment in the development and production of a new generation of batteries aimed specifically at the most demanding telecom network backup power applications. Less than a year after Saft opened a dedicated $9 million production line at its US manufacturing facility in Valdosta, Georgia (United States), the new Tel.X battery has been adopted by a number of leading telecom operators in North America, the Middle East and Europe.
New lithium battery holder for CR2032 cells
MPD introduces its new part number BC2032-E2, a battery holder for CR2032 cells. This holder also accepts one BR2032 battery and is suitable for consumer or industrial products. BC2032-E2 has large nickel plated stainless steel pressure contacts with pc pins tails that are unequal in size so the holder is polarity protected to the PCB against insertion errors.
Saft MATRICS MRX onboard battery systems offer 30 percent increase in capacity for upgraded Port Authority Light
Saft has supplied onboard battery systems based on its specialized MATRICS MRX railway batteries for 55 light rail vehicles currently being upgraded for the Port Authority of Allegheny County light rail system in Pennsylvania, US. The Port Authority, owner and operator of the light rail system (commonly known as the 'T'), is the first US transit authority to specify Saft MRX rechargeable nickel-cadmium (Ni-Cd) batteries for a battery replacement programme. The reasons for the switch are to achieve a major increase in battery capacity, without needing to modify the existing battery box, as well as higher performance, longer life and reduced maintenance.
New web-store for batteries from DMS technologies is launched October 1
DMS technologies is ISO9001 accredited and has been producing batteries for industrial users, including the defence, telecomms and marine sectors for over 20 years. In a new development for the business, the company has just launched an on-line store - www.dmsshop.co.uk - to handle smaller, less regular orders of batteries and chargers, a more convenient route to purchase.
Saft batteries keep solar-powered travel information displays running year-round for Germany’s railways
Saft is supplying its specialized Sunica.plus nickel-cadmium (Ni-Cd) batteries for self-contained solar-powered information displays being installed at railway stations across Germany by AEG Gesellschaft für moderne Informationssysteme mbH (AEG MIS).
IBC Series Intelligent Lead Acid Battery Chargers from YEG Powerline
The YEG Powerline IBC Series Intelligent Battery Chargers offer an ideal way of charging any type of lead acid battery safely and reliably. The rugged, fully protected unit (IP65) can be used in a variety of applications including on trucks, off road vehicles, boats, caravans, depots, workshops and many industrial applications.
12V Batteries have 18, 21, 26 or 36Ah capacities
Yuasa's TEV range all have 12V output with four different capacities, 18, 21, 26 and 36Ah (TEV12180, TEV12210, TEV12260, TEV12360). The batteries are also ideal for other cyclic applications such as toy cars, golf trolleys, photovoltaics, lighting, sprayers, robots, electric tools, communications equipment, pumps, measuring instruments and magnetic lifts.
YEG Powerline Yuasa REC10-12 battery designed to meet EN 50131 for intruder alarm systems
The Yuasa REC10-12, a 12V maintenance-free battery is specifically designed to help engineers meet all installation and system specifications as defined by EN 50131 for the security industry. The battery offers an extended design life of 7 years and an increased capacity of 10Ah (20h rate).
