AC / DC
Astrodyne - 130W Switching AC/DC Power Supplies for Industrial, Lighting and Medical-Grade Applications
Astrodyne has introduced the PMK/PMMK130, the most recent series of flexible switching AC/DC power supplies to join the PMK/PMMK family. The PMK/PMMK family currently consists of 150, 225, 320, 450 W and now has added 130 W for lower wattage applications. This new series provides standard single and triple output voltages of 5, 12, 15, 24, 28, 36 and 48V, enhancing their utility across a wide range of applications. Astrodyne offers the designer the ultimate in power density and performance features for both new and existing designs in instruments, process control and monitoring systems, communications products, and embedded controls.
Emerson Network Power - High-Efficiency, Triple-Output LPT100-M AC-DC Power Supplies
Emerson Network Power has launched its latest high-efficiency AC-DC power solution, the LPT100-M series. The power supplies features both information technology equipment (ITE) and non-patient contact/critical medical safety approvals, making them ideal for use in ITE and light industrial systems, as well as equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.
Ultra compact 100W AC/DC power supply meets industrial and medical safety standards
XP Power has announced the availability of the ECS100 family of single output 100 Watt AC/DC power supplies. Fitting into a standard 1U space, this compact unit, measuring only 50.8 x 101.6 x 30.5 mm (2 x 4 x 1.20 inches), offers a high power density of 10.4 Watts per cubic inch. The units can provide 80 Watts when convection cooled, and require only 10 CFM of forced airflow to provide the full 100W output.
Hot swappable 1U 1500W AC/DC power supply suits bulk power and DPA applications
XP Power has announced the GFR1K5 1500 Watt AC/DC power supply series aimed at a broad range of industrial and communications applications that require bulk power within a compact 1U enclosure. Available in four single output models covering the nominal output voltages of +12, +24, + 48 or +56 VDC, the units can be mounted within a standard 1U height equipment rack. An optional rack mount enclosure is also available that allows up to 4 GFR1K5 units to be mounted side by side providing up to 6kW output. All units can be hot swapped and used in redundant configurations.
Astrodyne Adds Flexible 450W Switching AC-DC Power Supplies for Industrial and Medical Applications
Astrodyne announces the latest addition to the flexible PMK/PMMK family of high-density, switching AC-DC power supplies, capable of delivering 450 watts with active PFC. Designed for moderate power needs, the PMK/PMMK AC-DC power supplies are designed to meet stringent space requirements while delivering optimal performance characteristics needed for I.T.E systems, pumps, motors and instrumentation applications. The PMMK versions are fully qualified for medically approved AC-DC power supply applications.
400 Watt Power Module with Active PFC and Isolated DC Output
Martek Power, Inc. announces the release of the MW400S 400 Watt single output AC-DC power module . The highly reliable, off-theshelf module is ideal for military, industrial and aerospace applications.
Murata Power Solutions provides front-end power for zero emission race team
Murata Power Solutions' D1U-W AC/DC front-end power supply has been chosen by the Imperial Racing Green Team for use in the Hydrogen fuel cell systems for its next-generation Zero emission vehicles. The team is a project of London's Imperial College that draws on expertise from across the engineering faculty to develop and build vehicles to compete in races across the globe. Murata Power Solutions has supplied three of its 48V, 2000W power supplies. The Imperial Racing Green Team is currently competing in the Worlds' first Hydrogen fuel cell race series called Formula Zero. Other competitions include Formula Student and The Zero Race.
XP - Ultra compact AC/DC power supply family adds screw terminal options
XP Power has announced line-up additions to its ECL family of ultra compact low power AC/DC power supplies. The ECL-S series, comprising 15 and 25W models, provides a chassis mount screw terminal format option in addition to the chassis mount JST connector, PCB mount and encapsulated versions already available across the whole ECL range. Believed to the smallest units available in the market, the 15 W ECL15-S model measures just 84 x 34.50 x 26.4 mm (3.31 x 1.35 x 1.04 inches). The new series is ideal for low power applications that require the use of a chassis mounted screw terminal supply or where parts need to be sealed from the operating environment.
XP claims first 250W AC/DC power supply to hit 95% efficiency
XP Power has announced a 250W AC/DC power supply, the CCM250, that achieves up to 95% efficiency, cutting the heat generated in medical, IT and industrial systems. Rival products typically operate at 90% maximum efficiency, with 10% of the input energy being converted to waste heat that needs to be removed. The 5% improvement in efficiency offered by the CCM250 means that it dissipates only half the heat, reducing or eliminating the requirement for heatsinks, or fans for forced-air cooling.
Chassis Mountable AC/DC Modules from PowerPax
PowerPax has announced a new range of chassis mounting AC/DC Modules. Designed to provide an easy solution for applications where the power supply needs to be chassis mounted and rugged the SFS and FS ranges provide single, dual and triple output models in output powers of 5 – 30W. This series offers power supplies with a universal AC input which can also accept DC power in the range of 110 – 340V DC. All of the products in the range have a built in EMI filter, inrush current limiting and have low no load input current.
High Density open frame AC/DC power supply now available from Ecopac Power
Ecopac Power has announced the release of the ECO-160 series open frame Ultra High Density power supply with 20W/in³ power density in a 2x4x1 footprint. The ECO-160 is a compact and low profile 160W AC/DC power supply ideal for applications and designs where space is at a premium. With 90% efficiency and a no load power consumption of less than 2.3W, it provides one of the highest efficiencies and power densities available from an open frame power supply of this size.
400W Baseplate Cooled AC/DC Power Supply keeps its cool
Responding to the growing demand for high power, conduction-cooled power supplies, Powersolve has introduced the PSL400BP Series of baseplate cooled AC/DC units. The new power supplies are designed to offer single outputs of 5V, 12V, 24V or 48V DC with output power up to 400W.
XP Power targets high volume, cost-sensitive markets
XP Power has announced the VCT60 series of 60W, single output AC/DC power supplies, the first of its new V-Brand range of low cost power supplies. Fitting into a standard 1U space, measuring 50.8 x 101 x 24.1 mm (2 x 4 x 0.95in) the units are ideal for designers requiring an economical power supply that can fit into an industry standard 2 x 4in footprint.
20W board mounted AC/DC power supply offers low profile
XP Power has announced the ECP20 series of compact, low profile 20 Watt AC/DC power supplies that are suitable for low power PCB-mounted applications. Measuring just 67 x 40 x 18.6 mm (2.64 x 1.57 x 0.73 inches), delivering a power density of 6.6 Watts per cubic inch, and a class leading efficiency of up to 87%, the units are ideal for designs where space is at a premium.
Compact 350 Watt AC/DC power supply from XP
XP Power has announced additions to its MFA350 AC/DC power supply product line-up that are aimed at industrial applications. The new 350 Watt compact models, which can be specified with either screw terminals or molex, are fully enclosed and offer two internally mounted fan cooled variants. The top mounted fan model (-TF) measures just 172.2 x 84.5 x 50.8 mm (6.8 x 3.33 x 2.0 inches) and has a power density of up to 8 W per cubic inch.
TDK-Lambda’s AC Input Full-Bricks
TDK-Lambda has introduced the PFE-S series with enhanced circuitry to improve lightning surge capability (up to 6kV) and line interrupt hold-up time. Like the existing range, the PFE-S series combines the AC to HVDC front-end with DC-DC converter into a single standard format, full-brick solution. In addition, the high efficiency of the units, which exceeds 83% in all versions, greatly simplifies the thermal design of the equipment in which they are used.
High Efficiency 250W AC-DC Power Supply from Powersolve
Powersolve has announced a series of high efficiency 250W AC-DC power supplies that feature both commercial and medical safety approvals. The LPS200-M series from Emerson Network Power are compact open-frame designs measuring just 7.6 x 12.7 cm (3 x 5in) with a height of just 3.9 cm (1.5 in). They have a typical full load efficiency of 88% and a power density in excess of 0.66W/in³.
AC/DC Front End power supplies from Murata Power Solutions
The new C1U-W-1200-12-Tx and C1U-W-12-48-Tx AC/DC front end power supplies from Murata Power Solutions are designed to provide 1200W (110/220VAC) of high efficiency, high density power. Packaged in a 1U industry standard low-profile height for chassis mounting, they are suitable for use in a wide range of distributed power and redundant (N+1) applications for the delivery of bulk power to servers, workstations and storage systems in sectors such as industrial, automation, test and measurement and control.
Linear AC-DC & AC-AC Power Supplies/Transformers meet Energy Independence and Security Act of 2007 (EISA)
GlobTek is proud to introduce our linear power supplies/transformers. These low cost Wall Plug-In designs can provide DC or AC outputs up to 20W/VA. Standard features: Output may vary from 50mA to max. Load specified, in 50 mA increments; output voltage +/- 5% tolerance; dielectric strength: up to 4000VAC; Spacing 8mm pri-sec; Leakage:<0.100mA; thermal and OL/SC protection. Input Voltage of 120 or 220/230/240 VAC 50 or 60 Hz, Output Voltage ranging from 3-48Vdc enclosed in a UL94V-0 case.
1000W AC-DC Power Bricks
TDK-Lambda has added more functionality to its PFE range of AC-DC MEGA-brick power supplies with the introduction of the 1000W PFE-F Series. Like the existing lower power PFE modules, TDK-Lambda's PFE1000F combines the AC to HVDC front-end with DC-DC converter into a single module. In addition the baseplate cooled design greatly simplifies the thermal design of the equipment in which they are used. PFE modules satisfy the increasing requirement for fanless high power, especially for outdoor electronics when suitably enclosed.
Low power external AC/DC power supplies meet CEC and EISA energy efficiency standards
XP Power today announced the availability of the AEB series of energy efficient external AC/DC power supplies aimed at desktop and portable applications. The series, comprising 36, 45 and 70 Watt models, meet current US and European energy efficiency standards including those of CEC 2008*1, EISA*2 and the European Code of Conduct concerning energy using products. The units are highly efficient, typically more than 85%, resulting in less wasted energy.
Desktop Power Adapter Supplies High Power of 180W and Various Output Voltages
Tumbler Technologies + TRUMPower launches the TRA180 series of fanless desktop AC/DC switching power adapters, which is a high performance but low cost series. The series provides standard single output voltages of 12V, 15V, 19V, 24V, 36V, or 48V, with output power ramping from 150W to 180W. Nonstandard output voltages can be accommodated via request.
AC/DC switchers from Nu Horizons
Available from Nu Horizons Electronics, the Astec iMP series of switching power supplies features sophisticated digital management capabilities, giving designers the ability to tailor solutions precisely to their individual needs. The series includes single, dual, and triple output modules in power ratings from 600W to 1500W.
1U switching power supplies from Murata
The CF series from Murata Power Solutions is a new range of high density AC/DC switching power supplies. The single main output 200W and 350W open frame units offer industry standard form factor and high density. They are ideal for use in distributed power architecture applications, redundant (N+1) operations, information technology equipment and industrial applications.
60W AC/DC PSU from XP
XP Power has announced the launch of its MCM series of rugged, metal-cased convection cooled power supplies that are ideal for deployment in harsh and physically demanding environments. In addition, the series offers EMI performance to MIL-STD 461E/F standards, conducted and radiated, for emissions and susceptibility. Sealed against dust and water, the unit's metal case is equipped with fixing holes for mounting on an equipment shelf or fitting inside customer equipment. The casing also helps remove heat, allowing the unit to operate at higher temperatures.
Emerson Network Power's 250W ac-dc power supply
Emerson Network Power has launched a series of high efficiency 250 watt ac-dc power supplies that feature both ITE and non-patient contact and non-patient critical medical safety approvals. The new LPS200-M series power supplies are compact open-frame designs; measuring just 7.6 x 12.7 cm (3 x 5 inches), with a height of only 3.9 cm (1.5 inches), they have a typical full load efficiency of 88 percent and a power density in excess of 0.66 watts per cubic centimetre. The supplies are primarily intended for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.
DIN Rail Power Supplies from PowerPax
Powerpax UK has announced a new series of DIN Rail power supplies. The PD Series is geared towards industrial, control and automation applications and feature power outputs of 24W, 45W, 72W, 120W, 240W and 500W, standard outputs include 5V, 12V, 15V, 24V and 48V but for customers with specialist applications it is possible to modify the output to any voltage between 3V and 400V DC.
AC/DC power supply from Murata Power Solutions
Murata Power Solutions has introduced its CEF400-112C series, a new 400W, single output AC/DC switching power supply for distributed power architecture (DPA) applications requiring reliable 12V bulk power. This active power-factor-corrected (PFC) power supply features an integral fan enabling it to deliver 400W of continuous power in a low-profile 1U package without the need for additional external airflow.
Programmable power supplies from Lambda
Lambda has added a new 1U 2.4kW version to its Genesys range of rack-mountable, programmable power supplies that cover 1U, 2U and 3U formats. Offering the highest power density available in a 1U unit, the Genesys family continues to set the standard for flexible, reliable, AC/DC power systems for OEM, industrial, ATE, test and laboratory applications.
Ultra compact 25W AC/DC power supply from XP Power
XP Power has announced the availability of its ECL25 series of single output, ultra compact, low power AC/DC power supplies. Extending the current ECL product line-up of 10 W and 15 W units, the new 25 W output family is available in chassis, PCB or encapsulated PCB mount formats. Starting at only 76.2 x 35.6 x 26.7 mm (3.0 x 1.4 x 1.1 inches) for the pcb mount version, the units suit low power, low cost applications where board or chassis space is limited. With a power density of 5.7 W per cubic inch, the supplies are believed to offer the highest power density and be the smallest of any similar 25 – 30 W products on the market.
100W AC/DC Power Supply in 2 x 4in format from Powersolve
Powersolve has announced a new generation of ultra-compact AC/DC power supplies which feature the highest power density in the popular 2 x 4inch footprint.
Single Output Power Supplies from Lambda
Lambda's new LS Series of convection cooled single output power supplies is available in 50, 75, 100 and 150W models. These general purpose units from Lambda are well-suited to budget conscious applications, but feature an extremely efficient design that achieves excellent thermal properties and offers high reliability.
100-150W AC/DC power supply from Emerson Network Power
Emerson Network Power has launched a high efficiency 100-150 watt AC/DC supply that features both ITE and non-patient contact and non-patient critical medical safety approvals. The new LPS103-M power supply is a compact open-frame design; measuring just 5.1 x 10.2 cm (2 x 4 inch), with a height of only 3.3 cm, it has a typical full load efficiency of 88 percent and a power density of 0.9 watts per cubic centimetre. The supply is primarily intended for use in information technology equipment (ITE) and light industrial systems, as well as for equipment intended for non-patient contact and non-patient critical use in low power medical, dental and laboratory applications.
Compact 200w AC/DC Power Supply from Power Sources Unlimited
Power Sources Unlimited announces the CFM200S Series of 200W super compact (4 x 6 x 1.5) AC/DC power supplies which fit easily into 1U high OEM designs or any application where space is critical. The CFM200S Series features a power factor corrected, universal 90-264VAC input. Ten models provide single outputs from 3.3VDC to 48VDC. Units may be ordered in a U-channel configuration or with an optional cover/fan assembly.
300W Medical Grade Power Supplies from Protek Power North America
Protek Power North America has announced the PM300 Series of 300W, medical, AC/DC switching power supplies, which offer a compact, performance packed design with full compliance to worldwide EN60101-1 medical safety standards.
Multi Range DC Bench Power Supplies from Kikusui
Kikusui's PWR Series are automatic crossover DC constant voltage (CV)/constant current (CC) Bench Power Supplies that enable users to combine a wide range of voltages and currents within the output power rating.
Emerson Network Power launches digitally programmable front-end power supplies
Emerson Network Power has launched a new series of programmable AC-DC front-end power supplies that provide a world-class power density of 1.3 watts per cubic centimetre. The new UFE series power supplies have an exceptionally compact 140 x 273 mm footprint and a height of just 41 mm, enabling up to three supplies to be contained on a single 1U high 19 inch (483 mm) rack-mounting chassis. The highest power model in the series – the UFE2000 – has a 2 kW output rating, so OEMs and system integrators can now configure individual power shelves with up to 6 kW of available power, or up to 4 kW of redundant power. Furthermore, the power supplies can be stacked up to 6U high, to provide up to 36 kW of available power.
10W Slim AC-DC DIN Rail Power Supply
MEAN WELL has launched a slim type DIN rail switching power supply, MDR-10 series, for the fast growing demand of low wattage DIN rail applications. These 10W Class I models are enclosed with fully isolated plastic case to prevent users from hazardous shock. Using the same case as MDR-20, the 22.5mm in width complies with the slim trend that the precious space on the industrial rail can be saved effectively. Featuring up to 85% of efficiency, this series can be cooled by only free air convection up to 70℃ that significantly increase the reliability and lifetime of the power supply.
Power supply series from SL Power Electronics
SL Power Electronics, a leader in the global AC/DC internal and external power supply market, announces the first model in a new series of high power supplies for the commercial and medical systems markets.
100W AC/DC Slim DIN Rail Power Supply with PFC
MEAN WELL has announced the introduction of new miniature DIN rail switching power supplies, MDR-100 series, for the fast growing demand of low wattage DIN rail applications. These Class I models (with F.G.) are enclosed with fully isolated plastic case to prevent users from hazardous shock. The design of universal AC input makes the worldwide installation more easily since users can get rid of bothersome input switch selection.